i want to print the results of my SELECT statement, but im unsure of how. This is the code i've written so far:
Private Sub ProcSelectRecords()
Dim MyConn As ADODB.Connection
Set MyConn = New ADODB.Connection
[code]......
I'm trying to run a query and display the result in a listbox. I can do it for a datagridview but not for a listbox .
Code:
Private Sub frmNieuweActie_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
strSql = "SELECT Acties.Actieid, Acties.Actie " & _
"FROM(Acties) " & _
[code]....
I get the correct amount of items in my listbox but it displays "System.Data.DataRowView" as item .
I would like to post the result of a query in a textbox. [Code] Suppose this is my table, then I would like to post the sum from aantal from in a textbox. For UserID 1 it would be 35, for UserID it would be 35, [Code] but how do I get the result in my textbox?
View 2 RepliesBelow is my formula for a field in my report. All fields are of value type 'Number'. When I try to save the formula it gives me error "The result of selection formula must be a boolean." Why is this? Sometimes it does not catch it as an error, but when I actually run the rwport with real data, it shows the error again. Sigh.
[Code]...
I have a situation to show response coming back from host in some control of a Form and want to print it.The response is coming from Host mainframe system in text based format. I want to show the response in a graphical format. I am looking for suitable control that help me to print and should look like word document. I looked PrintPreview and PrintDocument controls but my requirement is there should be some control on Form where my formatted output should be placed (like Rich Textbox). Which control I should use.
View 6 RepliesI want to ask about looping
if i have big looping, and i want to print it result real time, how can i do it?(it look like when we scanning with antivirus, then the label that contain location that scanning change real time)[code]...
Does anyone have any code snippet on how to get the pixel color of an hwnd using GetDIBits and print the result as a RGB value? I used copyfromscreen method and getpixel but it cannot processes it in 1ms timer interval.
View 8 RepliesI'm trying to lern VS 2010 from VB 6 and one of the things i'm hawing a problem whid is control array.In vb 6 if you create a text box it's named "Text1" and if you yust copy it and paste it it renames to "Text1(0)" and the new one's name is "Text1(0)" and the code would lock like this
[code]...
then it would print for each loop the random result in one of the text boxes corresponding to i.
How do i do this in VS 2010?
I drawn graphics in picture box that its content is report that i create by myself. then i want to print it.how I print it for more than one pages?
View 1 RepliesI want to print one of my databounded datagrid. I found this code in knowledgebase here: [URL]
Can i ask about this datagridprinter usage?
may i use shortcut key like Ctrl+P to print the report in Crystal Report Viewer?
View 2 RepliesI have an Access XP database with two linked tables and a maketable query. I need to first run the Query through VB 2005 and then get the data from the resulting table created. But I get an error when I run the query as follows. I am getting the SQL Select statement from the SQL view in MS access after I create my Maketable query So it should be ok. I am saving the select in a hidden text box on my form.The query text :
SELECT [SWX-Seats].[Asset #], [SWX-Seats].Account, [SWX-Seats].Product, [SWX-Seats].[Seat Id], [SWX-Seats].[Serial #], [SWX-Seats].Qty, [SWX-Seats].[Entitlement End Date], [SWX-Seats]![Entitlement End Date]-[NS-Seats]![Exp Date] AS DaysDiff, [NS-Seats].[Exp Date] INTO
[code].....
I have developed an ASP page in Visual web developer that retrieves the data usingan AccessDataSource object. I have the following UPDATE Command:
[Code]...
I am asked to write a front end program in VB 2005 (that will run in client computers which running on Win XP) to access an existing MySQL database running in Linux. It is not my preferred choice, but the user have the database and server working just as he wants it, and do not wish to change, at the same time I do not wish to change programming language. Is that even possible? Can we actually write VB 2005 programs that will run in client computers complete with NET framework 2.0 to access a Linux operating database?
View 4 RepliesI have some reports that I use with the MS ReportViewer and I need to get a count of the physical pages (as opposed to logical page count) to use with a print dialog. I've implemented a workaround so the ReportViewer control displays the correct number of physical pages, but is there a way to get that value from the ReportViewer control? The only publicly accessible property gives the logical page count.
[Code]...
I am currently having a headache on how to solve this problem that i am facing. here is the situation: I have a combobox and a list box on the main form. The combobox will get the data from the ms access database. In the database, i have the details of a person's IC, Name and DOB say for eg on one entry I have D215311523C,SHAWN,13/04/1987 So now, my combobox on form load will show the list of dates in the database to allow the user to search base on the date itself by clicking on the selected date. So when the user clicks on the particular date say 13/04/1987, people in the database whose birthday is 13/04/1987 will be shown on the listbox.Meaning to say if i have 3 entries whose dates are the same 13/04/1987, 3 entries will appear. If there is only two entry, then two results will be shown. But now, when i do a single click on the date, one result will be shown. That is correct. But the problem is when i click on the same date again, three of the same results will be shown on the list box. that is it will display : 13/04/1987 13/04/1987 13/04/1987 which is not the case. Then it will show more duplicates of the same results if i click more times on the same date which should not be the case.
Dim n As Integer
Dim numbers() As Integer
Dim StartFrom As Integer
Dim EndAt As Integer
[code].....
I am using a datagrid in my where i am having four columns. In first column the parameter values are entered and in the second column measured value is entered and in third column the nominal value is entered.Inthe fourth column the result is displayed by subtracting the measured value and nominal values. I am doing this calculation in Datagrid cell validated event. What i want is,there will be many rows in the grid,when typing the value in the third column the corresponding result will be displayedin the rowof theresult column,save button will be displayed while the form loads,when the calculate part is completed that is there should not any cell of the resut column empty then i should enable the save butto.
View 2 RepliesI am encountering the following issue So i have a device that sends stuff at the serial port, i then parse it and put it into an array of bytes like that:
Dim HCI_Command_Rcvd_Byte() As Byte All good till here What i wanna do is make an array and put this result every time the serial port gives me a new result, for example:
[Code]...
Basically what i wanna do is let the port parse the messages, fill in the array with the result at an empty spot in this array and then i will have a separate thread that will look in into this array in each non empty space and after it looks into the non empty space it will use or discard the info and also mark this space as empty (after it checked)
I just read about DataSet in VB.NET, it uses disconnected concept. My question is: if my apps has "List All" button that query data from 1 table in the database, and that table has "very very very" many rows, so my DataSet will be filled with those data and eat up memory. Can I limit the data that being put to the DataSet from that query? But I want to be able to retrieve the next data from the same query if the user want to see it?
For example:
I have 1000 rows in my database, and i query all of them. But I just want 200 rows being inserted to my DataSet, but if the user want to see rows number 201 and so on, I want to be able to retrieve the next 200 rows, and so on. So it just like cutting those data into a group of 200 rows. Can I do this with the concept of "disconnected" of the DataSet?
I have set up a method in vb.net and in xcode for encrypting a string using as far as i can tell the same parameters for an AES encryption.I've looked all over the place but cannot find information on whether they use the same encryption algorithm and settings.
this is the vb.net code:
Dim encryptAES As New AesCryptoServiceProvider()
Dim encoding As New UTF8Encoding()
Dim encryptor As ICryptoTransform
encryptAES.Key = encoding.GetBytes("12345678901234567890123456789032")
encryptAES.IV = encoding.GetBytes("1234567890123416")
encryptAES.Mode = CipherMode.CBC
[Code]...
Here's my work.
[URL]
How can i print the search result.
I have been able to do the exercise's in the first 2 chapters and half the exercise's in the third chapter of the text book (programming in visual basic 2008, Julia Case Bradley & Anita C. Millspaugh). but this one is making my head want to explode. please point me in the right direction with this.
Heres the problem. The company has instituted a bonus program to give its employees an incentive to sell more. For every dollar the store makes in a four-week period, the employees receive 2 percent of sales. The amount of bonus each employee receives is based upon the percentage of hours he or she worked during the bonus period (a total of 160 hours). The Calculate button will determine the bonus earned by this employee, and the Clear button will clear only the name, hours-worked, and bonus amount fields. A Print button allows the user to print the form. Do not allow missing or bad input data to cancel the program; instead display a message to the user.
Here's my code so far. its giving me the wrong results. i have tried many different ways,(hence the commented code) but I just dont know where im going wrong.
Public Class VB_Sales
Const BONUSHOURS As Decimal = 160
[CODE]..............
Attached image(s)
i want to populate a report and print it directly without the user hitting the print button.
i have this working in a diffrent project but for some reason it wont work in this one.
i get the error missing parameter, on the last line of my code
Dim paramFields As New ParameterFields
Dim paramField As New ParameterField
Dim discreteVal As New ParameterDiscreteValue
[Code].....
Anyway, I was just wondering if anyone knows how to do these from a simple text box. i.e. 'TextBox1'.
I'm just learning VB and it's only a simple text editor but I can't find any good sites or posts that help me in understanding how to do it. These are not really covered in any of the 'beginner' books I have acquired either.
My instructor told us how to print documents and how to use databases. What the instructor did not mention is how to print or print a preview of records within a DatabaseDataSet. The book "Programming in Visual Basic 2010" does not explain how to print or do a print preview of Database Source records from within a form. The only thing I was told was to test the print document first before you try to do a print preview. Within a form I used a DataGridView to add, delete, and update the database. So now all I need to do is figure out how to print the updated records from the DataGridView and how to print a preview of the records within the DataGridView. So I hope my question is clear enough to give me assistance on how I can perform these two actions. Thanks this would be a great help, and since the class is online we can get assistance from any sources that we have.
View 5 RepliesI'm very very very new to VB.Net and am doing a class project. I want the user to simply clicka print button and get a printout of an existing Word document. Is this possible and if so, can someone suggest the code?
View 7 RepliesI am using the below mentioned code in my VB.net application to print two copies of pdf document.
[Code]...
Basically on my form I have a listbox containing data. Under the listbox I want to place a button named "btn_PrintData" or something to that effect. The user will click this, the print dialog box would come up and bingo they could print the contents of the listbox.
View 1 RepliesI got the code working properly but i am kinda clueless on print & print preview on tool strip menu.
Public Class Form1
' Declare Global-Level variable.
Dim RateDecimal(,) As Decimal = {{1D, 1.5D, 2.4D, 1.85D}, _
[CODE]...
How do i add a simple print button in vb 2008 to allow me to print the form?
View 1 Replies