Delegate Invoke "Parameter Count Mismatch" Error
Oct 25, 2009I'm running into a strange error and I can't move forward Consider the following code
View 1 RepliesI'm running into a strange error and I can't move forward Consider the following code
View 1 RepliesI have a DLL , written in VB.Net. This DLL has a below Function: Public Shared Function CreateApplication(ByVal aobj As Object) As Object When i Try to call this function by exe application with below routin i get "Parameters count mismach" Error. Public Function loadDllAndRunMethod(ByVal dllFilePath As String, ByVal className As String, ByVal methodName As String) As Object
[Code]....
Im trying to create a per user installation for my program made in vb.net I have .net 4 as a prerequisite which im going to download if its not installed The problem ive run into is admin rights is there a way to install the framework as an admin/elevated user then install my application as the current user so basically user launches bootstrapper -> pre-reqs run as admin -> application runs as current posibbly limted user.Im making the installer for my application using Wix (3.5), then im using dotNetInstaller to bootstrap and deal with the prerequisites.
If an admin installs application from the limited users profile he takes over the installation, which is what I dont want, but if the .net isnt installed the admin has to do this. The admin could install the pre-requesites then close the bootstrapper then the user could install the application but this doesn't seem like a great idea.
I get a parameter count mismatch when trying to invoke.
View 3 RepliesI'm trying to figure out if it is possible to instantiate and invoke a delegate by name, rather than explicitly. I think the code below explains it fairly well. I want to accept a function name and then instantiate the delegate based on that. In the example I use a select case, but I want to eliminate that and just use the methodName argument itself.
Private Delegate Sub myDelegate()
Private Sub myDelegate_Implementation1()
'Some code
End Sub
Private Sub myDelegate_Implementation2()
[Code] .....
I understand that .NET is multi-threaded and that is a good thing, but I continually run into issues when I have a background worker for example that is updating some control on my form and I have to do:[code] My question is why is this not built into the framework - surely if I am trying to update a DataGridView it should be intelligent enough to know when the update is from another thread and it could do all the above itself?
View 3 RepliesI'm working with the DevExpress XtraGrid control.I have a routine that goes thru and adds all the controls on the current form dynamically, and launches on a seperate thread the routine for a given control to initialize it to the value that will be displayed to the end-user. Some of the controls are displaying calculated values, and take some time to return their values, so that's why we are doing it on a seperate thread.
[Code]...
I'm using a similar snippet of code for any control properties that have to be updated, and all work fine. On the above code when the actual Invoke is called, it APPEARS that the thread just ends and never calls the delegate, and doesn't return to finish either.
I have some code in c#
BeginInvoke(new MethodInvoker( delegate() {myAppMethod_Tick(sender, e); }));
Now, When I tried to convert that code to vb.net I have below..
BeginInvoke(New MethodInvoker(Function() Do myAppMethod_Tick(sender, e) End Function))
But it does not compile.. What's problem for it?
Because my c# application works ok without any problem..
I have a few textbox for data display and RS232 communication in my application. After I send characters on RS232, I want text boxes display feedback characters from RS232 receive. So in SerialPort_DataReceived() i was told to use Invoke to display received characters on TextBox1, TexBox2.how to define delegate for TextBox1 and call Invoke()?
View 9 RepliesI'm hacking away at some code which seems to have been started, at least in theory, as an MVVM project in Expression Blend, by my predecessor at this company.
I've got a thread running in the background, which is running some operations on items as they happen. In order to prevent any clashes, I've also got that thread running any operations my users call for.
Once those operations are completed, I'd like to bring up a MessageBox to give a summary of the user-initiated operations, but now that they're running off in their own thread, the finishedProcessing event handler is now running on the background thread instead of the interface thread and it's causing my MessageBoxes to appear non-modally.
Back in the WinForms days, I'd have handled that using InvokeRequired, Invoke and a Delegate. I've read that this has been replaced by something called "Dispatcher", but the ViewModel class I'm using doesn't seem to have a Dispatcher object.
The "thisViewModel" class I'm using inherits a class called "WorkspaceViewModel", which inherits "ViewModelBase", both of which look generated to me...
where I can link up to this "Dispatcher" from here?
What is the Invoke syntax to marshall data from a background thread receive callback method to a function on the UI Thread?(Form1).
Public Class Form1
MyDelegate = New DisplayData(AddressOf DisplayData)
Private Sub Form1_Load()
MyDelegate = New DisplayData(AddressOf DisplayData)
[code]....
Code:
Public Class SendPings
Shared Sub New()
AddHandler Post.Saved, AddressOf Post_Saved[code].....
I get a error" Method 'Private Shared Sub Ping(item As BlogEngine.Core.IPublishable, itemUrl As System.Uri)' does not have a signature compatible with delegate 'Delegate Sub WaitCallback(state As Object)'.
i am receiving this error "ArgumentError: Error #1063: Argument count mismatch on flash.net::Socket/connect(). Expected 2, got 0.".I have created a .net tcp server that sends 1 byte of data while reading a file, now the flash client connects but i get this error and i don't receive any data at all.[code]
View 1 Repliesrecords with filter property gives the correct recordcount but it displays few records when bind to the mshflexgrid
View 1 RepliesI'd like to create a function myFunc with one parameter, which is a delegate. I should be able to call it with a delegate as parameter.E.g.[code]But how do I code myFunc, in other words, how do I enable myFunc to have it passed a delegate so that it can be called using myFunc(addressof test Func)?
View 4 RepliesI have a filesystewatcher object. On it`s event it runs a procedure which fills a treeview with a data. I had problems with treeview methods, but when I run them using invoke method everything is ok. But I still have one problem. When I load the form for the first time, everything works fine. But, when I then close the form (me.dispose, me.close), and load it once again, when Filesystemwathcer start the procedure i have an exception "invoke or begininvoke cannot be called on a control until the window handle has been created" trying to run a treeview.invoke method?
View 9 RepliesI'm trying to make this code with reflection since I want it to manage Technician and other types too.
[Code]....
I have a Dialog Box that creates a Link Label for each item in a list.When one of those LinkLabels is clicked the DialogBox raises a LinkClicked event.Before, I was using code like this in the Form that was instantiating the Dialog:[code]But I don't like that for several reasons.What I want to do, and what I thought would be straight forward, was to pass the AddressOf the UserClicked PoLink Method into the ShowClickableLinksDialog Constructor and do an AddHandler within the constructor and also assign the Delegate to a Property on the Dialog so as to RemoveHandler when the Dialog is Disposed.[code]But I get a squiggly on the tempLinkClickedEventHandler after the AddressOf Operator saying: "AddressOf operand must be the name of a method (without parenthesis)"I don't get it.I've played around with a number of permutations and can't get what I feel ought to work, to work.
View 3 RepliesI need to start a process, the process needs to be invoked in a certain format: url...here IECapt is the name of the process, first parameter is: url...Can anyone tell me why the code is not working and how to make it working?
View 11 RepliesD is a dictionary whose entry values are of Type T..What I'm attempting to do is have a delegate like "Serializer" below that I can invoke on an instance of T, such as "Entry.Value" below.Please see the "return Entry..." line below for my wishful thinking.[code]
View 2 RepliesI'm having problems with a program where I've got some multi threaded activities addressing the states of check boxes, which in turn are created by a user definable interface To achieve this I'm using the code below, which works on some occasions and crashes on other occasions when it stops with the following error NullReferenceException was unhandled Object reference not set to an instance of an object.Delegate Sub CBSetCallback(ByVal cb As CheckBox, ByVal value As Boolean)
Private Sub SetCheckBox(ByVal cb As CheckBox, ByVal state As Boolean)
If cb.InvokeRequired Then
Dim d As New CBSetCallback(AddressOf CBset)
Invoke(d, New Object() {cb, state})
[code].....
I've got the following code:
[code]...
The problem is that, when I call the "SetStatusBarText" sub from another thread, InvokeRequired is True (as it should be), but then my threads stall on the Me.Invoke statement - pausing execution shows them all just sitting there, not actually invoking anything.
from the documentation we have this: Multicast Delegate: Represents a multicast delegate; that is, a delegate that can have more than one element in its invocation list.
so am i right to say that Multicast delegate is no different from a normal delegate other than the fact that it has arguments. so System.Action is a 'normal' delegate whereas System.Action(T)(Byval obj as T) is a multicast delegate?
Following code doesnt work and raise error "A parameter is missing. [ Parameter ordinal = 1 ]".What s wrong with it?I am developing pocket pc application in vs 2008 and sqlce 3.5 sp1.
[code]....
I have tried repeatedly to use a For Each Next statement inExcel 2003. The intent of this is to ititerate through a predefined selection of cells and set the value of the cell 3 columns to the right based on the value of the cell in the selection.
The latest code I have tried to use is the following:
SR.Range("a5").Activate
SR.Range("a5", ActiveCell.End(xlDown)).Select
Selection.Offset(0, 5).Select
[code]....
Where SR is the active sheet. (I have only been introduced to VBA and code language for a few weeks, so I am learning as fast as I can. Please excuse my ignorance!)When I get to the 'If x.value' line I get the type mismatch error. I have tried to set my "each" to variant variable types and my "collection" (or selection as it were) to different variable types and constantly I am getting this same error regardless of my efforts.
I am searching for interger Id in a database using SELECT statement to search for the BranchId, I am passing this Interger Id to StrSQL which is defined as a string. I know that this is wrong but I do not know how best to do it.
[Code]...
I have a project in VB6, when I am executing this project locally it is working fine, when I am trying to execute it remotely it is giving the error like "RUN TIME ERROR 13, Type Mismatch"
View 9 Repliesdata type mismatch criteria error .. please help im getting this error .. and i don't know where's the error ..
Private Sub frmUpdateChapter_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
con.ConnectionString = "PROVIDER=Microsoft.Jet.OLEDB.4.0;Data Source = D:dbCAI.mdb"
con.Open()
[code]....
I had error when want to run my program It show me My coding is as below:
[Code]...
I have write one SQL UPDATE query. In that am running the form in VB.NET at the time of update the data am getting the below error.
[Code]...