In the pseudo code below, if I have two classes and I want one class to be initialized in the other class without the name having to be different, how would I accomplish this?
'==Car.vb==
Public Class Car
Public Model as New Car.Model()
[Code]...
Is there a better way of doing this so I get the result I want for my usage code?
'==ASPX page==
Dim c as New Car()
c.Model = Car.Model.Types.BMW
I have a class that gets 2 label controls passed to it byRef. So, while my class is being executed I want the labels on the form to be updated. This works Most of the time, but sometimes it seems the form stops updating till the class has finished its process...below is some of the code that I am using to do this...
Public Class clsImportWWDB
Implements IDisposable
Private strSearchTag As String = "" 'Last Tagname of value scanned
Private intMeldsFound As Int32 = 0 'Number of Alarm Messages Found
Private _MyForm As Windows.Forms.Form
Private _FileName As String
[Code] .....
I have a supporting GridColumn Class that resides in the same class library project as my GridBox usercontrol.It is used in a list of GridColumns as a property.[code]In the Load event of my form I would like to use the .Add method of the List(Of GridColumn) to add columns to the usercontrol.[code]It will not work though because it cannot find the GridColumn class.If I use: "Imports <My Class Library Name>" it works, but I would like it to work without having to do so.Standard controls do this all the time.Am I putting the supporting class in the wrong place?Is there a modifier I that will expose the class when the usercontrol is dropped on a form?As a work around I created a method that adds a column but I would like to know in any case.
View 9 RepliesI have a WCF Service exposing a single contract and operation:
<ServiceContract(Namespace:="ImageSystem")> _
Public Interface IUploadService
<OperationContract()> _
[Code].....
This subsequently leads to stream casting issues, because the generated function allows me to pass a memory stream as an input (which works correctly when passed through to the service), but instead of passing me back a new stream for the response, it attempts to cast the MessageBodyStream received from the service into my memory stream.
This is, in some ways similar to other posts but as you can see, there are no enums involved in my contracts - presence of Enums caused strange proxy class generation is marked as the answer in the similar post.
Is there anywhere I configure the proxy behaviour to use the contracts I've specified? Clearly I'm within a dev/test environment currently, but when this eventually goes to production it will be memory and file streams passed to the service, and the returned stream can be in any format to be honest, I intend to treat it as the abstract stream class. The only way round this I can see right now is to change my in stream to be the same as the anticipated out stream, but surely there is a better way?
In the code below, the namespace is called "Navigation" which I think is correct. Then I have a class called "Heading", which by definition is the direction a person/vehicle is truly pointing towards. I think that is also named correctly. In the code below, I have four things I have named:
_WhatToName1, WhatToName2, WhatToName3, and WhatToName4.
The value that gets passed in and stored is a double between 0 and 360 -- essentially the degree value from a circle. For WhatToName3 and WhatToName4, I have seen a lot of places that just use "value" as the name. Is that standard?
Namespace Navigation
Public Class Heading
Private _WhatToName1 As Double
Public Sub New(ByVal WhatToName3 As Double)
Me.WhatToName2 = WhatToName3
[Code] .....
I'm relatively new to .NET and am wondering how people handle naming their private variables and the public properties that access them. Like if you want to be able to just read it, but not write to it.
[Code]...
So far I've taken to putting a 'l' (for local) in front of the all the private variables so as to be able to use the full name for the property. Is there a better way around this, or do you just always have to have different names for private variable/public properties? If so, what sort of conventions do people use?
Its not a huge deal, its just a minor annoyance and I was wondering if I was missing something.
In the past when I have written classes and constructors, I named the variables in the constructor parameter something different than what would have been stored in the actual class itself.What I do now is name them the same, and reference the internal variables with Me.varname.Here is a class I just started building.Is my naming convention incorrect? [code]
View 1 Replies[code].....
View 1 RepliesI have a little banking console app for a class project. I've created a class (Account). What I want to do is name the instance of the class based on text input:
Dim strFoo As String
strFoo = Console.Readline
Dim strFoo as New Account
Obviously this won't work because strFoo is a String.
If Class X is within the scope of Class Y, is X a subclass of Y?If Class A is a sub Class of B, then is Class B considered a super class of A?if Class C inherits Class D is Class D a superclass or parent of Class C?if Class E extends Class F then we can consider Class E a child of F?if Class G inherits Class H and is within the scope of Class I then who is the parent of Class G? Classes that inherits Class J and classes that are within Class J are all sub classes of Class J?
View 1 RepliesI have put this code in the global form Inherits System.Windows.Forms.Form. And then in the form that will inherit this from the global Inherits MenuStrip. "MenuStrip" is what the global form is called. But keep getting this error: Error1Base class 'MenuStrip' specified for class 'Lesson2' cannot be different from the base class 'System.Windows.Forms.Form' of one of its other partial types.
View 5 RepliesI have a class (see below)
Imports Microsoft.VisualBasic
Imports System.Data.SqlClient
Public Class ClientProfile
#Region "Variables"
[CODE]...
It is in the file ClientProfile I have placed in both App_Code and also App_Code/Models
In my code behind I have the following
[CODE]...
The last word, "ClientProfile" has the scary squiggly red line below it. It is not recognizing my class.Even the Intellisense is not picking up te class. Do I have to register the class file in any way?
Dim a as Type=GetType(className) would gimme the type. But I have only the name of the class as string. I want something like GetType("class1") which would return the type.
View 2 RepliesI can't make difference between public class and private class and friend and protected friend class.
View 1 RepliesI can do this without problem.
Class A
End Class
Class B : Inherit A
End Class
Dim Obj1 As A = New B
so I used to mess around with C#, just a little. And someone had helped me make a class for Visual C# that was supposed to do the math parts for "internal structure" - which the program used for a part of its calculations and screen... Basically there were 2 options. Endo-Steel and Standard. The user would use a updownbox to determine weight of the machine and then internal structure was a % of that total. If it was standard then it was 10% of the overall weight, if it was Endo-Steel then it was 50% of standard (so 5% of total weight) rounded to next 0.5 (so .25 was .5, 1.25 was 1.5, 1.75 was 2.0, etc). I have the code for the C# class file for it, but want to make it in VB.
[Code]...
I need to create unit testing project for my current website. The currentw ebsite si written in VB. All unit testing examples are using interface to create mock object. My current VB class does not implment any interface. Can I add interface and implement it to my current class and functions without affecting or changing codes to any pages in my website that call the functions? For examples my current class is like:
[Code]...
I've been creating short test apps repeatedly to try to understand some of the concepts in VB.NET.For the most part it has been illuminating.I read Bucky's .NET knowlegebase tutorial on passing objects as parameters to newly created forms. He shows how to create a new class that inherits from the base form class and define a New() method with parameters Extending the concept I thought about doing the same thing with a form that was created at design-time (In this case Form2).
[Code]...
Example:
Two files - TestClass.vb, myForm.vb
TestClass.vb looks as follows:
Imports System.Threading
Public Class TestClass
Private myClassThread As New Thread(AddressOf StartMyClassThread)
[code]....
The result:Application runs, no errors or exceptions.Displayed is the listbox and the Start button.I press the start button and a msgbox says "Not Invoked" as expected and upon clicking OK to that msgbox "Start Button Pressed" is added to the Output listbox control.Immediately following that the msgbox pops up again and says "Not Invoked". I was expecting "Invoked" as a separate thread is trying to use the Output listbox control.Of course this results in the Output.Items.Add being attempted which results in no visible result as the thread is not allowed to directly update the UI control.
I have some classes, BsfciFile and StudyFlashCard. Bsfci is the extension to which I save my set of flashcards in an INI format. I am currently working to transform my code from using Windows API calls to access the INI to using a IniFile class that I found on the internet. I would like the BsfciFile to have a Array of StudyFlashCard objects, but I would like the StudyFlashCard class to use the IniFile class object contained in the BsfciFile class. I can pass the IniFile from the BsfciFile class to the constructor for the StudyFlashCard class, but I want it to modify the same IniFile as the BsfciFile class has later on.
[Code]...
I have a class that is stored after serialization and compression.Is there any event built in the class that is fired automatically when a class is deserialized and ready to be used??
View 1 RepliesBase class has one field to hold numeric balance value. With 2 methods that accept arguments for adding and subtracting the new input calculating new balance. Sub class has four fields dates, transaction, memo and amount.I have a deposit form, and withdraw form. Each time one transaction is entered it creates an object with sub class fields, then adds to the account collection. My problem is not understanding how to call the deposit/withdraw method and pass the current transaction amount back to the base class to alculate the new balance. Does anyone have any links to information/tutorials on how to perform something like this? As you can see with my code I have tried various different approaches without any success.
[Code]...
Create a class named Service. Inside the Service class, declare a class variable named Started. The datatype of this variable is Boolean.Public Class Service Dim started as Boolean End Class Create a class named Server. Inside the Server class, declare a dynamic array that can contain elements of the type Service.(Note: For convenience, both the array and the variable Started can be accessible from a client program that creates an instance of Server and Service respectively)
Create a constructor for the Service class. When the constructor is executed, it will set the value of the class variable Started to True. Create two new classes: WebServer and DatabaseEngine. Both of these classes inherit from the class Service. Inside the Service class, declare a Sub procedure (method) named Terminate. This method should display the following text Service stopping in a message box when executed.This method can be overridden in classes that inherit from Service class.
Inside both the WebServer and DatabaseEngine class, override the method Terminate inherited from their base class Service. Both methods should first call the base class Terminate method. The messages Web server stopping and Database engine stopping should also be displayed in a message box when the Terminate method for the WebServer and DatabaseEngine are called respectively. These messages should only be displayed if the Started variable inherited from their base class is not equal to False.
Inside the Server class, declare a method named Shutdown. This method does not return any value. When executed, it will call the Terminate method for each of the Service instances (if any) in the arrServices
array. You should call the Terminate method within a For Each loop that loops through the elements of the arrServices array.
In the Sub Main method, create an instance of the class Server. Set the size of the arrServices array in
your Server instance to contain 2 elements. Create first a WebServer instance and then a DatabaseEngine
instance into this array. Call the Shutdown method from your Server instance.
I want to created a nested class that can only be visible to and instantiated from the parent class.But I also want to be able to use an instance of the nested class through a public variable of the parent class.I tried making the nested class private, or making the nested class' constructor private, but it won't compile.Is it possible to do this in .NET?
[Code]...
I want to read a number of items from a file and then associate each of those items with a new button at run-time, so that when the user clicks one of the buttons I can display some information about that item.Can I use a LIST to manage these buttons and items? Can I create a new class and have each list item of that class, such as 'btnID', 'btnText', etc... ?
View 2 RepliesE.g. I have a class:
Namespace Common
Public Class AClass
Public Class BClass
[code]....
How can I use BClass without saying AClass.BClass, I've see some existing code using this format, but I can't find the setting.
I'm making a custom class that mocks the System.Drawing.Rectangle class because the Rectangle class doesn't have a name property. I need a name property because I am adding all of my rectangles to a collection and I need a little more info stored than just their locale and size. So I changed the _onPaint event but nothing is working out when I run the program?
Public Class Rectanglar : Inherits UserControl
Public BackgroundColor As Color = Color.Blue
Public Sub New(ByVal name As String, ByVal XY As Point, ByVal Widthy As Integer, ByVal Heighty As Integer)
[code].....
Supose a base class
Public Class airplane
Private var_num_seats As Integer
Private var_num_engines As Integer
[code]....
Obviously, I don't wish that the class Glider has the method "start_engines" neither the property "num_engines". Otherwise, other child classes may have. How can I supress these property and method in child class, not just ignoring (if I can)?
I am trying to create a class in VB.NET which inherits a base abstract class and also implements an interface. The interface declares a string property called Description. The base class contains a string property called Description. The main class inherits the base class and implements the interface. The existence of the Description property in the base class fulfills the interface requirements. This works fine in C# but causes issues in VB.NET.
[Code]...
This is another one of my "I think it's not possible but I need confirmation" questions.I have a base class for a bunch of child classes. Right now, this base class has a few common properties the children use, like Name. The base is an abstract class (MustInherit)Technically, this means that everytime a child class is instantiated, it lugs around, in memory, its own copy of Name. The thing is, Name is going to be a fixed value for all instances of a given child. I.e., Child1.Name will return "child_object1", and Child2.Name will return "child_object2".
View 1 Replies