I am building an application that has a few elements to it but one of the first elements is that when a user selects a date, they have to hit a button in a message box that confirms the date that they selected and then it enables another button. The code is written as such:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles startDateButton.Click
Dim buttondialogresult As String
Dim confirmbox As DialogResult
[code]....
But when I select ok from the Windows.Forms.DialogResult.Ok, it is not enablind the exceptionsButton.
I have made a program on Visual Basic 2008. I have put textbox1 and button1 ONLY.I have disabled button1. I want button1 only to be enabled when we type some numbers in textbox1. I also want that we can ONLY type numbers in textbox1, not letters or other symbols.
I have 4 forms. I have a button on form2 that when pressed, I want it to enable a button on form1. What I've tried is this: Code: Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click Form1.Button3.Enabled End Sub But its telling me that the property access must assign to the property or use it's value.
I want to make a form that makes a button when loaded. How can I make this button work (meaning that something happens when button is clicked)?[code]...
I have a form with a FileListBox and 2 Button:... Button1 I would like To Undo my Last Action:...Button2 I would like to redo the Action, I have Been Looking For a code for These Buttons. In FileListBox I am Drilling Down through my files. So that Means if I double click on a file in FileListBox and I have gone to far I want the Undo Button (Button1) to show Previous Files that where shown).
I'm making a timer. To start the timer the user must hold down a button for a certain period of time (0.7 seconds) then the timer will start. I'm having trouble making a code so that the timer starts only when the user hold the button for 0.7 seconds.
Can I perform an action when the X (CLOSE BUTTON) will be press?ex.If he pressed the X button then a msgbox will prompt and will verify his action of closing the application.
I have been developing my application for a while and need some advice on the closing. I want a code to be run when the close button is clicked but ONLY when it is clicked.
I have dried the form.disposed but that fires whenever the form is closed from the code. I just want it to do it when the close button is clicked.If you don't understand it I will give an example. I have a registation form that is the first thing a user who has not used the app before can see. When they click the close button I want the application to exit through Application.Exit(), however when they have registered the form is closed from the code through
formlogin.show()Me.close()However the Me.closE() triggers the form.disposed event and thus the application exits completely which I don't want. I know I can use the form.hide() but that keeps it running which makes the app more resource intensive.
I am currently trying to create a log in form that requires a user to click buttons in a specific sequence (other than the traditional username/login format) in order to open another form. I am new to Visual Basic 2008.
i can make a button appear in the DataGridView, but i want to be able to load a form when i click on the button, how do i do that? I cant double click on the button to load the code because it will only appear when i run the application
The following code is to display the button objButtonColumn = New DataGridViewButtonColumn objButtonColumn.HeaderText = "Edit" objButtonColumn.Name = "EditColumn"
Im wondering how can i execute this code properly.. it seems i need to click the tabpage twice before my 'Save_Set_' button will take prompt or action..
Private Sub TabPage1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TabPage1.Click teleport_controller = 1 '<--- declared as integer End Sub[code]....
tabpage1 and tabpage2 are under in tabcontrol1 control.. the problem here is when i select to this tabpages my save_set button doesnt execute for the code.. but if i click the tabpage again its working... i dont like this kind of action at all..
I want to make an button that runs an action with the frequency from an number input in Visual Basic .NET . How do I do it? Could someone point me out the syntax of such an action?and all that I want to do is use an number from "NumericUpDown" to give a button how many times the action the button has to do it.
i have a button and if a specific option is set (via a checkbox) then once every 5 times the button is clicked an extra event happens.I thought a counter/Integer would be the way to do it but i cant seem to get it quite right, heres my code i have in the buttonclick event:
a datacontext defined in a module(domain services ado.net ria)a page having add/delete methods whenever any method is executed, it is found that all the previous actions (NEW RECORD ADDITION and DELETION OF RECORDS) are carried out before the new action is carried out normally
this behaviour is not prominent but "when using break points and inspecting the values of the variables and table object to be added to context, it is clear that all the previous actions take place again. even when the datacotext. savechanges is called, even after that still all actions carried out on the datacontext repeat themseleves, when any new action is to be carried out
I have a web page that I need to log in, the first page is not a problem I can log in as it only has the company name to enter, but from here is where I have problems, as when the first page is done, I am directed to a second page with two fields that has to be filled, filename and author, then depending on the action you have to click on in button,out,button delay button, here is where I need help, how do I fill the second page fields and how to chose the right button depending the action to take.
Is it possible to embed a "Button" or link in text/Rtf that is inside a Richtextbox? Example: I have a richtextbox with three Contacts in it. Is there a way that when a user clicks (or touches with mouse) one of the three Contacts that I can run something or open another form, etc etc...
My RTB (populated from a Database) _________________________________ Joe Smith 123 Way St Somewhere, NV 39309
i am writing a program (D&D simulation) and wish to know how to assign an action to the "X" button that normally closes every window and is located at the top write of every window. i am at a point where i need to find a way to load a specific window when then the user closes a certain window...currently the game is stuck. i wish to place an if then else loop inside the action so that i may direct the game to a certain area should the window be closed by the user
So how does one turn SSL on in System.Net.Sockets.TcpClient with VB.NET code?
Turning it on in System.Net.Mail.SmtpClient is easy, you set the .EnableSsl property. I cannot find a corresponding property in TcpClient. It's probably buried somewhere.
We have an application that is installed and runs just fine on Vista. Our users are requiring a change to our application in order to change the system time on their PC. The code to change the time is as follows:
Private Sub UpdatePCDate() Dim _ServerTime As Date = GetServerDate() Dim _offset As Integer = TimeZone.CurrentTimeZone.GetUtcOffset(_ServerTime).Hours
[Code].....
When this code executes, it bombs because of UAC. How can we modify our program to display the message similar to when they try to change the system time via the Control Panel. That is, it warns them that something is about to happen that requires their permission.
I am creating a USB "cookie dispenser" (long story) and I plan on programming it by, when cookie.exe starts, it disables the port, you plug the USB in and press a button and it enables the port (thus powering the device). What I need to know is, is this at all possible? And if so, can you help me get it to work? I know I should put in an effort but it's late for me (UK) and I want to post this overnight so that you guys (in the USA may
I am enrolled in a class in Visual Basic 2008. I wanted to drop the class, but it is too late. Now, I am stuck with this project that the professor assigned and it's due this Thursday. Anyway, how do I do this: The credit card number TextBox control is dynamically enabled/disabled depending on the choice of payment type? And did I do the newOrderButton correctly (see code below)? This is also the clear button. And is there a way to do a reset Form? Sorry for that many questions. I am really lost right now because there is a lot to do in this project and I don't even have a clue of how I am going to finish this project.
Private Sub newOrderButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles newOrderButton.Click ' clears all the information that is displayed and start over
I have a program and I need the Submit time button to be disabled after I enter 5 numbers and then the Get Payment button needs to be enabled. I have been playing around for several hours but cannot figure out how to do it.[code]
I attached a picture of how my project should look and what the labels are. There are a total of 12 books and 4 different age groups. In each age group there are 3 books. There is also a previous and next books button which will show the next book in that age group. I want to make it so that previous button is disabled when it is on the first book of each age group and so that the next book button is disabled when it is at the last book. The only issue that I am having is that after the button is disabled it is not enabled again after. Here is my full code for this part as of now. As you can see I made it so that everytime I click on a new age group the previous button is disabled initially.
I took some unnecessary code out of here because I don't want anyone from my class finding this and coping all of my work.
Public Class BookInfoForm ' use this array to display information in this form Private books(,) As BookInfo = getBooks()
