Does Microsoft Access Allow Multiple Checkbox Selection?
May 22, 2009
where I want to use the Select All and Deselect All CheckBox. There is no Visual Studio installed there. They want everything in Access. Visual Basic is not installed, it is within the Access interface. Is there a way I can use VB code to have a Select All and Deselect All option. I dont want any code. Just want to know if it is possib
I have multiple documents stored in Attachment data type in Access database. UsingDataReader, I need to read multiple attachments along with their file name and store them on the file system
When I exit the programme and start it again the checkbox selection from the previously job gets lost. After starting there is not a problem until I exit and start the programme again.
I'm currently doing a project that includes access 2010 My question will be what driver can I use for an access 2010 *.accdb type file? For a *.mdb it works perfectly well with
ERROR[HY000][Microsoft][ODBC Microsoft Access Driver]Could not find file '(unknown)'. ERROR[IM006][Microsoft][ODBC Driver Manager]SQLSetConnetAttr failed ERROR[HY000][Microsoft][ODBC Microsoft Access Driver]Could not find file '(unknown)'
And then it shows me that my code for
If dsLogin.Tables(0).Rows.Count = 1 Then IndexOutOfRangeException was unhandled Cannot find table 0
I knew it must be the driver but I don't know what accdb driver I can use for the connstring.
I have an error ERROR [22018] [Microsoft][ODBC Microsoft Access Driver] Data type mismatch in criteria expression. and I've been trying to solve this but unfortunately I couldn't get the hack of this error. I'm a newbie in dotNet.
Public Sub LogInContinue(ByVal senter As Object, ByVal e As EventArgs) Dim LibDS As DataSet = New DataSet Dim LibDA As OdbcDataAdapter = New OdbcDataAdapter("SELECT * FROM tblUserAccount WHERE Uname='" & txtUserName.Text & "'", LibConn)
I'm trying to set my software up so that you could invert the selection if needed.
This is the code I have so far:
Private Sub InvertSelectionToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles InvertSelectionToolStripMenuItem.Click If Me.chk_7zip.Checked = True Then
[Code]....
I already figured out how to Select all and Select none and it seems to know that when I want to invert the selection if there is no checkmark in the checkbox that it should check it but if I hit it again or if was selected previously it won't uncheck it..
I have a datagrid that has a checkbox column and it all works fine and dandy except I'm not sure what the proper way to handle this situation is. When I check one or more checkboxes then loop through to find which ones were checked if I didnt move the selected cell before clicking go it will not detect the last checkbox checked. However if I change selection it does. Problem is I dont want to change selection, I tried unsBelow is the code I'm using to find which checkbox is checked. This will msgbox me the text in the second column of all the rows checked except the last one I checked
i would be glad if someone would give me sugerencies of what could be a good way to represent a Checkbox List on my report. Actually im using RDLC+Microsoft ReportViewer. the solution im evaluating at this moment its to just thread them as images just capturing the checkbox list Hdc and then exportingto the report but the bad thing its that users wont be able to select stuff there and also the .PDFs im planing to create gonna be kinda heavy.
i would emulate the checkbox list with labels, but its that this project has soooo many checkboxes that its not really a good idea to make it in that way.
I am pulling information out of my Access Database and reading to a webpage. I need to add a update, delete, and email function to this page. I am trying to do this with the selection of a check box and buttons for each one. But I am unable to get the delete to do anything but redirect back to the orignal page. For the update I want to be able to pull the info in text boxes and just change the info and click update and it gets changed. I also want to be able to pull their email from the database and put it into a text box to be able to email right from the page. Code for show page and delete page below.
I added: import microsoft.office.interop.excel and I suddenly got this error:" 'checkedchanged'is not an event of 'microsoft.office.interop.excel.checkbox'"
for each cb2 as checkbox in thechecks addhandler cb2.checkedchanged,addressof checkpress next
it erroreed on the cb2.checkedchanged part and this code has worked before. however once I add the import it errors. what namespace am I supposed to put it under?
I have vb .net windows form application that I want to connect to Microsoft access database using "Microsoft DAO 3.6 object library". My problem is that when I go to Project tab -> Add reference -> COM tab, there should have been "Microsoft DAO 3.6 Object Library" on the list, but for some reason It's not on the list. Then I googled, and found out that the location of "DAO360.DLL" is "Program FilesCommon FilesMicrosoft SharedDAO". After clicking on Browse tab, I browsed to that location, and I guess I added reference on another way.This is the code that I used before for connecting to Access, but for some reason It doesn't work this way on this PC.
I coded a program to access a Microsoft Access 2010 database. The program is written using Microsoft Visual Studio 2010. I get the error message that the database I'm trying to access is in an invalid format. look at the code below to see what I missed. The error is in the datasource statement.
I'm new to VB.NET and looking for some help with combo boxes. I was wondering if it is possible to link 2 combo boxes to each other based on user selection? [code]If the user selects Dept Name "Bakery" from the first combo box the second combo box should fill with the appropriate Section Name i.e. "Bread", "Cakes" etc.I am using VS2008 and the DB is SQL Server 2008. Both combo boxes are currently bound to the above Tables and displaying all Dept and Section Names.
I am currently using the code below within a VB.Net application to find specific text in a Word document. The text is surrounded by symbols represented by the character codes in the .Text statement. The code below is working fine. The issue now is that sometimes the desired text within a document has been marked for deletion and appears as tracked change within the document. I would like to find only the desired text that has NOT been marked for deletion. Does anyone know of a way to determine if the found text is a deletion?
this is the wrong forum because I am quite new to this :S and I am actually unsure what this fits under. I am using Visual Studio 2008 windows form in .vb so I am taking a guess at it being Visual Basic 6.0Well the question is this. On a form I have 3 Datagrids. The first one shows information about a case including client name and ID. The second shows a table that contains all the jobs registered to the company by the clients. lient can have up to 8 Jobs. The third is a list of all case numbers that clients have
I have a datatable loaded from a database. I bind the datatable to a gridview on page_load. Now I want to filter the gridview by a user selection so I made a checkboxlist and wrote some code as follow at CheckBoxList1_SelectedIndexChanged
[Code]...
With this code above, it can filter if there is only one selection on the checkboxlist. I try to loop the checkboxlist myself but always ended up in errors. Hope someone can help me out to make this work.
I need to update a link Table with the data I select from multiple grids, the problem is only the last command statement takes effect, therefore I am only updating the link table from the last command statement, is there a way to update the link table with all the command statements?
Dim ConnectionString As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=|DataDirectory|aop29.mdb" Dim objConnection As New OleDb.OleDbConnection(ConnectionString)
I am enrolled in a college course using Visual Basic 2010 Express.My current assignment calls for the following:Create a small program that allows a user to enter the total amount of purchases for the purpose of calculating rewards points based on the purchase totals vs. their membership level of basic, standard and premium.The user selects their membership level via 3 radio buttons, basic, standard or premium.
The total of purchases and their rewards points depend on the membership level. Example, if you are a basic customer and your total purchase is under $75, you receive 5% in rewards points (70 x 0.95). Additionally, if the total is between $75 and $149.99, you receive 7.5% rewards.Here is what I have so far, but I am getting errors on the ElseIf statements:
If basicRadioButton.Checked = True And totalTextBox.Text < 75 Then rewards = total * 0.95 ElseIf basicRadioButton.Checked = True And totalTextBox.Text > 74 AndAlso totalTextBox.Text < 149.99 then rewards = total * 0.925 ElseIf basicRadioButton.Checked = True And totalTextBox.Text > 150 Then rewards = total * 0.9
So I have a datagridview being populated with data from a database.At this point a user may or may not selected (via mouse click / key press) one or more rows within the datagridview.I need to (upon selection) create a new dataset, datatable and add rows with the some data from the said datagridview.
For example, if a table had nothing but names, e.g.
Joe Sean Larry Chris
Upon the user clicking, dragging a selection over Sean and Larry to add those names to a new dataset so I can pass it to another method for further processing.
[Code]...
Input array is longer than the number of columns in this table.It looks like I'm either missing a column declaration or adding the table to the set?
I know that title is kinda miss leading, but i couldnt figure out another way to explain it. I know theres a way, but I dont know how to do it.Ive got a Save code that I have about 5 differnet times in my application. How do I make it so that I can just type in something like Do Save, and it locates the save code and follows it through, then returns to where it was.
I have a listbox that allows a user to have multiple selection and a button to transfer these selected items to another listbox, now theres a new requirement which I also need to indicate the quantity for each respective items. I currently have a Source items select box and a Selected items select box. how to go about designing this feature?
Multiple select box selected Quantity E.g. Eggs ---> Eggs ---> X 4 Vegetables Potato X 5 Potato
A couple of questions about the FolderBrowserDialog in VB .NET Express 2005... 1. How can I make it so this control allows selection of multiple folders at a time? 2. It remembers the folder I selected last time (in the same session), and highlights that folder, which is good, but that selected folder appears near the bottom of the window. Is there a way to make it so the previously selected folder appears in the middle of the window (i.e. the scroll bar is further down the window)? See screen shot attached for how it currently looks when the window opens.
I have a little problem with a little VB.NET application that I am building. This is a winforms applications not WPF.I have a checkedlistbox with a few items and I want to allow user to select more than one using arrows keys or mouse clicks combined with shift and ctrl keys so I set selectionMode property to multiExtended. In design time it is not possible I get an error: It says value property is not valid.and if I set it in runtime by doing:
I have a secondForm that determines whether a checkbox.checked = true/false and I want the firstForm to verify whether the secondForms checkbox.checked = true/false in a function
I would like to know how to select multiple records from a gridview, (ie checkboxes in itemtemplate) and process SQL statements on the records. So in short, its basically selecting records from a grid view by ticking the check boxes, and clicking a process button which then proceeds to execute the SQL statements corresponding to the records selected.[URL]..