Is it possible to multi select cells in a DataGridView over several rows?
Example:10 columns, 2 rows
Say I click and hold in row 1, column 5. If I then go down to row 2 column 5. I want column 5 to 10 in row 1 and 1 to 5 in row 2 to be highlight.
when u select any cell in tablelayoutpanel i need to show selection Handlers around the cell. But it's not dispalaying correct way when u select any cell in tablelayoutpanel i need to show selection Handlers around the cell ..But it's not dispalaying correct way..
[Code]...
which event is for cell or row selection via keyboard in the datagridview?
View 6 RepliesI was thinking get the row index and then the cell index and using that to get the specific cell I need somehow but I do not know how to get the specific cell, so would this be easiest if so what command would I use to get the information from the cell, if not how would a better way to do this be?
I cannot find the way to get the row index if one exists so I am guessing it does not exist with this method so how would I go about getting the information from a specific column of a selected row?
[URL]
Have this code so that when a checkbox in a column of my datagridview is checked, then the corresponding cell in column 2 (of the same row the check box is in) will turn blue with font color white.
[code]...
I'd also like to add a line so that as well as the cell going blue, the bottom border of the cell disappears, so cellborderstyle = none.
I have a DataGridView with several columns. One column is a TextBox column named "Status". This column can only show one of three values: 'Final', 'Ready', or 'No Reportable'. I want to have some code that would turn the TextBox cell into a ComboBox cell when the user left-clicks on the cell to allow the user to choose one of these three options. When the user clicks elsewhere or the cell loses focus I want the cell to change back to a TextBox cell.
Here is what I have so far, but the code throws an exception indicated below Plus, I don't think the code would remove the combobox when the cell loses focus.
Exception: "Provided cell does not belong to this DataGridView control."
Private Sub dgvCalculatedResults_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles dgvCalculatedResults.MouseDown
Dim ht As DataGridView.HitTestInfo = Me.dgvCalculatedResults.HitTest(e.X, e.Y)
[Code].....
I have a DGV with a CB column in VS2008. I would like an event when a DGVCB selection is made (without leaving the cell). It will probably have to be a DGV cell or row event but I can't find one that fires as soon as a DGVCB selection is made.
View 3 Replieshow to change the selected cell round and its selection too?
View 3 RepliesI'm making a datagridview, and I want to remove de cell selection border.
I tried to put these:vb
Private Sub dgvL_CellClick(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles dgvL.CellClick
dgvL.DefaultCellStyle.SelectionBackColor = dgvL.DefaultCellStyle.BackColor
dgvL.DefaultCellStyle.SelectionForeColor = dgvL.DefaultCellStyle.ForeColor
Is it possible to disable cursor moving from cell to cell in datagridview?
View 5 RepliesIn VB.NET 2008 I've two forms 1 & 2 containing two datagridviews connected to two data source 'ACCESS 2007 tables' Now I want to select multiple rows from one datagridview (form1) & transferring these to another empty datagridview (form2) with a button_click.
View 3 RepliesI have a Datagridview called DgvReturns. which contains two fields,
1) Yes - checkbox (boolean)and
2) Received Date - textbox (DateTime)..
What I want to do at run time is that when a user Checks the Yes checkbox Received Date is populated with the current Datetime.
In cellEndEdit event I need current cell editedFormatedvalue ( well it is done) now my question is can we get the old value of the cell in this event or have to handle some other event for this means let I have a cell in which current value is abc and when I edit it it become def now I want to get both the values in cell end edit event ( or any else ) but finally I have to perform task on cellendedit
View 1 RepliesI have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event.
My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?
I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
I have a datagridview and it has 8 columns as textboxcolumns. I am handling their cell validation with cellValidating event. My question is that if cell validation fails for 3rd column of the datagridview then the focus should move from 3rd column to 1st column of the datagridview. How can i do this?I have tried datagridview.column(0).selected = true, when validation for 3rd column fails, but this is not working. Focus still moves to the next cell. I can stop the focus to the current cell with e.cancel=true but i want it to move to the very first cell of the datagridview.
View 13 RepliesI have a DataGridView where Cell_Validating is being done. I have a Cancel button on my form that allows the user to exit out of the DataGridView changes. The problem is that if a cell was currently flagged as in error, I cannot exit and remove columns from the DataGridView. I get the following error: Operation did not succeed because the program cannot commit or quit a cell value change. Is there a way to cancel the validation once the focus has been removed from the DataGridView? Here is my Cell_Validating
[Code]...
based on a selection of name and time i want to add a value or text in datagridview,but it doesn't return a value... this my code
Public
Sub Btnplanner_Click(ByVal
sender As System.Object,[code]......
Am using vb.net 08 and i have a datagridview with 3 columns. The first column has a button as the columntype with the name "UserName". Now, i want if the user clicks only on the UserName which is the first column, but not the entire row, it should display the value of the UserName column only. If other columns are clicked are apart from the UserName, nothing should display. So there will be a for loop that will itera te through all the rows of the datagridview.
So i have something like this:
CODE:
I have been looking all over the place trying to figure out how I can programally select a certain Cell in a row. What I am attempting to do is when doing Rowvalidating, and I find that the user has not filled out a column, I do a msgbox, then want to have the cell have the focus, so user can enter in the data. IE, like the way you can cause a text box to have the focus.
View 4 RepliesI want to know if it is possible to click in one cell, and the entire row be selected.
View 6 RepliesI am using VB 2008. My DataGridView could contain a thousand rows in alphabetic order and I want my users to be able to find a row quickly without them having to scan through many rows. I could provide a row of buttons captioned A to Z or I could provide a search field in a textBox but in either case my program would have to find a particular row and focus on that row. Question one: Does DataGridView have a function that searches for a a particular value in a specified column? I have found no alternative to sequentially searching through the list. Question two: Once I have identified the index to a particular row, how can I make that row become the selected row?
There is so much to DataGridView that somebody should write a book specially about DataGridView. I would buy it.
I have a vb net program that shows a datagridview which pulls data from a mySQL database. When the user clicks on a row (I am checking for a 'cellclick' event), a text box is filled with data from a hidden column in the datagridview. This works fine and runs without error, BUT...When I use the cursor keys to move the selection up or down, the row highlight changes, but doesn't update the text box. I realise that this is because I am looking for a 'cellclick' event, but I don't know how to look for cursor keys as well.
Please could someone tell me what event I should be looking for to capture input via both mouse click and cursor. I have changed the program so it updates the second dgv on 'selectionchanged' but this crashes at run time with an InvalidCastException.Alternatively, is it possible to stop the user using the cursor keys?
I can't for the life of me remember what that first(non column) is called.. its where you it has the right pointer or where it has the * for a new row. Anyways... I don't want to see it.. and want to remove or hide it from the datagridview I am working with...
What is that column called? and how can it be removed or hiden?
I have a DGV that has a check box in the first column to indicate marked rows. After the user marks the rows they want then the OK button is pressed and the form closes. I need the row data that they marked to be transferred some sort of temp db (preferably in memory - 30 rows or less) so I can insert the data to a tabbed UserControl. I also would like to retain that row data while they are working so in case they want to open the form with the DGV again that the previous marked rows show up.
[Code]...
I've a problem with DataGridView component when trying to set the value of the CurrentCell. What i'm trying to do is :
I've a DataGridView With values. I want to make a button in my forms and when clicking on it I want to change the selection from the current row to the next. To explain more, by clicking my Button I want to simulate the effect of a mouse click on a DataGridview.
I have an inconsistency in behaviour when I try to get the CurrentRow after a row has been selected.
If I select the first row in a DataGridView object using the mouse, the DataGridView1.SelectionChanged event fires, and DataGridView1.CurrentRow is the newly selected row (Row 0).
If I select the first row via code however ie. DataGridView1.CurrentCell = DataGridView.Rows(0).Cells(0) then the DataGridView1.SelectionChanged also fires, but CurrentRow is the old row, not the new row.
In fact CurrentRow doesn't get updated until AFTER the SelectionChanged event has fired if you force the row change in the code, but is updated BEFORE SelectionChanged if you do the row change via the mouse or keyboard.
how to check if its the first row if I've moved to the first row using CurrentCell ?
I have a ticketing system that reads a MS 2003 MDB. I can easily fill the DataGrid view with all of the items on the data set How ever I need to be able to have agents filter the rows by login(key)
I have a large list
made this way
csrLogin.Add("james", "TomJim")
I select agents on the menu strip and the combo box populates all the names in that collection (combo box displays TomJim in this instance
I have an SQL query made (I think it is correct)
[Code].....
I'm trying to select a company name from a data bound combo box, then display the relevant record in a data bound datagridview.
I've currently used the Data Sources wizard to set the connection string, create the dataset and dragged the combo box and datagridview onto my form.[code]...
How can i bind a comobox selection to a datagridview without writting code...
i Need to select an item from a combox and based on that item refresh the datagrdiview. I did something like that in Access but i don't know how to make it work in visual studio 2008.
once i select the datagridview itme that i want to edit i'd like to be able to update back to the database. I know i need to write code for this but at least i'll have the data refreshed on the datagridview.
I had created 3 datagridviews dynamically. In each dtatgridview a single cell is selected by default. I want to avoid this default selection how can I do this?In a single form 3 cursors.....Not active but looks very boring.
View 2 Replies