File I/O And Registry :: Read One Text File And Put Lines In Different Text Boxes?
May 12, 2009
i have 5 textboxes in a form. I have a streamwriter that writes all of their text to on text file like this:
Code:
Dim xfile As String = Application.StartupPath & "/Set.txt"
If File.Exists(xfile) = True Then
Dim writex As StreamWriter = New StreamWriter(xfile)
[code]....
I was wondering how to get the text under the each number and place it in the corresponding textbox.
So I'm in the final stages of finishing a program I've been working on for nearly a year now, and this is basically my final hurdle. The Save dialogue is working beautifully, with 'flags' in order to switch it over from the regular input into text boxes to the Listbox input protocol.
However, I'm having a *** of a time getting it to take lines from the text file and put them in the proper text box. Here is an example file:
Quote:
SHOWNAME CALLNAME BREED
[Code]....
So with the sample file I provided above, in the textbox named callNameText would appear "SHOWNAME", and so on and so forth. With this build, I get a NullReferenceException on the "Me.Controls(strboxNames(i)).Text() = strAllText(ati)" line.
I have a text file containing lines of data (File 1). I need to delete all the lines in another text file (File 2), which are found in file 1.So I could read file 2 line by line. And then once the line has been read, read file 1 line by line to search for a match. But that's going to be painfully slow.Or I could read file 2 into memory. And then read file 1 line by line and REPLACE the lines in file 2 with nothing, therefore deleting them. File 2 could be 100 mb, so I'm not sure about reading it all into memory.
I know that Deleting a specific line in a sequential text file is impossible but instead copy the needed lines and not copying the unneeded ones to an output file .. killing the old one and renaming the new one with the same.. I can't make this step...
Code: "Josek Sam","68 West Land Street","149 Union of States","4524563","45635463","JOSKSAM1",#2009-03-02#,"MILANCGLZ2008" "Josef Malm","142 Unions Street","64 Hamersters Street","452504","42542054","JOSFMALM2",#2009-03-06#,"MILANCGLZ2008" "Dave Green","131 Oxford Street","96 BlueBane Route","452542452","43254345","DAVGRN3",#2009-03-07#,"MILANCGLZ2008"
I made a form that when you put your CustomerID in Text3 Box.. it access the records and make some calculations. now.. The customer will return the car.. Then his data should be deleted.. I want to know how to make that when I enter the CustomerID and press on the Command button .. It copies the other lines to a new output folder and doesn't copy these ... So it appears to be deleted using this way..
I have a text file containing 10 pieces of information. I want to read the information from the text file and put it in text boxes on a form, so that the user can view the information and edit if required. What is the best way of approaching this?
I a very large text document, I need to read some lines and at the end of each line, insert a text from the header of each page to he preceding lines.I have the following code the reads the file and displays it on a list box.Public Class Dialogs..[code]
I need to implement a routine to read a plain text file, BUT that file has a predefined format.The file format is as follows:
Quote:
<FILE_PROPERTIES> 'The "< >" also appears Propertie1="String" 'It's possible to have spaces after or before the "=" Propertie2="String" Propertie3="String" PropertieN="String"
[code]....
Is there any Windows API Routine to read something like that?Or could you point me an URL where something is implemented?I don't want a procedure to read the file line by line and comparing them with Line Input because blank spaces, empty lines and comments starting with " // " may appear too, and I don't want to take them into account, but also I need to save changes to the file, but only to the modified section, without having to read the whole file, and re-write it completely.
Binary access can't work, because I don't know what's the size of each "section", since the number of elements into it can change. I need something like the "ReadINI" Windows API Procedure, but allowing me to read the "[XXX]" sections headers, and also the "<XXX>" file title header.
Before I begin I would like to mention that I am not a noob in VB, it's just I've never had to do anything this complex before. Basically what I want is to have a program that you can load a txt file in, have it copy key words, and paste it in a textbox so I can use it later on. So in this text file, there is a bunch of info, but I am only needing a certain part. Here is an example of a text file (actually a .dat file, but is easily read):
I have this code now doing and that is creating my chart from data off a text file. The final task I need to be able to do, to complete my program is have a way to select how many days of data to populate my chats with via a Text Box input. I am thinking I will need to read the complete text file first to count how many lines are in it, then what ever is put in the text box it will take that many lines of data from the text file and populate the chart. For this to work correctly it would have to read the lines of the file back wards.(last line of file would be the first line..) e.g. textbox1.text = "7" then the chart would show only the last 7 lines of my data.
I was looking up examples of Counting the lines in the file, I think I am close here... Dim fso As New FileSystemObject Dim txt As TextStream Set txt = fso.OpenTextFile(ReadChart, ForReading) txt.ReadAll Textbox2.text & txt.Line & " line(s)." [Code] .....
I want to make a program that reads the line of a file, and puts it into a text box, then reads the second line in that file, putting it in another text box... Say i only have a file with two lines, how can i do this?I have written a code, but it only works for the first line. Is there a preset function in Visual Basic that will allow me to read a certain line?
Imports System.IO.StreamReader Dim AllText As String = vbNull, Lineoftext As String = vbNull Dim Open_File As New OpenFileDialog ' Dim Open_File as a Open File Dialog
I have a coma seperated text file with loads of records. Usually when we read a text file we start from the first line and go towards the last. I know that there will be x comas per record.
But I want to start reading from the last line and then towards the top. This enables me to stop before I reach the top (depending on the data).
What would be the fastest way to read a text file in VB.NET. I am using VS2008. Basically I want to read from last line and stop when I want. I may not need to read the entire file.
I would like to read a file and display certain lines ( like from line 5 to 10) in a label. i know how to read the file line by line but not the specified line i want.
i wanna read lines from a text file randomly until all the lines are read & wanna set a time interval in each two words apart. think a piece of code to do that in vb.net?
I am trying to read from a file that was created with a stream writer the names line from the text file that contains data for name, phone number, pager number, cell number, voice mail, and email.What I need to do is read and load the names from the file into a list box, and then from the list box be able to choose each name and have the information (phone, pager, cell, etc.) show up in text boxes that goes with the specific name.
I have one combobox, two buttons (Add and View) and listbox. When I click button Add text from combobox is added to text file. This is code for Add button:
I have code to show I tried to do it on my own, to boot!
Private Sub OpenPetProfileToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OpenPetProfileToolStripMenuItem.Click Dim AllText As String = "", LineOfText As String = ""
[Code].....
This save command works perfectly except for the lstshowresults, which I'm having issues getting to appear in the print line bit, but that's for another time.
I've been writing a weight program for flooded pressure vessels and I'm having trouble retrieving the data from the text files I've been saving. I know how to write the data to the text file, but retrieving it with OpenFileDialog is not so easy for me.The user has individual text boxes that they input strings or numbers into and when they save the file, each text box input is written to one line in the text file. For example, the first text box is for the username, therefore the first line of text that is saved is the person's name, the second text box is the customer, thus the second line in the text file is the customer name, and so on.
(Actually, the first line of text in the saved file designates whether English units were used or Metric units because when the user retrieves the saved file, English units will open one form and Metric units will open a separate form, so some If...Then statement will need to occur).I need to be able to read the first line, have either my "EnglishForm"form open or my "MetricForm" form open, and then have each subsequent line of text be displayed in their corresponding text boxes. I know I need to use ReadLine or LineInput, but I don't have a clue what to do.Assuming the syntax I've displayed below would just magically work (if only life were that easy), it would look something like this
If FirstLineOfTextInFile = "English" Then EnglishForm.Show() ElseIf FirstLineOfTextInFile = "Metric" Then[code]....
And so on...I read a lot of articles from the MSDN library and exhausted each link that I've looked through from Google and Bing, but most only retrieve data from the file to a single text box through some loop or streamreader and don't take into account multiple forms.
Ok so I have a combo box that lists a set of names. What I want to do is match a selected name to a text file and read from it. The text file contains the same name and has grades listed below:
I want to split each line at the comma and write the left side to a textbox and the the right side to another textbox. I'm close, with the code below, but I can only post results from the first line in the file. How do I loop this and append the text results in each of the textboxes.
Dim TempFile As String TempFile = "temp.txt" Dim sw As StreamWriter
how to permanently save to text files then re-open all of the information again using SFD and OFD. Now my teacher has come back at me and said that i need to be able to save the information from multiple text boxes and have the text in certain labels to also be saved into the one text file (the labels need to be done because it is a database and these labels are like the fields and the right text box needs to match the right label)
I am writing a program to calculate Pi to several hundred billion decimal places and this will require lots of GB of memory. I wrote a test program in VB2008 that saved the first 16 digits of Pi (without the decimal point) to both a text file and a random access file, just to be sure it was outputting the numbers properly. For reference the first 16 digits of Pi are:
I need to to able to save multiple text-boxes and a combo-box to a text file. the thing is, when I go to save, I check out the .txt file manually and its saved all in one line, no spaces. when I go to "read" it with the 2nd part (<-----this is a 2 part Challenge) it even reads all from that one line in the text file. What i'm asking is how can I make my text-boxes saved in the text file on different lines. [Code]
I have a text file containing ten pieces of information (5 prices and 5 descriptions) I want to load the information from the text file in to the text boxes, so that it can be viewed and edited if required.
I've declared the filename, and various variables, but I'm not sure how to get the info from the file to my form?
filename = CurDir() & "/charges.txt"
Could I use something like this:
fileopen(1, filename, openmode.append) do while not EOF(1) ... ...