I'm Making a database program I've noticed that the property HasChanged intented to track wether the dataset has changed does not update it's value to True in case of the user has edited the data on the screen till you move to another record
can I know if the user changed the data before the user leaves the current edited record to another
the purpos of this is to alert the user to save data before he mopves to another record or close the form
I have code running in the Datatable.ColumnChanging event in my dataset. This dataset underlies a form and conventional drag/drop controls are in place for data entry.when the event triggers and runs, I am running code in the form that checks the dataset.HasChanges property. It is showing False. But this is immediately after the ColumnChanging event has been triggered.Okay, I see by others posts and MSDN that .HasChanges will only be true after moving off the row with the changed column. I have also noted lots of discussion about the advanced binding property of DataSourceUpdate Mode, but that does not address this issue.I guess I can do this by checking the state of the row for the binding source. Just seems odd that the event behind the dataset can be triggered and that does not change the dataset.HasChanges property.
I am trying to assign a dataset to the TAG property of a textbox control in my application. The code seems to do the assignment without any error but I cant see the property TAG name or the assigned value using quickwatch etc. etc. The TAG property name does show in the design window.
Is this property useable in my version (academic 2002 version 7.0) or does the TAG and any assigned value it holds not show in quickwatch. I can only find 1 reference which seems to suggest the TAG property is not supported in early versions, but would prefer a definitive answer.
In my project, I have a table that has an image column, but with vs2008 it stores the image as bytes. I have the column set to allow nulls. When I save my image I convert it to a byte array. Then when I retrieve that row, I convert the byte array back to the image, no problems. The problem is when there is not an image selected I return Nothing to the datatable, saves ok, but when I try to retrieve that row, The dataset.desinger throw the "value in column dbnull". I can temporary override this error with a code change in the dataset.designer, but it does not stay permanently. How can I override the dataset.desinger property permanently.
Original dataset.desinger code: <Global.System.Diagnostics.DebuggerNonUserCodeAttribute()> _ Public Property Image() As Byte() Get Try Return CType(Me(Me.tableCustomers.ImageColumn),Byte()) [Code] .....
All I did is add the if statement capturing the dbnull and forcing it to return Nothing instead. When I close VisualStudio, then reopen this change is gone. How can I keep this or override it.
I have a datagridview that is bounded to a dataset and when i select an item to the datagridview to delete, I get the correct item. But when i sorted the datagridview to some field, it return a different item. Here is my code:
In a vb .net winforms app I am trying out something for "wide and shallow" children of a record. I use strongly typed business objects ( Strataframe ).My plan is to have a number of "child tables" collected in a dataset I drop on the form. they have no correspondence in persisted data, so the dataset is untyped and I am creating the schema through the property sheet for the tables. Each table is the datasource for a datagridview in the interface.
In my proof of concept sample, My main businessobject (CustomerBO) interacts with a SQL Server 2008 table with fields - pk, name, - and a third column which is currently varchar(max) as I considered XML but could just as easily be varbinary(max) if that works better for holding the serialized dataset.
bo.bigfield will be the strongly typed prop I want to hold the byte() array or XML or whatever that represents the dataset for that record.So, the question in a nutshell - how do I convert a dataset to a single datum and reproduce the dataset from that datum. This is my first foray into datasets, datagridviews as well so if there are better ways to accomplish any of that I'm listening.
I'm working on a helper class that will make things easier for me when connecting to and viewing a crystal report.Now I need to create a Property called DataSource. Crystal has a SetDataSource method that has 4 overloads/constructors(not sure what the right term is)1 accepts a System.Collections.Ienumerable, the 2nd accepts a Dataset, the 3rd a DataTable, and the 4th a DataReader.Now I want my property to be able to accept all those. So what Type must my property be.If I can just have DataSet and DataTable for now it would be fine, as I work with those mostly Public Property DataSource as?
This one copied from microsoft web site, is this command working...? Error like " Executive Reader Requires.......Transaction property of the command has not been initialized..."
When the user clicks an "Edit" button on my form, I want a box to come up which allows the user to edit a DataTable in a strongly-typed DataSet. What's the best way to do this?
I have tried everything I can to get beyond this error which shows below as <<<<< error here. It is trying to fill a dataset from a data adapter. If I change the SELECT statement to just SELECT * FROM xTable I get the correct number of records in each table. But anytime I try with a more complex statement I get the error message shown below which indicates System.Data.Common.DbDataAdapter.Fill(DataSet dataSet. I've completely erased all data and entered a new set of test data so I know there is no problem with relationships. Each table has primary key which is foreign key in other table. IS there something wrong with the Imports section: Imports System
i am trying to copy data from a standard Dataset to a Type Dataset (XSD) of same table structure. i want to use Automapper to do that one. So how can i do that using automapper?
I have two Datagrids, One grid has all the customers garments on it with style number and contact length. The other grid has the users who have garment issued to them. the style number is in both grids. I need to loop through the users grid and say if the contract number is 1 from the first grid then the contract date on the second grid will be todays date + 365 days (year contract) I have looked at using a stored procedure and also a for each command but I am just getting stuck with it all. [Code]
I have a problem saving a dataset which contains rows that i have imported from another dataset. i can successfully view the imported rows in a gridview but i cannot commit the rows back to the database.
Is there a way for implementers of an interface where a ReadOnly property is defined to make it a complete Read/Write Property ?
Imagine I define an interface to provide a ReadOnly Property (i.e., just a getter for a given value) :
Interface SomeInterface 'the interface only say that implementers must provide a value for reading ReadOnly Property PublicProperty As String End Interface
This means implementers must commit to providing a value. But I would like a given implementer to also allow setting that value. In my head, this would mean providing the Property's setter as part of the implementation, doing something like this :
Public Property PublicProperty As String Implements SomeInterface.PublicProperty Get Return _myProperty
I have multiple datasets that I would like to combine into one. There is a common ID field that can be associated to each row. Calling Merge on the dataset will add additional rows to the dataset, but I would like to combine the additional columns. There are too many fields to do this in one query and therefore would make it unmanageable. Each individual query would be able to handle ordering to ensure the data is placed in the correct row.
For Example lets say I have two queries resulting in two datasets:
ok, I've finally got my test database issues sorted out, however now I need to actually modify my existing report to add the two new fields from my test database. I have made a copy of the report so that I am not modifying the original. I have deleted the two old fields and now want to add my two new fields in there. In the Field explorer window, I see an object called "dataset1" and when I expand it, it is using a view that includes fields from the table that I added my two new fields to.
The problem I see here is that I have gone in and modified the view to include these two new fields in my test database - but again, they are not showing up as selectable fields here. I am just assuming that "dataset1" is somehow pointing to the live database again and that I need to change the datasource location.In my solution explorer, I see an object called "dataset1.xsd" but the properties of that do not tell me much about where it is actually pointing to...
I searched on the forum / Internet for the solution how a PropetryInfo object (of a Public property) can reveal if it has a Private Protected Setter ... it was all in vain .... all help I found was about how to "Set" value of a public property having a Private Setter.I would like to know if I have a PropertyInfo object of a public property, how would I know if its Setter is Non Public?
I tried, in a exception handling block, where I did a GetValue of the PropertyInfo object and then called SetValue by setting the same value back... but to my surprise it worked well and didn error out.
I'm having a few problems converting some code into VB.NET from C#. Most of the translating is done, but I am getting errors when I try to run my code, and I can't figure out what is causing them. Here is the Sub I translated.
Public Sub CreateWidget() Dim blue As LCDColor blue.Red = 0 blue.Green = 0
[code]....
The error I receive on this line ("vision.Widgets.CreateWidget(wg1)") reads "In order to evaluate an indexed property, the property must be qualified and the arguments must be explicitly supplied by the user."
start with I was given a program by a friend that was created in Excel 2003 with the help of Visual Basic Editor. He said he used Visual Basic 2003, which he is not 100% sure about. Anyways he used CurLine in the program and when I try to open it in Excel 2007 and then open the Visual Basic Editor and run the program I get the following error:Run-time error '-2147418113 (8000ffff)':Could not get the CurLine property. Unexpected call to method or property access.
I have a very simple class that holds a few public properties - ID, Text, Colour, etc. and a Boolean called 'SelectedItem'. Just like the Checked property on RadioButtons, only one item can have its SelectedItem property set to True within a particular group. Note: there will be several separate groups (lists), each allowed to have only one item with SelectedItem = True.
My first thought was that I would probably just have to handle everything outside of the class, setting SelectedItem to False for every other item in a particular list when another item was selected. But that seems rather inelegant to me. So I've been trying to think of how this might be done within the class. For example: could I perhaps have a private string property called say "GroupName" - set in the New sub when adding a new instance of the class - and then use a private shared method to set every item's SelectedItem property to False, provided the item has the same GroupName as the newly selected item? I would have a go at doing this but I have no idea how to enumerate every instance of a class from within that class, or whether that's even possible. Is it? Or is there another (better) way to achieve my goal? Here is a cut-down version of what I've got so far:
Public Class ResourceItem Public ID As Integer Public Text As String[code]....
As can be seen: instead of instantiating a new ResourceItem and passing that as an argument to the manager's Add procedure, I'm simply passing the details of the new item and the procedure is creating the item from those. I don't know whether this is a good or bad idea - please advise - but I've done it because I couldn't figure out how to make the SelectedItem property only writeable by the manager, so I wanted to avoid having directly accessible objects that could have their SelectedItem property set to True without it deselecting all the other items in the same group. Of course that still leaves the possibility of setting a variable to one of the manager's list items and setting it from there, so I would still like to know how I could prevent that, if possible.
UPDATE: I didn't use the code above in the end, deciding instead to go with Cyborgx37's solution - which seems to work perfectly well for me despite the warnings about best practice. I also realised I would need to use the same class in another scenario where multiple items could be selected, so it was easy to add a Boolean property to the manager to enable that.
I have a listbox binded to a list of objects. For each list item I wanted to have a rectangle whose fill color is determined by a few properties of the binded object. So I did the following:
Made sure INotifyPropertyChanged was implemented on my object.Created a class to expose the properties I am interested in as attached properties.Binded the properties of the object to the attached properties of the rectangle Created a style that uses triggers to set the rectangle fill based on attached properties.
This works, but only the first time the property of the object changes. After that, the attached properties do not seem to be receiving notification when the data object's property changes. I have double checked and my data object is raising the INotifyPropertyChanged event.
I have a weird question and I honestly hope you understand what is happening here: I design my form (using VB.NET) and put on it a few textboxes, comboboxes and a listview. After the design, I want to adjust the TabIndexes for each control on the form. On the right-hand side of the interface is the property box.
I then select the 'TabIndex' property item and enter a number key (for instance 0) for that selected item. I then select the next textbox control and enter the next number (for instance 1) WITHOUT re-selecting the 'TabIndex' property item. As soon as I select the combobox or listview control, the currently selected property item jumps to 'Items' or 'Collections' and does NOT remain on the 'TabIndex' property item. Why is this happening? Everything worked fine and all of a sudden this starts happening. Should I reset the editor settings or how can I resolve this matter?
I have a listbox with several list items added. I want that as user click on an item, I should be able to show its property. This should change for different items. For example (hypothetical) : Listbox has numbers 1 - 10. Now when I select 1 I should be able to set property - Name, Lastname, Colour, Age.
When I select 2 I should be able to set - Age, Hair Colour (clr shows), Weight, Date. When I select 3 then - City (combo box drop down), Country, Age only. This way value changes for diff items. One way is to put them in property grid and show them. Though this looks nice but adding/removing items in that is not easy. You need to have a class that refer that to prop grid. Do I have to code for each classes for all values in listbox or is there an easier way to manage items in property grid. If you think prop grid is not the right tool for such an activity then can you suggest something else.
I receive a System.Data.SqlClient.SqlException in the following code: Specifically Incorrect syntax near ' In order to evaluate an indexed property, the property must be qualified and the arguments must be explicitly supplied by the user. The exception detail in its entirety is shown below the code.
on a Windows Form, an object myObject is bound to myObjectDataBindingSource like this:myObjectDataBindingSource .DatSource = myObject on the form, i have a check box bound to the property: chkProp1 for example of the object: myObjectDataBindingSource In the code when the checkbox is clicked, I need to go in code and change another text property of the object txtProper2 for example like this:
Private Sub chkProp1_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles chkProp1.CheckedChanged
