Deployment - Can't Even Package
Jan 28, 2009
I am basically an EAI consultant and for my work I took an initiative to develop a windows based GUI whose functionality would be to simply execute a couple of Oracle SELECT queries and display the results in the form. I took the help of my friend who is a VB.NET expert and he was kind enough to develop the complete code for me within a day (He isn't available now). The application did work fine and we tried to package into an MSI using the Deployment & Packaging Project option. Now when I installed the application on a different computer, it throws OraOps10.dll not found ! I also tried the Setup Wizard from the same Deployment & Packaging Project option but it results in the same error.
Please note the following:
-> We used .NET 1.1 and the backend database is Oracle 10g.
-> We downloaded the Oracle Data Access components for .NET from Oracle's website. The DLL file in the error message actually came with this installation.
When I am packaging the solution, I expected all the dependencies including this OraOps10.dll should have also been packaged. What could go wrong here? I don't think I can request my customer to install the Oracle Data Access components for .NET, in this case we don't even need a packaging feature. I would be grateful to you guys if this silly issue is fixed very soon.
View 2 Replies
ADVERTISEMENT
Dec 10, 2010
how to package and deploy vb.net application.
View 1 Replies
Jan 8, 2010
What do you think is the best free setup and deployment package for VB.NET? Which is easiest to use?
View 4 Replies
Jun 3, 2009
I used vb.net 2008 express to build a database application i created database using access 2007 i created the application using vb.net 2008 express the application creates a report on word at run time my developing environement is
- windows xp
- .net framwork 3.5
- office 2007
- vb.net 2008 express
i want to create a package that could be used to install the application on the following environment
- windows xp
- .net framwork 2.0
- office xp - office 2007
I used the publish command of the build menu but the resulted package donot install , it produces and error informs me to install some assembles to th GAC!
View 1 Replies
Feb 12, 2012
best free setup and deployment package for VB.NET? Which is easiest to use?
View 2 Replies
Oct 8, 2008
I was just forced to switch from VB 6 to .Net. I have my program working but I can't figure out how to include the database that I'm writing to in the install package. I can get the program working by dropping it in but I have to deploy this to other locations and I'd like it to be easy for them.
View 39 Replies
Feb 16, 2012
I have added my own icon to my application's window title bars, but the Package & Deployment function uses the Visual Basic icom for entries in the Start Programs menu.
View 2 Replies
Jun 19, 2010
In VB6 when I finished an application I would use the package deployment wizard and it would include all the dll and ocx files in an exe. Is there a version of VS 2008 that does the same thing?
View 10 Replies
Feb 27, 2011
I take it that the 2010 Express version doesn't have a package & deployment, it only does CickOnce? That sucks because I don't like the way it installs. Does anybody know of a free package & deployment package?
View 2 Replies
Apr 9, 2009
I'm using v2008 Standard Edition deployment Setup1. In the Properties, it seems I have to declare the manufacturer and this results in a deployment path such as: "C:Program Files TOSHIBA MyAppFolder" when the setup CD I created is used. I really want C:Program FilesMyAppFolder as the path. I'd also like to put an icon on the desktop and create a folder in My Documents that can contain two txt files as part of the deployment. I'm stuck as to how to edit the package. Are these options possible?
View 11 Replies
Jul 30, 2010
Where to find the package and deployment tool in visual studio 2008
View 3 Replies
Dec 16, 2010
I am wanting to include data in my vb2008 deployment package.I have tried many different ways, but with no success.Even with the "click Once" method, also using the setup method.
View 5 Replies
Jan 14, 2010
In Vb6.0 i used to use package and deployment wizard for creating installation packages for my projects. Now I'm not getting to do the same in VB2008.
View 2 Replies
Jun 12, 2009
I completed an application in vb.net and i'm using sql server 2005 as database engine.Now I want to create a software package for this application.But the problem is that how can I include the database within this package,I'm also using a crystal report viewer.ie, How can I install this application to a system that doesn't have sql server?.
View 1 Replies
Jan 9, 2009
Hi, can anyone help me with a click once deployment query?I have packaged an application, using Click Once - it all works absolutely fine, with the exception of some files I need on the C: drive. For example: My application populates an Excel.xlt template with data, using an export function. The path of the template is c:program filesaem
eport.xlt
If the application is packaged, there is no option that I can see where you can include this template and the path to the file. The only way around it is to manually copy the template (and half a dozen other files in the same folder), after the click-once deployment - but this kind of defeats the object.
View 2 Replies
Apr 8, 2009
I have created a windows application which Installs Multiple MSI's based on some condition. The project is created in Visual Studio 2008 with .Net framework 3.5; If this application runs in a machine which has atleast Dot Net 2.0 installs, it works fine. but the system without framework 2.0 throws an error "The application failed to initialize properly (0xc0000135)"
How can I stop my application from crashing. I tried giving a check in the Main(), but it is not even firing the Main(); Is there any way I can give a prerequisite, But not in the Publish, Coz i am using the output exe and not the clickonce output..
View 1 Replies
Jun 6, 2009
Is it possible to create an uninstall option in the setup package?
View 1 Replies
Dec 31, 2009
I installed the latest version of Toad yesterday. When I restarted Visual Studio 2008, the project that is my installation package for my application would not longer load. The message I get in the output window is "The Visual Basic Deploy Deployment Package ({CCD045E8-6236-4B3D-B820-97F7DD14C77C}) did not load because of previous errors." When I try to reload that project, I get the following error: " The operation could not be completed. No such interface supported" I tried to repair the VS installation, but that originally failed. The Deployment folder under Common7Tools was currupted so I ran check disk. A few bad files and clusters were found and corrected and the second run of check disk ran clean. I uninstalled Visual Studio and then reinstalled it, but am still getting the same error. I tried reinstalling .Net 3.5 before the reinstall of VS as well. I tried creating a new installation project, but that failed as well.
View 1 Replies
Sep 14, 2010
found that Visual studio Basis not have a 'Package and Deployment' project type, andVisual studio professional Trial Edition is a temporary solution and also I remember that the license agreement says that Trail Editions
View 8 Replies
Sep 29, 2011
I've developed a database application in VB.Net 2010 Express and published a ClickOnce deployment package, the only choice in the Express version. The installation is supposed to create a listing on the Start menu but this isn't happening. Also, I'm using a specialized Hebrew font in the application that is not carrying over to the installation. what I'm doing wrong or if the ClickOnce publishing method is not capable of working in this way?
View 2 Replies
Jan 8, 2011
I do one project in visual basic 2010.In visual basic 6 project can be make Package and deployment (setup file or install file) file using Package and deployment wizard.But in visual basic 2010 express edition does not have Package and deployment wizard.how to make Package and deployment (setup file or install file) file in visual basic 2010 project?
View 4 Replies
Mar 24, 2010
I am trying to run the application created in the example at [URL] The code errors at the line dtsDataReader = dtsCommand.ExecuteReader(CommandBehavior.Default)
the error is A requested parameter does not exist in the package. I have checked everything that i can think of in the package Also when I try to run the package using the dtexecui utility I two errors "Error: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW.
[Code]...
View 1 Replies
Feb 26, 2011
I am wanting to use an application to package all my files together into a setup package. I have tried InstallShield 2011, but when i click on Visual Basic .net wizard, it tells me I do not have Visual Studio.NET installed on my system. I am currently using VB2010 Express How can I fix this... or is there a better application available for packaging?
View 2 Replies
Apr 14, 2011
I created a simple VB application in Visual Studio 2010.My computer, which I am using to create the program, is Windows 7 Pro, and SQL Server 2008 is running on a Windows Server 2008 Enterprise, which I have full access to.
I want to click a button and have an SSIS package execute.I looked around on the Internet and found examples, but they do not seem to work for me.I try to add a reference, Microsoft.SqlServer.ManagedDTS.dll, as a few sites advise, but it is not listed when I go to PROJECT>ADD REFERENCE.
I also type:
Imports Microsoft.SqlServer.Dts.Runtime but all I get is a squiggly green line, which when hovered over states "Namespace or type specified in the Imports 'Microsoft.SqlServer .Dts.Runtime' doesn't contain any public member or cannot be found." Below is some code I copied from one of the websites and pasted in my button click event (the path is correct), but a get blue squiggly lines under "Package" and "DTSExecResult":
Dim pkgLocation
As String
Dim pkg As
New Package[code]....
What can I do to make the SSIS package run when I click the button on the Windows application a created?
View 8 Replies
Feb 24, 2009
I am deploying sql express as a prerequisite. I have created a custom prerquisite using bootstrap manifest generator. The problem I have is replacing the template.ini file which exists in the sqlexpr32.exe cab file. Winrar and winzip allow me to open the sqlexpr32.exe but will not allow me to edit, add or replace the template.ini.I also cannot find the path where the sqlexpr32.exe extracts to as I want to use that path for the settings file eg "template.ini".[code]
View 1 Replies
Nov 3, 2009
i'm developing an application vb.net with mssql server as database. on my pc it works. but i don't know how to make it works on my customer's pc.anybody have some tutorial regarding the creation of a setup and deployment project with ms sql server.my first doubt is: how can i determinate the right connection string?
View 1 Replies
Jun 25, 2009
I have a windows app that uses the shape control which is part of the MS power pack and requires Microsoft.VisualBasic.PowerPacks.Vs.dll. I am using Publish to build my app and I have tried to change the dll to Include in the properties page but nothing seems to work.
I need a way to have the file included and I am unable to find a external copy and I understand that I cannot just copy the dll from my PC into the installation folder
View 1 Replies
May 7, 2012
Have built a project and associated it with a Setup&Deployment Project. The S&D project needs to contain 2 main folders (under User's Desktop) with various formats of files (xmls, txts, dlls) inside them and several subfolders. How can i copy/import these 2 folders and there sub-files/folders into my s&d project?
When adding them in the usual way, they are copied and defined a source path onto the current pc. You can understand what errors this might create when an another targeted pc does not contain those files to the exact location. Is there any way to copy them locally or somehow import them?
View 5 Replies
Feb 24, 2010
I have compiled my app to x86 so that it will run in a 64 bit processor, the issue I am facing right now is that when I install the app in under application folder I am not able to edit the config file which is in the same folder of the exe. how to give admin previlages to the application ?
PS: the app runs fine when installed in a different folder other than applicaitonfolder
View 3 Replies
Apr 16, 2010
I have a Visual Studio 2005 project. Formerly, all our PC's and servers were 32-bit but we have rearchitected everything and purchased new hardware and we are running 64-bit servers. Here is my scenario. I would like to convert my 2005 project to 2008, maybe that will solve all my problems, if you think so tell me and I will concentrate on that. But when I tried to convert the project via the Conversion Wizard, I got 102 compiler errors and I think there would be more but that was the max. So I gave in and just worked on it in VS2005 on a 32-bit machine. The solution consists of five projects, one is a web program, one is a windows service, one is a library and the other two are install programs - one for the web program, one for the windows service. I want to install the Windows Service on a test machine which is 64-bit. When I tried to run setup.exe on that machine, I got this error:MsiInstallProduct returned '1638'
View 2 Replies
