I have a form which contains an Image control. What I am trying to do is find a way to adjust an image according to the size of the control and have the image look normal no matter how I adjust the Image control. I want the actual image to fill the Image control completely and not loose any integrity.
View 2 RepliesI use some code to successfully resize and save images - but I want to save the image to 800x800 px size on a canvas of 900x900px so it has a white border type thing around it.
View 8 RepliesI've been investigating and experimenting with the code snippet on this page: [URL] - with some rather undesirable and wacky results being produced.
Why do I need this? I am attempting to adapt this snippet to suit my needs for a day/night system in the game I am working on. I am sure that the correct results can be produced with this snippet, but at the very least I need some guidance as to how I can achieve what I want.
Im attempting to make this tank fire a "bullet" or bullets. It fires them just fine bu leaves a trail behind and I need it to refresh and remove previous images so its a smooth action. I thought this code below was going to work but its not.
Class:
Public Class Bullet
Dim image As Image = My.Resources.Bullet_1
[code].....
I've developed an application that acquires images from my Logitech QuickCam Pro 9000 using WIA. The problem is that I cannot figure out how to adjust the quality of the image taken by the camera. The camera has a 2MP lense, but the program will only acquire a picture of 320x240 pixels, which is the lowest resolution the camera has. How do I tell the camera to take a picture at one of it's other resolutions? IE: 640x480, 960x720, 1.3MP, or 2MP?
[Code].....
I'd like to verify if an image control has an image loaded . If it does , I want to unload that image (and load no image) , but if the image control has no image loaded , I want to load an image . Is it possible ?
If ImageMY.Image.Equals(Nothing) Then
ImageMY.Image = System.Drawing.Image.FromFile("C:ImageBlaBlaBla.jpg")
Else
[code].....
I have just found that if a DataGridView image column's size (height & width - in pixels) is smaller than the image's original size (in my case all images are exactly 180 x 180 pixels) at the time the cell is populated then the image is automatically being converted to a lower resolution I assume to fit the image completely within the size of the cell). How can I stop the automatic scaling of the image?
The image below show the same file displayed twice, both at 60x60 pixels ('Thumbnail' column) and a blowup of the image (PictureBox populated via the CellMouseEnter event) to it's right. You'll notice the resolution of the first blowup is far less the the second. so, what made the difference in the resolution of the blowups is? In the second blowup's case I'd first stretched the image column's width to ~180 pixels and set the row height to match (via the ColumnWidthChanged event) then populated the DataGridView then stretched the image column to 60 pixels (its minimum).
I want to change the size of the images in javascript onmouseover.Dim files As String() = Directory.GetFiles(Server.MapPath("~/Folder1/Folder2/"), "*.jpg")
For Each File As String In files
File = File.Substring(File.LastIndexOf("/") + 1, File.Length)
'Response.Write(File & "<br>")
File = File & "~/Folder1/Folder2/"
[Code]...
control Paste (Ctrl+P) Image size in RichTextBox I can do an context menu with a item of Paste, and in it I can control what image type is (width, height, resolution, format...), then for example I can msgbox when the user try to paste (using contextmenu) a too big image. but if the user uses Control+P the paste occurs whitout my code.
[Code]...
Is it possible to customize the tab control such as insert an image in front of the text or increase the size of the tabs?
View 2 RepliesI'm writing a Cleint/Host program that sends a image over tcp (from printscreen, not a file) to the host. Everything seems to work fine and the image is transmitted and displayed in a picturebox plus saved to a folder. The problem is when the printscreen is bigger than 176040 B. First the limit was 128000B but after setting the sendbuffersize and recivebuffersize to 1000kb the limit is 176040 B. Could it be a limit in the tcp protocol?
Here's the client code
Code:Imports System.NetImports System.Net.SocketsImports System.IOImports System.DrawingImports System.Drawing.Imaging
Public Class capture
[Code].....
i am creating a table in vb.net code (htmltable) with htmltablerows and htmltablecell. I gave on image control but thatr control cant have the .imageurl property, which i need cause i have a handler image.ashx which brings image from the database.
heres' the code -
TD = New HtmlTableCell
Dim img As New HtmlImage()
img.ID = "image_" & rd("ID")
[code]....
on the last line, "img.ImageUrl" i get this error -'ImageUrl' is not a member of 'System.Web.UI.HtmlControls.HtmlImage'how do i fix this?
I'm trying to update pictures boxes with images of controls stored in an imagelist owned by a control. The images stored in the control.imagelist do not showup in the picturebox. I'm working on simplifying the code to post, but for now could use help.If I store the image in a member variable owned bythe control it woks fine.Something to do with persistance of images in control owned imagelist? [code]
View 2 RepliesI hoping to find a current and simple way to do this. I'm using VWD Express 2008 and SQL Express 2008.I'm able to get the client's path to the image file using an asp:FileUpload control on the web form.
How do I upload the client's image file and display it in the web form's image control?How do I save it to the sqlserver? The image table is already set up with a "Image" data type column. Can the image be saved to the database as simply as other data types?
find a current and simple way to do this. I'm using VWD Express 2008 and SQL Express 2008.I'm able to get the client's path to the image file using an asp:FileUpload control on the web form.How do I upload the client's image file and display it in the web form's image control?How do I save it to the sqlserver? The image table is already set up with a "Image" data type column. Can the image be saved to the database as simply as other data types?
View 3 Repliesi am trying to draw a iamge in an mspaint control, and then put that image into a richtextbox but it will ask for save file and file has been saved i want to show image in richtextbox as soon as click on save file in dialog window.
View 2 RepliesHow do I draw an image respectively on the PictureBox control and Image object? Welcome to the All-In-One Code Framework! If you have any feedback,
View 1 RepliesI have entered an image in sql server database successfully. Now i want to retrieve this image from database and show it in an Image control. I don't want to put any ListBoxes on the page. I wrote in ASP dot Net..
Dim MS As MemoryStream
Dim IMG As System.Drawing.Image
Dim FS As FileStream
[code]......
I am working with vb.net and want to increase the size of image when the cursor is over that image, but the image should come back to its original size when the cursor leaves that image area.I've used the following code to increase the size of image:[code]I've used the default size class but, it gives some different dimensions.by the code that brings the image into its original size that I've been declared into the picture box properties.
View 2 Repliesi am hoping that the possibility to locate all the controls that contain a certain image from the resources, and swap out that image for every control that contained it, will help me narrow down on the simple coding.
something similar to:
for every control that contains backgroundimage=my.resources.imagefound
replace backgroundimage=my.resources.imagereplaced
i tried the above code and it did not work.. lol..
I am using a kodak image control in my windows application using vb.net. Now, My Question is that how can i get the initial size and make zoom in and out work?
View 1 RepliesI am trying to split the image into 9 equal regions , and the below code does it well the problem is i want to get the selected image size and not picturebox sizeso what should i change to get the selected image size instead of picture box sizei dont want the picture box to grow in size with image because it will hide other buttons/textboxes etc
Dim xi As Integer = (PictureBox1.Image.Height)
Dim yi As Integer = PictureBox1.Image.Width
Dim px As Integer = xi / 3
[code]......
Set picturebox size to size of image file?
View 5 RepliesI've a form set to size 1240:750. On my PC where I've VB2010 installed, the screen size is set to 1680:1024 and the form can be viewed fine but on a PC with screen size set to 1280:1024 (higher than the form) the form in question is cropped almost a third of it. To adjust the form to everyone screen size I set the below code at load with no avail.
'Autosize form to screen
Me.Height = (SystemInformation.PrimaryMonitorSize.Height) * (0.9)
Me.Width = (SystemInformation.PrimaryMonitorSize.Width) '* (0.9)
Me.MaximumSize = New System.Drawing.Size(Me.Width, Me.Height)
Me.MinimumSize = New System.Drawing.Size(1240, 750)
Does anyone has a sample code or idea for cutting and adjusting a picture size when it is uploaded thru picturebox?
For example..
1. Picturebox size on winform = 150*150
2. A picture size = 1024 *800
3. I want to be able to cut 150*150 out of 1024 *800 and upload it. I wish the cutting and adjusting size is possible thru winform.
I've come up with a workaround, that isn't quite working.I have an image displaying nothing and several images displaying different stuff.When button1 is clicked, I want the image displaying nothing, that is image1, to display what one of the other images are displaying.I tried image1 = display1...I get no errors, but it doesn't work... Image1 has not changed. Its not displaying anything..
View 2 RepliesI want to know how to find the image size in kb if the image is from a web site?
View 4 Replieshow to check the of image size if he strored in DB and Dispay In the PictureBox
View 2 RepliesIn My VB.net application I select one image from my PC. How I know the size of the image.
View 2 RepliesI am using VS2010 and have an application that lets the user search for an image to store on a SQL database. I want to be able to reduce the size of the image when it passes certain size for obvious reasons.
View 1 Replies