What i am trying to do now is to show the content of the dnsredir.ini file on the forms and able to edit it.
The dnsredir.ini file file looks like this
;Configuration INI file for DNS Redirector v6.4.7
Logging=Normal
ListenOnIP=172.23.128.33
[Code]......
i'm creating some PDF reports for my application, i wish to open them directly without saving them, so to allow the user to decide what to do with them.
I've build my procedure, i thinks it works fine (the same procedure with filestream instead of memorystram show me what i want).
But i don't know how to open the document written using memorystream...
I found this code on here to open a text fille, do a find & replace then save the changes, and the code is in a loop that will do that to every file in a given folder. My question is I also have files in sub folders, and more sub folders, and i'm not sure how deep it goes. I want to recursivly go though all the sub folders and do this to all the files, not just the files directly in the main folder.
Here is the code so far:
Code:
FolderBrowserDialog1.Description = "Select Path for files to edit"
FolderBrowserDialog1.ShowDialog
OpenPathVariable = FolderBrowserDialog1.SelectedPath
[Code].....
My Q is: How can i drag and drop a file into a rtb and have it show the content. Like Notepad++
View 6 RepliesI need to write data to a file, preferably in binary format, but I am unaccustomed with the concept. Where's the easiest place to get the basics? I could come here with a specific need, but I'm at the point right now where I am more willing to work within the confines of keeping it simple.
Here's what I know:
1. how to open a new file
2. how to specify the record length
3. how to close the file
Some specific questions:
Does the record length have to be constant throughout the file?
Can I read the nth record without reading the whole file?
I am working on a VB Console Application that takes an Autocad drawing type DWG and converts it to a PDF using a shell command that calls a third party application. In this case, acmecadconverter.exe from www.dwgtool.com. Then the PDF that is created needs a unique watermark, so I call a second application for that called pdftk.exe from www.accesspdf.com/pdftk/.
Everything works as intended, except when I try file names that contain spaces. The file system object does not tolerate spaces in the drawing file name. For instance, the following command gives me a system.io.filenotfoundexception...
My.Computer.FileSystem.RenameFile("Test Flowchart1.dwg", "Test~Flowchart1.dwg")
It's the same problem for all of my File System commands. Either file not found or invalid arguments.
The complete script I'm using is here:
Code:
Sub Main()
Dim arrArgs() As String = Command.Split(","), _
i As Integer, folderPath As String, myPart As String, _
[Code].....
I'm currently developing an editor for an AFL management sim.I want to be able to load three or four multidimensional arrays to the program, then save them to the same file. I tried the tutorial on here but got completely muddled up. Why can't it be easy like in VB6 When it was like 10 lines of code tops!
View 5 RepliesI am writing a program to calculate Pi to several hundred billion decimal places and this will require lots of GB of memory. I wrote a test program in VB2008 that saved the first 16 digits of Pi (without the decimal point) to both a text file and a random access file, just to be sure it was outputting the numbers properly. For reference the first 16 digits of Pi are:
View 8 RepliesI have a program that can save to a .txt file.The issue is I need it to be done in a tab delimited way.Basically:
TextHere<Tab>TextHere<Tab>TextHere<NextLine>
TextHere<Tab>TextHere<Tab>TextHere<NextLine>
I have this so far, but all it does is put the TextBox1.Text next to TextBox2.Text
Code:
SaveFileDialog1.Filter = "Text files (*.txt)|*.txt|All files (*.*)|*.*"
Dim FileWriter As StreamWriter
Dim results As DialogResult
[code]....
Our program will start with the help of a FileSystemWatcher object. How can we check or the file is total copied, for example the file is 100 Mbyte it take a time it's ready for use. Idea:
Do While True
Try
N = testForUse(BigFile)
If N = 1 Then Exit Do
[CODE]...
I want to be able to able to read the dimensions of a TIF image without loading the entire file.
PS Using Visual Basic 2008 on Vista64.
I don't know whether it is simple or not because i am new to programming. my requirement is : In my vb.net winform application, the filenames of the files present in "D:Project" willbe displayed in DataGridView1 control. Now I want to load these files one after another into memory stream buffer and add the headers("ID","Name","Class") to the content in the file. Then I want to save these files in "C:" with "_de" as suufix to the filename i.e.,sample_de.csv.
View 1 RepliesI have to generate an XML file from several database tables. I could use the WriteXml method of the DataSet to do it, but the database tables are really huge and I can't add all those tables in the DataSet at the same time or it may cause a problem because of the big amount of memory used. Then I decided to use the DataTable's WriteXml method and save table after table, but the the generated file only stores the information of the last DataTable.WriteXml's call. How can I preserve the previous XML data when adding all that information?
View 4 RepliesI cannot read filename in response header:Content-Disposition: inline; filename="
View 6 RepliesI have a textbox on a form that is set to allow dragdrop operations from txt files.Basically you drag a .txt file onto the txtbox, the content of the text file is displayed in the textbox.All is working fine, however after the textfile is displayed in the textbox, the text box text is for some reason is highlighted.I don't want the text to be highlighted (or selected) after it's being displayed on the textbox.Second issue, after I close the file that I dragged, for some reason even if I didn't make any changes to the file, it is acting as if the file has changed.In another words, if I open a text file using my MenuItem Open item, and if I do not change the file, If I close the file it's fine it closes.However, if I close a file that I draged into the text box and then close the file without changing anything in it, the stringcompare function is telling me that the file has changed... I can't understand why.
View 6 RepliesError is coming Registry Access is not allowed.While Opening a Key.
Code:
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
NewDelete("HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun", "Sonia")
End Sub
[CODE]...
I've had a bit of a look around the net and on the forums but I've yet to find an answer to my question. I've got Visual Basic 2008 Express and I'm trying to write some registry entries, I can write strings fine just using
[Code]...
I've gone through about 16 hours and two packs of cigarettes trying to figure this out. First a little background. I was using 6.0 up until 2004 when I went to prison. I'm out now, and trying to relearn the trade, using VS 2005. I'm currently porting some 6.0 code from another project, SpyCast Webcam Studio, into VB 8.0. It's disheartening, to say the least. None of the old built-in subs/functions work anymore, so I have to scour the forums to relearn each and every function.The section I'm doing now takes a snapshot from the webcam (Video API --> PictureBox --> Save as Jpeg), then upens the file to upload it to the server via HTTP POST. I've been using this code in SpyCast for years with no trouble, but I spent many hours trying to piece together the right code to open the binary file to read its contents. I pieced together two methods I found around the forums, one using FileStream() though the code I found wasn't for binary files, even though it said it was, so that code doesn't really work. Method two uses Microsoft.VisualBasic.FileOpen() and works better.
Here's the kicker. By the time I run through the rest of the rigamarole of uploading the file, by the time I read it on the webserver, it's *slightly* corrupted. It's a valid Jpeg, no errors, but the picture looks like when I use to watch the Playboy Channel when I was a kid scrambled with weird colors and whatnot. [code] Each "chunk" is basically one "line" of the file. It looks like a single LineInput() return is the text between two carriage returns. Am I correct? I tested this with a flat text file, and it looks true. However, That one input line returns the text or data with the carriage returns *stripped*! ***?!? =( Fine, I have no problem adding my own vbCrLf to each LineInput(), if I were opening text. but this's binary. A character could be Chr(10) or Chr(13), both of which are removed from the original file contents.So I could very well need to use something other than LineInput(), but I haven't found any other examples on the web using this method.
trying to find a decent answer for my question; I do have a utf8 file which I (down)load, manipulate and wanting to save back again.The result always is that the file I produce is not in utf8 format;
Dim fs2 As New FileStream("c: est.dat", FileMode.Create, FileAccess.Write, FileShare.None)
Dim w As New BinaryWriter(fs2, Encoding.UTF8)
[code].....
trying to input a text file that's tab delimited that looks something like this.
2.2 5.6
3.7 9
1.2 9.1
[code].....
i am working on an application called logonscreenchangerxp i made my program and when i run it on xp virtualmachine i get errors the program is made using vb 2008 and using .net framework 2.0 i am not able to get full permissions to modify boot.ini file and a regisrty value and to delete a file
View 5 RepliesCurrently, I am try to get the email addresses that have been saved or stored by the user of the computer. This isn't the emails that the user has sent or received, or the contacts he/she has in his address book. Just simply the email accounts that have been accessed from the computer.I know that there are some locations stored in the registry that have the email account. The email addresses that are used on the current computer. I just can't seem to find them on my computer.I am not sure if the registry is the only place to find it or if it stored on the web browser such as internet explorer or google chrome.
View 1 RepliesI am writing an application that connects to a specific com port. This com port can change depending on how many physical ports are on the PC, and if other USB devices have installed com ports before this one.
I have the communication to the com port all working great, but I need to get the com port description not just the "COM#" which is all I currently get.
I found in the registry where the description is stored but am having trouble doing what I need.
In this key:
Code:
HKEY_LOCAL_MACHINESYSTEMControlSet001ControlClass{4D36E978-E325-11CE-BFC1-08002BE10318}
there is a varied number of sub keys. The are numbered 0000-NNNN depending on how many ports you have. Inside each of these keys, there are multiple values, although I am only interested in one or 2 of them.
My problem is, that I do not know how to get a list of the subkeys (the 0000-NNNN keys/folders) from the original key I posted. I have looked through a few registry tutorials, and I can view the default value in the listed key, but I could not find how to list the subkeys of the listed key.
Does anyone have any sample code they could share that shows how I can get a listing of subkeys, and then run through those subkeys checking for a specific value in one of the strings contained in the subkey?
I am using VB.net 2008 and Windows XP.
I am writing a backup program that zips files. Using some sample code I have the following that creates a zip file. Problem is it does not get any subdirectories or files. Where am i going wrong?
Dim azFileNames() As String = Directory.GetFiles(SourceFolder)
Dim objCrc32 As New Crc32()
Dim zipStream As ZipOutputStream
[CODE]...
Alternativley, there is another component to the zipping dll that I could probably bypass the above altogether. It is: FZ.CreateZip(DestFile, SourceFolder, True, "", "") Where DestFile is (Output stream as system.io.stream). I'm trying to read all the files, directories, sub dir and files, etc from a specific location, let's say 'My Documents' into Destfile in which the FZ.CreateZip zips the file. FZ is FastZip which is from icsharpcode.net. They have c# examples, but that's greek to me. I'm trying to just learn VB!
I've got an app which uses a background worker to copy files. It works fine but some files are quite large and it "appears" as though the app isn't doing anything. Is there an alternative to the File.Copy method of copying files so I can report on the progress of individual file copies, like the percentage complete?
View 19 RepliesI need to implement a routine to read a plain text file, BUT that file has a predefined format.The file format is as follows:
Quote:
<FILE_PROPERTIES> 'The "< >" also appears
Propertie1="String" 'It's possible to have spaces after or before the "="
Propertie2="String"
Propertie3="String"
PropertieN="String"
[code]....
Is there any Windows API Routine to read something like that?Or could you point me an URL where something is implemented?I don't want a procedure to read the file line by line and comparing them with Line Input because blank spaces, empty lines and comments starting with " // " may appear too, and I don't want to take them into account, but also I need to save changes to the file, but only to the modified section, without having to read the whole file, and re-write it completely.
Binary access can't work, because I don't know what's the size of each "section", since the number of elements into it can change.
I need something like the "ReadINI" Windows API Procedure, but allowing me to read the "[XXX]" sections headers, and also the "<XXX>" file title header.
Before I begin I would like to mention that I am not a noob in VB, it's just I've never had to do anything this complex before. Basically what I want is to have a program that you can load a txt file in, have it copy key words, and paste it in a textbox so I can use it later on. So in this text file, there is a bunch of info, but I am only needing a certain part. Here is an example of a text file (actually a .dat file, but is easily read):
[Code]...
My application runs on a "server" machine and provides files (10megs - 100megs each) to 8 other computers. Currently this is done using a standard shared folder on all 8 computers and the server simply copies the file to \ComputerNameSharedFolder - and everything is great.However, due to new policies we need to remove all shared folders, so using a simple \ComputerNameSharedFolder is no longer feasible. Therefore I need to find a way for my application to be able to share these files in a safe, secure, and compliant way.There has been talk of using sFTP which would require each system to have an sFTP server running at all times (controlled by the application somehow), or also SSL was talked about as it can be integrated into the application easily, etc...
View 1 Replieshow to save information into a text file from runtime VB2005. However, I wish to be able to write the information into any kind of form of file that cannot be simply opened and read by anyone (such as text file can be). Is there anyway that VB2005 can do this?
View 2 RepliesI'm using the SaveFileDialog to save listbox info into a text file. The files save fine, but when you go to save the file, if you hit the cancel button, it will overwrite the previous file you saved, because it's name was the same and it seems to save the previous file as the new name for your next file. Is there any way to catch if the user clicks cancel, and then exiting the sub if they did?
View 2 Replies