I have a simple class that I trying to populate from an XML document. The XML file has an attribute called TrackingID in the root node which I would like to get as a property. For some reason, when I deseralize the class, the TrackingID is null. Everything else populates fine. I have tried various attributes on the TrackingID property with no luck.
[Code]...
Basically, it refuses to find the node when the root node contains an attribute.
[code]...
When I do xml.SelectNodes("DataSet") with the xmlns in the root tag, it finds no nodes. If I remove the xmlns attribute, it works fine.How can I make it work while leaving the attribute?
[code]...Add an attribute to a root node?
View 3 RepliesI have valued pairs, attributes names and values in one hand, and I have an object with attributes. I need to set the values of those attributes. I need something like [code]
View 1 RepliesI had a strange problem editing a class in the property grid whereby the property grid would refresh incorrectly.I managed to reduce the problem down to a class with just two properties. I've included the code at the end to ease explanation.It basically boils down to a class with two properties. The first of which is expandable (a font)The class itself is expandable and also implements the CreateInstance method in the type converter.To see the problem, expand the font, edit, say 'Bold', and tab away. Two problems happen:
(1) The second property jumps up and ends up in the expanded font property.
(2) The '-' sign of the expanded font changes to a '+'.
The problem goes away by attaching ResfreshProperties(RefreshProperties.All) to the class. That's great, but I'd like to understand how it fixed the problem. I've had a look in reflector and can't find any examples of RefreshProperties being attached at the class level.
[code]...
I need a Class with Image Property, and then have a list of that class to populate a datagridview. Questions:
1. How do i define a property on a class thats an image?
2. Where do I store the image?
3. I need to populate the datagridview using: [Code]
For those of you interestested in mathematics you can find a root of a number in two different ways. Lets say you want to find the 5th root of 27.
[Code]...
I have this code to select first node of TreeView. But when page loads the by default root node is other than first, I want to set the selected node as top most by default. Here is my code in page load but it's not working:
Dim nodes As TreeNodeCollection = TreeView1.Nodes
If nodes.Count > 0 Then
' Select the root node
TreeView1.SelectedNode = nodes(0)
End If
This gives the blue underline error on this line:TreeView1.SelectedNode = nodes(0)
The error is: "Selected Node Property is read Only"
I am now trying to add A node(descendant) TO a Node
eg.
From this:
<World>
<Country Name = "South_Africa"/>
</World>
[Code]....
I Have a treeView Already populated (in vb.net) and would Like to move all the nodes or all the Tree for this matter, to a Root node that Contains it allI Have this:
Root1
---Water
---Dirt
[code].....
What node property tells you if the node in question in a TreeView is the Root Node (i.e. highest parent level)? I want to be able to test a node (True/False) in a node event procedure.
View 2 RepliesI have a listview which I am trying to remove the initial root node's indent. My problem seems to be that I can't even set the indent value of the treeview in it's properties lower than 19, and if I try something like:
TreeView2.Indent = 16
16 seems to be the lowest value that makes any visual change.
Using visual studio 2008
I am trying to get a root node to have the count of the childrens in its text. i.e. I have a root called Employees, I want it to say Employees (29)Help is appreciated. Heres what I tried
Private Sub TreeView1_DrawNode(ByVal sender As Object, ByVal e As DrawTreeNodeEventArgs) Handles Inv.DrawNode
If e.Node.Parent Is Nothing OrElse e.Node.Parent.Parent Is Nothing Then
[code]....
I got struck with a problem in VB.Net getting Xpath for an XML element as shown below:
<Parent xmlns:"http://www.sample.com">
<body>
<Child xmlns:"http://www.notsample.com">
[code]....
I need Xpath of the "element" in above XML using VB.Net NameSpace Manager For the "body" node i have done and its working but i couldnt do the same to "element":
dim bodynode as XMLNode=XML.SelectSingleNode(//ns:body,nsmngr)
where "nsmngr" is the namespacemanger created by me and "ns" is the name space of the "parent node" (which the "body" node inherits) added to the namespace manager as "ns"
I'm having problems deserializing some json data, getting InvalidCastExceptions and the like.
Can anyone point me in the right direction?
Here's the json i'm wanting to deserialize;
[{"OrderId":0,"Name":"Summary","MaxLen":"200"},{"OrderId":1,"Name":"Details","MaxLen":"0"}]
Here's my code;
[Code]...
I'm saving potentially very large amounts of data to disk as a single serialized class. But there is a sub class that I would like to be able to retrieve and write back to the disk without having to read the entire file or write back the entire file. Trust me, my reasons for doing this are good, and the design behind this is more than correct.In VB6 this is very easily done. A single statement gets the portion of the data you want from the front of the file and saves it straight to the Type it belongs to, flawlessly. Likewise, if the dimensions of the data haven't changed, but only the values, then Put can be used to save it right back to the file without disturbing the integrity of the entire file.When needed, the entire file is read into a larger structure, and the entire file is put back, but only when necessary. Most of the time the only information being read from and written to the file are in the first few hundred kilobytes of the file.
Now that I've got serialization working, I'm trying to use it to read (deserialize) only the first member of the class serialized to disk. I haven't been able to find any examples of this anywhere that have lead me toward making the sort of progress I'm hoping for.So I suppose the first question is this: Is it possible to read only part of a serialized class from the open file stream? Specifically, in one case I want to read the first two integers stored in the class. In another case I want to read only the first block (sub class) from the open file stream. In both cases I do not want to read the entire file, but just what I'm interested in starting from block 0. I don't need to write back the integers to the first file, but I do need to write back the block to the second.Assuming that the answer to the above is yes. My second question would then be: How is this done? I want to work with the file stream already open rather than opening and closing file streams over and over.I
I have created an xml file and i would like to now extract data from it.
Is there a function within vb.net that reads xml and takes out all the attributes with a certain name? For example to withdraw all the authors names from an xml file about books?
[code]...
I have an error on the statement "removechild".CurDoc.SelectSingleNode("/vendor").RemoveChild(n) how to remove nodes base on attribute, e.g. base on oid attribute from above xml.
i have got a object of attribute and i want to know what is its node name (who contain this attribut).
View 2 RepliesI am attempting to grab an attribute from an XML file and place it in a VB Class as a string. However when i try to run the program, I get a Null Reference Exception on line 21. why I'm getting this and not the placeID (line 2 on XML code)
Private Shared roomDoc As XmlDocument
Private Shared rooms As XmlNode
Private Shared roomList As XmlNodeList
[Code]....
how can I achieve an interactive map. The map consists of zoom in/out, panning and also the most important the node which could be clicked. What I'm gonna do with the node is I'll apply to it the Dijkstra's Shortest Algorithm.
I can't think of a solution to this, how can I do it. I'm not asking for codes.
Using the following code..
Try
sing MemStream As New IO.MemoryStream
[code]......
I have a Class CButtonCreate without get & set Methode. But i wanna use the Attribute "string newFileName" from the Class CButtonCreate in a other Class thats Class WriteToFile. How can use the Attribute newFileName in the Class WriteToFile?
class CButtonCreate
{
// Create a Folder && SubFolder from the tbProject
public void CreateFolder(string MyFolderName, string Mytbs, string MytbRevision, string MyTestSystem)
{
[code]....
So I'm just trying to understand why someone would want to use the shorthand property instantiation
Public Property CarModel As String <-- property
As opposed to
Public CarModel As String <-- variable
I'm trying to force an inherited class to use a custom attribute. I'm creating a class library where the user who wants to create an item will do so, but be forced to add an attribute (or visual studio will automatically add the default attribute) to their inherited class. Here is what I'm hoping to achieve:
BaseClass.vb:
<CustomAttribute(10)> _
Public Class BaseClass
End Class
MyClass.vb:
[Code]...
How can I shift the GET-implementation of a Class property to a / using a custom attribute? (I've added instantation vars (classname, propertyname) to the attribute, however I'd rather have these automatically fetched ofcourse.)
Public Class CustomClass
<CustomAttributeClass(ClassName:="CustomClass", PropertyName = "SomeProperty")> _
Public Property SomeProperty() as String
Get() as String
[code]....
i wrote a custom attribute and got the following Color property that I want the user to be able to indicate the color property in the attribute on a class:
Private _ColumnColor As System.Drawing.Color
Public Property ColumnColor() As System.Drawing.Color
Get
[Code]....
[Code]...
Why is the first line not correct? What it wants is a System.Type and a System.String but refuses to work.
I have a class created for use with the PropertyGrid control in a VB.Net application. One of the properties of the class is:
Private _someProp As String
<Browsable(True), _
BindableAttribute(False), _
[code].....
I think know how to do this in C# but I'm having syntax trouble in VB.NET because I need to take advantage of the 'handles' event stuff. I have different events that I somehow (probably delegate) need stored in a property of an attribute (I just add an attribute to a property linking to the corresponding event).
E.g.
<BindEvent(EventThing)>_
Public ReadOnly Property IsTrue() As Boolean
Get
Return True
End Get
End Property
They need to be events so that other programmers can use the VB.NET handles keyword on methods.
Public Delegate Sub TestEvent(ByVal sender As Object, ByVal e As Object)
Public Event E As TestEvent
Public Sub Test() Handles E
End Sub
These properties are already raising a general event, which I am catching, determining the related property and thus getting the related attribute (and delegate/event). I want to then raise the event that's related. If I just use a delegate tied to the particular event that won't raise other handlers will it? I also want to avoid having to write a sub for each property that just uses Raise Event on the event type if possible as this seems redundant.
E.g. avoid:
Public Event E As TestEvent
Public Sub CallE(ByVal sender As Object, ByVal e As Object)
RaiseEvent E(sender, e)
End Sub
[Code] .....