File I/O And Registry :: Implement A Routine To Read A Plain Text File?
Mar 21, 2010
I need to implement a routine to read a plain text file, BUT that file has a predefined format.The file format is as follows:
Quote:
<FILE_PROPERTIES> 'The "< >" also appears
Propertie1="String" 'It's possible to have spaces after or before the "="
Propertie2="String"
Propertie3="String"
PropertieN="String"
[code]....
Is there any Windows API Routine to read something like that?Or could you point me an URL where something is implemented?I don't want a procedure to read the file line by line and comparing them with Line Input because blank spaces, empty lines and comments starting with " // " may appear too, and I don't want to take them into account, but also I need to save changes to the file, but only to the modified section, without having to read the whole file, and re-write it completely.
Binary access can't work, because I don't know what's the size of each "section", since the number of elements into it can change.
I need something like the "ReadINI" Windows API Procedure, but allowing me to read the "[XXX]" sections headers, and also the "<XXX>" file title header.
Im trying to use File.ReadAllLines to read a DLL that has plain text. (the DLL is basically a text file) [code] The process cannot access the file '****DebugNewFile.DLL' because it is being used by another process.How do I use readalllines to find text? How do I use readalllines to only search a part of the text file?
Before I begin I would like to mention that I am not a noob in VB, it's just I've never had to do anything this complex before. Basically what I want is to have a program that you can load a txt file in, have it copy key words, and paste it in a textbox so I can use it later on. So in this text file, there is a bunch of info, but I am only needing a certain part. Here is an example of a text file (actually a .dat file, but is easily read):
i have 5 textboxes in a form. I have a streamwriter that writes all of their text to on text file like this:
Code: Dim xfile As String = Application.StartupPath & "/Set.txt" If File.Exists(xfile) = True Then Dim writex As StreamWriter = New StreamWriter(xfile)
[code]....
I was wondering how to get the text under the each number and place it in the corresponding textbox.
I have a coma seperated text file with loads of records. Usually when we read a text file we start from the first line and go towards the last. I know that there will be x comas per record.
But I want to start reading from the last line and then towards the top. This enables me to stop before I reach the top (depending on the data).
What would be the fastest way to read a text file in VB.NET. I am using VS2008. Basically I want to read from last line and stop when I want. I may not need to read the entire file.
I want to write a generic file saving routine where the routine is passed data in the form of a collection and it sets a containsStructure flag. I wanted to be able to save the data from the collection, but if it is a collection of structures I want to be able to extract the data from the structure to write to the file.
The only trouble is, that I cannot do something like: For Each s As dataStructure In data Next Since the compiler complains that dataStructure is not defined. Is there a way to code around this?
I need to write data to a file, preferably in binary format, but I am unaccustomed with the concept. Where's the easiest place to get the basics? I could come here with a specific need, but I'm at the point right now where I am more willing to work within the confines of keeping it simple.
Here's what I know: 1. how to open a new file 2. how to specify the record length 3. how to close the file
Some specific questions:
Does the record length have to be constant throughout the file?
Can I read the nth record without reading the whole file?
I'm trying to use VB.NET to process a very large plain text file (2 GB). It is a database and has a field delimiter of SOH and a record delimiter of STX.
I want to separate the fields and records of the file.
I would normally read each line of a text file and then use the split function to separate out the fields. I can't use this approach as there isn't always a delimiter on every line.
Is there any way to read a file until STX is found (rather than one line at a time)?
I'm sort of new to VB and have to use it for my Software Design & Development Major Project.I'm making a blackJack game, and i the names of all users in a file called "CurrentUserNames.txt".I'm struggling to get VB to read this file (items are line by line not separated by a comma or something) and then save it into an array called CurrentUsers(). This array is then displayed in a listbox called "lstAllUsers".I can get VB to read the file and put the FIRST item in the file into the FIRST line of the list box, or i can get VB to put ALL the items in the file into the listbox, separated by the little [] squares when the program runs e.g listbox, line 1 says - "Current [][] Names".[code]
I've gone through about 16 hours and two packs of cigarettes trying to figure this out. First a little background. I was using 6.0 up until 2004 when I went to prison. I'm out now, and trying to relearn the trade, using VS 2005. I'm currently porting some 6.0 code from another project, SpyCast Webcam Studio, into VB 8.0. It's disheartening, to say the least. None of the old built-in subs/functions work anymore, so I have to scour the forums to relearn each and every function.The section I'm doing now takes a snapshot from the webcam (Video API --> PictureBox --> Save as Jpeg), then upens the file to upload it to the server via HTTP POST. I've been using this code in SpyCast for years with no trouble, but I spent many hours trying to piece together the right code to open the binary file to read its contents. I pieced together two methods I found around the forums, one using FileStream() though the code I found wasn't for binary files, even though it said it was, so that code doesn't really work. Method two uses Microsoft.VisualBasic.FileOpen() and works better.
Here's the kicker. By the time I run through the rest of the rigamarole of uploading the file, by the time I read it on the webserver, it's *slightly* corrupted. It's a valid Jpeg, no errors, but the picture looks like when I use to watch the Playboy Channel when I was a kid scrambled with weird colors and whatnot. [code] Each "chunk" is basically one "line" of the file. It looks like a single LineInput() return is the text between two carriage returns. Am I correct? I tested this with a flat text file, and it looks true. However, That one input line returns the text or data with the carriage returns *stripped*! ***?!? =( Fine, I have no problem adding my own vbCrLf to each LineInput(), if I were opening text. but this's binary. A character could be Chr(10) or Chr(13), both of which are removed from the original file contents.So I could very well need to use something other than LineInput(), but I haven't found any other examples on the web using this method.
I know this script [below] gives the pc motherboard number ,...well I would like to know how to write the result number as plain text somewhere in the windows, in a folder, or registry , or in a harddisk volume,... I know I could use
FileSystemObject CreateTextFile
I dont know how to insert it in the code , I tried but it gives me error
Code: strServer = "." Set objWMI = GetObject("winmgmts://" & strServer & "/rootcimv2") Set objInstances = objWMI.InstancesOf("Win32_BaseBoard",48)[code].....
I am working on a program with multiple collections related to one another for a school project. Each collection needs to have its own defined properties and have the objects written (1 per line) to a text file.
I have all of that working.
When reading the comma-separated line from the file, I want to place one of the properties of the object in a listbox (so that all the objects' names will show up in the listbox). I think I have this part figured out...
My problem is that when you click on the name in the listbox, I would like multiple text boxes to be populated with the appropriate, corresponding properties of the particular object in the collection...is there a way for this to be done?
I want to read the meta data from a movie file and place the result in to a textbox.I've googled it and found no good samples for vb.net =( The data I'm interested in are the bitrate and the resolution and the extensions I'm interested in are .wmv, .avi and .flv the extension isn't known when the program loads because the movie is going to be inputted by the user..
I am writing a program to calculate Pi to several hundred billion decimal places and this will require lots of GB of memory. I wrote a test program in VB2008 that saved the first 16 digits of Pi (without the decimal point) to both a text file and a random access file, just to be sure it was outputting the numbers properly. For reference the first 16 digits of Pi are:
I have several programs that must write to HKLM in XP and Windows 7/64 Pro.The programs work in VB6 but not in VB.Net 2008 on target machines. It does works on our development machine. [code]I just cannot figure out why VB6 works but .net doesn't and fails only on the target machine not the development machine.
I need to read the following file in vb .net:"C:WindowsSoftwareDistributionDataStoreDataStore.edb". It contains info about installed software updates. I've taken a look at the file by opening it with notepad. This isn't a plain-text file obviously, but I can find and see the text I want easily with Notepad, and I want to extract this text by using VB .NET.
The problem is, i've tried to read the file by using an io.streamreader, but I can't get the same results as in notepad. I've tried to change encoding but that doesn't work. I mean in Notepad, I can read some text easily: "A s e c u r i t y i s s u e h a s b e e n i d e n t i f i e d" [...], but the only thing I get with the streamreader is some bunch of ugly characters, and the text I saw with Notepad isn't there.
Do I have to read the file in binary or what? HOW NOTEPAD DOES IT? HOW DO I READ THIS FILE LIKE NOTEPAD DOES?I absolutely need to extract some updates info that aren't in either the registry or WMI/QFE.
So I'm in the final stages of finishing a program I've been working on for nearly a year now, and this is basically my final hurdle. The Save dialogue is working beautifully, with 'flags' in order to switch it over from the regular input into text boxes to the Listbox input protocol.
However, I'm having a *** of a time getting it to take lines from the text file and put them in the proper text box. Here is an example file:
Quote:
SHOWNAME CALLNAME BREED
[Code]....
So with the sample file I provided above, in the textbox named callNameText would appear "SHOWNAME", and so on and so forth. With this build, I get a NullReferenceException on the "Me.Controls(strboxNames(i)).Text() = strAllText(ati)" line.
I have basic text report (.txt) that is created by a custom application. My client would like it to page break at a certain spot.
Does anyone have a routine that would allow me to insert PCL code into the file so that when printed it page breaks? I'd search for certain text and then insert the codes just prior to the text.
Certainly if someone has a better "mousetrap" then let me know.
I have written a text editor for an assignment but I am struggling on where to start on this bit. What I Want To Happen:- When the user saves there work I want the name of the file to be shown next to the name of the program at the top left hand side of the form. I am not sure If I just need to create a simple sub routine for adding the name of the file then calling the method in the save as routine.
I have a txt file that I need to read into a listview, but I need to read from a specific line in that file. Below is a sample of the txt file to read,
how to save information into a text file from runtime VB2005. However, I wish to be able to write the information into any kind of form of file that cannot be simply opened and read by anyone (such as text file can be). Is there anyway that VB2005 can do this?
I'm using the SaveFileDialog to save listbox info into a text file. The files save fine, but when you go to save the file, if you hit the cancel button, it will overwrite the previous file you saved, because it's name was the same and it seems to save the previous file as the new name for your next file. Is there any way to catch if the user clicks cancel, and then exiting the sub if they did?
I need to be able to change a path inside a document ( a config file to a program) to the current directory of the application im creating in VB so the text file looks something like
I have one combobox, two buttons (Add and View) and listbox. When I click button Add text from combobox is added to text file. This is code for Add button:
I created an application that when a user logs onto their Windows account, a Form is displayed outlining the current Computer Usage policy set by the insitution and gives the user two options either Agree or Dis-Agree. The two options are in the form of buttons, with events that depending on what the user clicked, will create a log text file at a specified location, with enteries of Date,Time,CurrentUser, and if they agreed or disagreed. If they agreed the application after creating/amending the file will then terminate, otherwise it will update the file and then force Windows to logoff the current user.
Now I made a shortcut of the .exe of the application and placed it in the startup for all users, and yes the application loads at startup for all the users following the procedures mentioned above. The problem I am facing is, that if the current user logs off, or is forced to log off, and another user logs onto Windows, goes through the whole ordeal mentioned above, the application is denied access to the logfile that was created under the previous user, and thus crashes.
So my question is, how can I created a text file using vb 2008 application, that is accessible by multiple Windows users. I have even tried changing the location of the created file to the shared folder, but the end result is the same.
I know that Deleting a specific line in a sequential text file is impossible but instead copy the needed lines and not copying the unneeded ones to an output file .. killing the old one and renaming the new one with the same.. I can't make this step...
Code: "Josek Sam","68 West Land Street","149 Union of States","4524563","45635463","JOSKSAM1",#2009-03-02#,"MILANCGLZ2008" "Josef Malm","142 Unions Street","64 Hamersters Street","452504","42542054","JOSFMALM2",#2009-03-06#,"MILANCGLZ2008" "Dave Green","131 Oxford Street","96 BlueBane Route","452542452","43254345","DAVGRN3",#2009-03-07#,"MILANCGLZ2008"
I made a form that when you put your CustomerID in Text3 Box.. it access the records and make some calculations. now.. The customer will return the car.. Then his data should be deleted.. I want to know how to make that when I enter the CustomerID and press on the Command button .. It copies the other lines to a new output folder and doesn't copy these ... So it appears to be deleted using this way..
