The following error is reported on attempting to update a record "Error parsing Update Query [Token line number = 1, Token line ofset = 38, Token in error = / ]". There is no "/" in the query. Here is the code:
This is the button Save code:
Private
Sub btnSave_Click(ByVal
[code]....
The Form Designer in the IDE is no longer working properly. When I create a new project, the Form Designer will work, but after I save it and close the IDE and reopen the next day the Form Designer no longer shows the form and instead says "To prevent possible data loss before loading the designer, the following errors must be resolved: An Error occurred while parsing EntityName.Line 2, position 62" If I click ignore and continue, then it just displays a blank form with no controls. The problem appears to have started after I unistalled and reinstalled VB2008 Express.
View 2 RepliesI've been running into some errors with converting strings to dates in the following code. I have recently added the intcall.Value = DateTime.Parse(txtIntCallDate.Text) function which had gotten rid of the error message, however the records are not being updated, any of them on the form. Prior to this the strings were being updated just fine. As long as there is a date entered on the form there is no error, if it's left blank i get the "Problem converting string to datetime"
[Code]...
In a perfect world my xml feed source would produce perfect xml ..that is not the caseam parsing an XML feed that sometimes has ampersands and dashes in the content that messes up my parsing.I've tried doing pre processing with find/replace to get rid of these characters but then I get another type of error
View 1 RepliesI am working on VB.Net project. All was well until I started getting the following error while trying to view Forms ...
The error says : "An error occurred while parsing EntityName: Line 4 Position 42"
All code is fine not logical problems..but the came suddenly and this error in all the forms...Projects runs perfectly but I am not able to see Forms Designer...
I am using NiceEdit to format text in text areas, it displays a toolbar over the specified text area, I created a test page, its working, I Response.Write the content of the text area after being formatted, and its okay, I created a break point to see whats being read, it was all fine.Now I moved to the real page where I should implement this text formatting, it simply did not do anything, the toolbar is shown and its working, but when I submit, nothing is being stored, i created a break point and the content of that text area was nothing, empty "".I went further and put Response.Write(textArea.text) then Response.End() and I got the error:XML Parsing Error: no element foundJust in case, the script I am using for the formatting NiceEdit toolbar, and this is the same script i used in my test page and worked just fine, the script is:
<script src="../nicEdit/nicEdit.js" type="text/javascript"></script>
<script type="text/javascript">
bkLib.onDomLoaded(function() {
[code]....
I'm trying to add records from a CSV file into a dataTable in vb.net, as follows:
dim myObjAdapter as new myDataSourceAdapters.myTableAdapter
dim myObjTable as new myDataSource.myTable
myObjTable = myObjAdapter.Getdata
[Code]....
PS: in CSV file, the decimal digit is "." and if I add directly a record into table, using "." as decimal separators, the numbers get right format.
There is a kind of settings to change, or option to enable/disable on adding this records to do the right adding?
The file 'C:Documents and SettingsMirkoMy DocumentsVisual Studio2008ProjectsWindowsApplication1WindowsApplication1Form1.vb' does not support code parsing or generation because it is not contained within a project that supports code.
Instances of this error (1)
1. Hide Call Stack
at
[code].....
I would like to be able to parse vb.net code files, so I can examine the collection of Subs, Functions (and their contents, including comments), private variables, etc. I can be open the actual source code files. So for example, if I have:
[Code]....
update statement, i am trying to update a row within a access 2007 database here is my code.
[Code]...
login.aspx generates the following error on load, this file worked great for over 2 years, problems with Godaddy forced us to create a new account IIS6 ASP 1.1 which matched the original hosting environment. However now after the migration this file generates this error. Any Ideas why this parsing error is generated?
Parser Error:
Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not load type 'HopeCounselingWeb.login'.
Source Error: [Code]
I have an issue with a data base updating it won't update for me in debgging mode it is stopping here on this bit of code which is highlighted in red. the error which comes up is .(update requires a valid update command when passed datarow collection with modified rows.)
Public Sub UpdateDataSource(ByVal ChangedRows As database.dataset1)
Try
'The data source only needs to be updated if there are changes pending.
If (Not (ChangedRows) Is Nothing) Then
[CODE]...
What is wrong with this code. It does not update the access database and no error.
Dim conn As New OleDbConnection
Dim sqlQRY As String = "SELECT * FROM StdMaster WHERE StuNo = " & txtStudentNo.Text & " ORDER BY StuNo"
[CODE]...
I'm creating a vb.net winforms application that will take in user given strings, parse them, and print out labels with variable information. The given string will be used in all the labels, but the variable part of the string will change with each label.
My question is: is it better to parse the strings one time, then store those values in arrays, or to parse the string each time a label is printed? Which will perform better? Which is better practice? What is the proper way to test something like this?
I am completly flummoxed!!! I have writen code for updating my table from a form but when I use the same code only changing the table names it wont work I get the following message: "Update requires a valid Update Command when passed DataRow collection with modified rows" My codes are as follows:
[Code]...
when trying to use the update command for my table adapter, i get the following error.
[Code]...
i've used the same commands several times and even tried copying the code from another project and importing that table and still get the same error. am i missing a namespace or class or something?
below coding for the 'Length' error...
Public Sub ProcessFTAlchemyFiles(ByVal PathPlusfilename As String)
Dim ParserFile As String
Dim Sections() As String
Dim StationType As String
Dim ts As StreamReader
[Code]....
the error i get while executing the code below in OleDb
Try
con.Open()
Dim cmd As New OleDbCommand("Select * from customer", con)
cmd.CommandText = " update customer set hr =@hr,min =@min "
cmd.Parameters.AddWithValue("@hr", ComboBoxHr.SelectedIndex.ToString())
cmd.Parameters.AddWithValue("@min", ComboBoxMin.SelectedIndex.ToString())
cmd.ExecuteNonQuery()
[Code]...
I am getting the below stated error in javascript. This error occurs when i try to cal update panel on button click Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled.Details: Error parsing near 'Panel|UpdatePanel1| <div id="up'.
Here is the UpdatePanel code:
[Code]...
I am not able to understand why this error is coming? Can anyone help me sort out this issue?
I'm writing an application to update a database with student records. I've used this particular code before, but with just a single column, but i added multiple columns to this one. when i call the sub to save the records it gives me this exception:syntax error in INSERT INTO statement at line 41
View 2 Repliesim new with vb .net and im currently developing a simple information system for an agency .. im almost done with it but there seem to be a problem with my update statement for the change password code here's my code..,[code]
View 2 RepliesContinuing on from my adding data to the db I am using the following to try and update the db[code].....I get error while updating record on table...Incorrect syntax near ','? I can't see where it is getting this from? the the dropdownlist.text ="RC1
View 2 RepliesI dont know where's my error.To begin with i have two buttons ADD and SAVE.My Datebase Name is COURSE where all its fields are text except courseid (number).when i click SAVE the only error is FAILED to convert parameter value from a string to Int32 exactly during dataadapter.update (ds,course)I am not converting any datatype or value to int32 .
Private Sub BUTTONSAVE_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BUTTONSAVE.Click
MsgBox(" SAVING CHANGES....")
Me.Cursor = Cursors.WaitCursor
[code]....
I'm sure this question will be easy for you lot.I'm simply trying to update an existing record in my database using the following: Private Sub Button12_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button12.Click
[Code]...
I'm trying to save a decimal number (like 7.28 ect) on Database.Database field type is float.Note that in Italy decimal separator is < , >
Dim Credito_Aggiornato As Single = Convert.ToSingle(FormatNumber(Credito_Residuo - ((Numero_SMS_INVIATI_per_calcolo_credito
* Costo_Singolo_SMS) / 100), 2))
[code].....
I am not really sure where my syntax error is. I have gone over it several times and it appears everything is right and I dont think I am using any reserved words.x is TEXT in access for now even fields that would normally be numbers.
Con.Open()
Dim cmd2 As New OleDb.OleDbCommand("UPDATE Customer SET MemName=@a0, StreetName=@a1, Gang=@a2, RoleInGang=@a3, SSNum=@a4, AKA=@a5," _
[code].....
I am coming up with a syntax error in regards to the UPDATE command in "Private Sub btnEdit_Click." I've gone through it several times but can't see it![code]....
View 14 Repliesi'am trying to update a row in a table using : command.ExecuteNoQuery() it's not giving me an error but it's not updating the row This is my code :
[Code]...
Im learning to use a gridview and a problem that im seeing is that putting an edit command in the gridview so that I can update a particular row. When I click the edit, it turns to the update as expected, I hit the update and the particular field turns the row into editable textboxes which is expected. The problem that I notice is that if I click another row, I get this error:
[Code]....
I have been working on a project for awhile now and have gotten to a point where I cannot update the database after changing it. below is a sample of my code incase anyone can see where I have gone wrong.I have declared the database connection in another part of the program.
[Code]...