DataGridView Image Cell Losses Resolution If Cell Size Is Smaller Than The Image Size?
Apr 30, 2012
I have just found that if a DataGridView image column's size (height & width - in pixels) is smaller than the image's original size (in my case all images are exactly 180 x 180 pixels) at the time the cell is populated then the image is automatically being converted to a lower resolution I assume to fit the image completely within the size of the cell). How can I stop the automatic scaling of the image?
The image below show the same file displayed twice, both at 60x60 pixels ('Thumbnail' column) and a blowup of the image (PictureBox populated via the CellMouseEnter event) to it's right. You'll notice the resolution of the first blowup is far less the the second. so, what made the difference in the resolution of the blowups is? In the second blowup's case I'd first stretched the image column's width to ~180 pixels and set the row height to match (via the ColumnWidthChanged event) then populated the DataGridView then stretched the image column to 60 pixels (its minimum).
I have a datagrid where the first column is for image button for expand purpose. The visibility of the image depends on some conditions row by row. I am trying to handle this in ItemDataBound event, and using e.item.cell(0).findcontrol("imageButton").visible = false. The first cell of this row therefore disappears even that the size is specified in the ItemStyle tag.
I use some code to successfully resize and save images - but I want to save the image to 800x800 px size on a canvas of 900x900px so it has a white border type thing around it.
I need to limit a Textbox and DataGridView to only enter text in the fixed size of the cell/textbox on the screen. So I have limited the cell/textbox so user can not change it size. Both allow multiline and wordwrap. cell/textbox is sized to accept 5 lines of data (wordwrap or enters) This is like an online form.So the text enter will be printed so I can not allow scrolling in the cell/textbox.
How can I stop the scrolling of the text inside the cell/textbox.
Also : if the user Paste into the cell/textbox how to truncate text if larger than display area.
Try it yourself: Plug in a USB flash drive (just a normal one with a single primary partition on it, as is the manufactures configured) to your computer.
Run WIM "Select * From Win32_DiskDrive"
Note the USB drive's size (in my case, it is a Kinston DataTraveller G3 2GB drive):
Win32_DiskDrive instance
BytesPerSector: 512
Caption: Kingston DataTraveler G3 USB Device
[CODE]....
Why the partition is bigger than the disk on which the partition is created and just a part of the disk?
I am working with vb.net and want to increase the size of image when the cursor is over that image, but the image should come back to its original size when the cursor leaves that image area.I've used the following code to increase the size of image:[code]I've used the default size class but, it gives some different dimensions.by the code that brings the image into its original size that I've been declared into the picture box properties.
I want to display image next to the text in each row in a datagridview. I have searched the net in the past 1 hour, but no big success. I know, that I must override the cellpaint event, but how?
I'm aware that the tooltip object can contain an image. I am unable to make an image popup when the mouse hovers over a datagridview cell, since it is not possible to attach a tooltip object to a cell ( myTip.SetToolTip(gridCell, "Hello") generates a compile error)
I am trying to split the image into 9 equal regions , and the below code does it well the problem is i want to get the selected image size and not picturebox sizeso what should i change to get the selected image size instead of picture box sizei dont want the picture box to grow in size with image because it will hide other buttons/textboxes etc
Dim xi As Integer = (PictureBox1.Image.Height) Dim yi As Integer = PictureBox1.Image.Width Dim px As Integer = xi / 3
My program parses chat room text. In the room there are smileys that get displayed. What I'm trying to do is parse out the image URL, download the image and put the smiley in the correct spot between the text of the message.I can do the parsing and downloading of the image into the datagridview but this only works of the column is set as an image column. Obviously due to the nature of the program I need to be able to put both text and images into the same cell. How can I do this?
I was thinking to add another column named "Symbol" and based on the "Status" column to format the cells of the "Symbol" column to display an image.
I edited the DGV, and add a new image column.
I created a directory in my solution called "references" where I put all the .bmp files
I don't know how to do this. My first thought was to put an expression in the DataTable Properties, but I didn't manage to make that work. Another way is to format the cells in the "Symbol" column, and again I don't know how to do that. I tried with "Select Case ... Case ... End Select" with no success.
LE: Should I Insert the .bmp files into SQL database (varbinary(MAX)) If yes, how?
I'm trying to make a visual map editor, and figured that a DataGridView would be the best way to go. I would like to make it so that you can click one of many buttons to set which new image the grid cell will be set to when you click it. I've set up pretty much everything except that I can't figure out how to set the background image of the cell that I clicked.
As I have no idea on how to retrieve access data at the specific location in the table, so I wrote VBA code t export the entire access database to a datagridview which is located in the form1. There's a column of datagridview contain complete address information of a image. I'm thinking a way to link image source (of form 2 or xaml file) to the the column so that the image will be displayed. is there any code to get cell value at the specific location in the table? In excel VBA, sheets("Sheetname").Cells(rownumber, columnnumber).value is used to get the cell value, but how about code for this case?
I have a form which contains an Image control. What I am trying to do is find a way to adjust an image according to the size of the control and have the image look normal no matter how I adjust the Image control. I want the actual image to fill the Image control completely and not loose any integrity.
I'm writing a Cleint/Host program that sends a image over tcp (from printscreen, not a file) to the host. Everything seems to work fine and the image is transmitted and displayed in a picturebox plus saved to a folder. The problem is when the printscreen is bigger than 176040 B. First the limit was 128000B but after setting the sendbuffersize and recivebuffersize to 1000kb the limit is 176040 B. Could it be a limit in the tcp protocol?
Here's the client code
Code:Imports System.NetImports System.Net.SocketsImports System.IOImports System.DrawingImports System.Drawing.Imaging Public Class capture
I am working on an program and I need it to change the size on the form and the button etc when its ran on a different resolution then it was coded on. Is there anyway to do this easy or do I have to hard code it on two different and change it by like a button etc? I am working with a 1024 X 780 and a 1240 X 1024.
I have an image column in a dgv. I set the value from My.Resources.XXX.How can I compare the value of the cells with an image in the resource? dgv.rows(0).cells(0).value=My.Resources.S_DEFECT don't seems to work. I tried it with object.equals, but no success.
Have this code so that when a checkbox in a column of my datagridview is checked, then the corresponding cell in column 2 (of the same row the check box is in) will turn blue with font color white.
[code]...
I'd also like to add a line so that as well as the cell going blue, the bottom border of the cell disappears, so cellborderstyle = none.
I have a DataGridView with several columns. One column is a TextBox column named "Status". This column can only show one of three values: 'Final', 'Ready', or 'No Reportable'. I want to have some code that would turn the TextBox cell into a ComboBox cell when the user left-clicks on the cell to allow the user to choose one of these three options. When the user clicks elsewhere or the cell loses focus I want the cell to change back to a TextBox cell.
Here is what I have so far, but the code throws an exception indicated below Plus, I don't think the code would remove the combobox when the cell loses focus.
Exception: "Provided cell does not belong to this DataGridView control."
Private Sub dgvCalculatedResults_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles dgvCalculatedResults.MouseDown Dim ht As DataGridView.HitTestInfo = Me.dgvCalculatedResults.HitTest(e.X, e.Y)
i made a webpage with a drop down list...so when i click on the drop down list and click on the item there, a box will pop out i dont want the browser box to be the standard maximize internet explorer browser size or standard minimize internet explorer browser size...i want it to be in a A9 or A10 paper size the moment I select an item and it pops out...
I am using VS2010 and have an application that lets the user search for an image to store on a SQL database. I want to be able to reduce the size of the image when it passes certain size for obvious reasons.
I have a picturebox with a tiled background image (plane white bitmap), and an "image" resource centered in the middle of it, I would like to chance the size of this centered image within the picturebox.
I tried:
picScaledRepresentation.SizeMode = PictureBoxSizeMode.CenterImage picScaledRepresentation.Size = New Size(Width, Height)
But this just changed the the size of the whole picturebox, rather than the image within it.
I'm currently working on a school project. And a part of the program is to 'change' the images. All images added are BMP-files. But the output has to be JPEG. Now there are 2 other problems:
- The width of the image should be between (70-165 ) Pixel and the height between (65-185 )Pixel - The filesize of the image should be between (3-4 KB)
I know how to change the width/height, but it's hard to make the filesize between 3-4 KB.
