I have an app where in some of the DataGridViews I am able to easily highlight a segment of text within a cell, do a Ctrl-C, and then paste it into some other app. Only the highlighted text gets copied, which is what I expect.
However, with some of the DataGridViews, I try to do the same thing, but it will copy all of the cell's text, not just the portion highlighted.
I've scoured the cell, column and DataGridView properties and can't figure out what controls that ability.
i am actually loading a saved datagridview schema and data from xml files, i then want it to read the cell in column 8, row 2 and put it in a label.im using visual basic express edition 2008
how to copy a selected DataGridView cell to a textbox. Meaning when I double click a cell it's content is the =Textbox.text. Maybe something in the click event and datagrid selection. Don't know how though.
I am attempting to copy the value of the TimeStamp in cell A6 which has the NOW() formula into cell A5 Based on a change in Cell A4. The catch is I don't want it to update every time the sheet is recalculated due to updating links in other cells on the sheet. ONLY when Cell A4 Changes. What do I do?
I'm attempting to copy cells, one at a time, from an Excel 2003 (or 2007) spreadsheet to a Word 2003 (or 2007) table. I'd like the code to be version-agnostic, and so am using late binding. The formatting of the contents of the Excel cell, such as color, underline, strike-through, needs to be preserved. My approach is to use a Word doc as a template. It has a table at the top which I can copy to the end of the doc, add rows as needed, and fill in the word table cells with the data from the excel spreadsheet. Unfortunately, all the formatting disappears. All I get is the text itself.
Have this code so that when a checkbox in a column of my datagridview is checked, then the corresponding cell in column 2 (of the same row the check box is in) will turn blue with font color white.
[code]...
I'd also like to add a line so that as well as the cell going blue, the bottom border of the cell disappears, so cellborderstyle = none.
I have a DataGridView with several columns. One column is a TextBox column named "Status". This column can only show one of three values: 'Final', 'Ready', or 'No Reportable'. I want to have some code that would turn the TextBox cell into a ComboBox cell when the user left-clicks on the cell to allow the user to choose one of these three options. When the user clicks elsewhere or the cell loses focus I want the cell to change back to a TextBox cell.
Here is what I have so far, but the code throws an exception indicated below Plus, I don't think the code would remove the combobox when the cell loses focus.
Exception: "Provided cell does not belong to this DataGridView control."
Private Sub dgvCalculatedResults_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles dgvCalculatedResults.MouseDown Dim ht As DataGridView.HitTestInfo = Me.dgvCalculatedResults.HitTest(e.X, e.Y)
In cellEndEdit event I need current cell editedFormatedvalue ( well it is done) now my question is can we get the old value of the cell in this event or have to handle some other event for this means let I have a cell in which current value is abc and when I edit it it become def now I want to get both the values in cell end edit event ( or any else ) but finally I have to perform task on cellendedit
I have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event.
My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?
I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
I have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event. My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
What I need to do is if the table has a row then copy the text out of a cell to a radiobutton. The text I have so far is: If EXISTS(ds.Tables("DogBasic").Rows(0).Item("DogName")) Then RBDogName1T.Text = ds.Tables("DogBasic").Rows(0).Item("DogName").ToString Else RBDogName1T.Text = "Add Dog" End If [Code] .....
But I get an error: Error 1 'Exists' is not declared. It may be inaccessible due to its protection level.
I have a DataGridView where Cell_Validating is being done. I have a Cancel button on my form that allows the user to exit out of the DataGridView changes. The problem is that if a cell was currently flagged as in error, I cannot exit and remove columns from the DataGridView. I get the following error: Operation did not succeed because the program cannot commit or quit a cell value change. Is there a way to cancel the validation once the focus has been removed from the DataGridView? Here is my Cell_Validating
I have just found that if a DataGridView image column's size (height & width - in pixels) is smaller than the image's original size (in my case all images are exactly 180 x 180 pixels) at the time the cell is populated then the image is automatically being converted to a lower resolution I assume to fit the image completely within the size of the cell). How can I stop the automatic scaling of the image?
The image below show the same file displayed twice, both at 60x60 pixels ('Thumbnail' column) and a blowup of the image (PictureBox populated via the CellMouseEnter event) to it's right. You'll notice the resolution of the first blowup is far less the the second. so, what made the difference in the resolution of the blowups is? In the second blowup's case I'd first stretched the image column's width to ~180 pixels and set the row height to match (via the ColumnWidthChanged event) then populated the DataGridView then stretched the image column to 60 pixels (its minimum).
I wish to have a list selection inside a cell of it. like when the cursor is placed in a particular cell and the user hits 'Tab' button in keyboard a list of names & no should be listed and they have to select a particular name, click a particular row in the list form, which in turn needs to fill the cell with the name value.m
There are 3 columns(Count,Item,Price) in datagridview which is bound to a datasource. The count is 1 by default and it should increment by 1 when i click on a button,so the count would be 2 if i click button again
i have a datagridview which i populate of a dB. i have 3 columns on the dgv Account ID, Account Type and Notes. i created an add record button, that enables the user to add records. Account ID is a numerator in the dB, and i would like to automatically add 1 to the numerator. however i can't get the value of the last cell in the last row. for now i am using
Dim RowCount As Integer = Me.grdAccountTypes.RowCount - 1 Dim AccountID As Integer = grdAccountTypes.Item(0, RowCount).Value MessageBox.Show(AccountID)
How to do that no one cell is selected in DataGridView at first moment? (There are some controls in my form before the DataGridView and I don't want that any element of DataGridView is selected when the form is loaded).
I have a datagridview which have a ComboBoxCell, ComboBox is bound to data,, I want to use it as Traditional ComboBox,, I mean I want to display its Item (from display members) on the base of its value.
For example: When I do this Datagridview1.CurrentRow.Cells(4).value = 4 'Cell 4 is the DatagridviewComboBoxCell
It gives me the error that "DatagridviewComboBoxCell.value is not valid",
But I want that this combobox should Select And Display the item which value is 4.
I'm using VB.Net.'m using DataGridView with ColumnType = DataGridViewTextBoxColumn.
I have 3 columns. Column1, Column2, Column3. for example:
Column1 Column2 Column3 1 AA AAA 2 BB EDIT 3 CC CCC
If column3's value = "EDIT", then I need to edit only that cell. Here for example: i need to make the Column3's second cell to be readonly=false.So i cannot make any changes to (1, AA, AAA), (3, CC, CCC) and (2, BB). Need to make changes only EDIT cell.I tried this code. CountR is the row in which EDIT values is there.
how to change the Cell Alignment depend on the conditions. If cell value is text then cell alignment should be Left and If cell value is Integer then cell alignment should be Right.
I am going to change the Default Cell Style property then all cell alignments are changing.. But i want to see if cell value is Integer then the value starts from Right Side...
I have several date fields in a datagridview, in sql these are saved as navchar fields. If the user needs to clear the date they can do so by highlighting the field and pressing the delete key. This clears the date no problem, unfortunately it sets the field to Nothing or "" (a blank). I need it to set it back to NULL for reporting purposes.
Here is the relevant part of the code: Private Sub dgvWeldingLog_CellEndEdit(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles dgvWeldingLog.CellEndEdit Try If dgvWeldingLog.Columns(e.ColumnIndex).Name = "dgvtxtDateWelded" Or _ dgvWeldingLog.Columns(e.ColumnIndex).Name = "dgvtxtFitCheck" Or _ [Code] .....
If there is an error in the data entry then the form cannot be saved. When I trap DBNull.Value is says it is equals to "Nothing" and not "NULL".
Currently I am using this code to fill my datagrid. Dim da As New SqlDataAdapter("Select id, name, type, add1 from [company_details]", con) Try If Pdetails.Visible = True Then con.Open() Dim ds As New DataTable [Code] .....
How to get the data I want from a datagridview box. Simply Put, What I need to do is get every value from each cell in a row. So if row one is highlighted I need the Name, addy, and so on....from that row.
