I need to read the following file in vb .net:"C:WindowsSoftwareDistributionDataStoreDataStore.edb". It contains info about installed software updates. I've taken a look at the file by opening it with notepad. This isn't a plain-text file obviously, but I can find and see the text I want easily with Notepad, and I want to extract this text by using VB .NET.
The problem is, i've tried to read the file by using an io.streamreader, but I can't get the same results as in notepad. I've tried to change encoding but that doesn't work. I mean in Notepad, I can read some text easily: "A s e c u r i t y i s s u e h a s b e e n i d e n t i f i e d" [...], but the only thing I get with the streamreader is some bunch of ugly characters, and the text I saw with Notepad isn't there.
Do I have to read the file in binary or what? HOW NOTEPAD DOES IT? HOW DO I READ THIS FILE LIKE NOTEPAD DOES?I absolutely need to extract some updates info that aren't in either the registry or WMI/QFE.
I need to write data to a file, preferably in binary format, but I am unaccustomed with the concept. Where's the easiest place to get the basics? I could come here with a specific need, but I'm at the point right now where I am more willing to work within the confines of keeping it simple.
Here's what I know: 1. how to open a new file 2. how to specify the record length 3. how to close the file
Some specific questions:
Does the record length have to be constant throughout the file?
Can I read the nth record without reading the whole file?
I need to read the following file in vb .net: C:WindowsSoftwareDistributionDataStoreDataStore.edb". It contains info about installed software updates. I've taken a look at the file by opening it with notepad. This isn't a plain-text file obviously, but I can find and see the text I want easily with Notepad, and I want to extract this text by using VB .NET.
The problem is, i've tried to read the file by using an io.streamreader, but I can't get the same results as in notepad. I've tried to change encoding but that doesn't work. I mean in Notepad, I can read some text easily: "A s e c u r i t y i s s u e h a s b e e n i d e n t i f i e d" [...], but the only thing I get with the streamreader is some bunch of ugly characters, and the text I saw with Notepad isn't there.
Do I have to read the file in binary or what? HOW NOTEPAD DOES IT? HOW DO I READ THIS FILE LIKE NOTEPAD DOES?
I absolutely need to extract some updates info that aren't in either the registry or WMI/QFE.
I've gone through about 16 hours and two packs of cigarettes trying to figure this out. First a little background. I was using 6.0 up until 2004 when I went to prison. I'm out now, and trying to relearn the trade, using VS 2005. I'm currently porting some 6.0 code from another project, SpyCast Webcam Studio, into VB 8.0. It's disheartening, to say the least. None of the old built-in subs/functions work anymore, so I have to scour the forums to relearn each and every function.The section I'm doing now takes a snapshot from the webcam (Video API --> PictureBox --> Save as Jpeg), then upens the file to upload it to the server via HTTP POST. I've been using this code in SpyCast for years with no trouble, but I spent many hours trying to piece together the right code to open the binary file to read its contents. I pieced together two methods I found around the forums, one using FileStream() though the code I found wasn't for binary files, even though it said it was, so that code doesn't really work. Method two uses Microsoft.VisualBasic.FileOpen() and works better.
Here's the kicker. By the time I run through the rest of the rigamarole of uploading the file, by the time I read it on the webserver, it's *slightly* corrupted. It's a valid Jpeg, no errors, but the picture looks like when I use to watch the Playboy Channel when I was a kid scrambled with weird colors and whatnot. [code] Each "chunk" is basically one "line" of the file. It looks like a single LineInput() return is the text between two carriage returns. Am I correct? I tested this with a flat text file, and it looks true. However, That one input line returns the text or data with the carriage returns *stripped*! ***?!? =( Fine, I have no problem adding my own vbCrLf to each LineInput(), if I were opening text. but this's binary. A character could be Chr(10) or Chr(13), both of which are removed from the original file contents.So I could very well need to use something other than LineInput(), but I haven't found any other examples on the web using this method.
I need to implement a routine to read a plain text file, BUT that file has a predefined format.The file format is as follows:
Quote:
<FILE_PROPERTIES> 'The "< >" also appears Propertie1="String" 'It's possible to have spaces after or before the "=" Propertie2="String" Propertie3="String" PropertieN="String"
[code]....
Is there any Windows API Routine to read something like that?Or could you point me an URL where something is implemented?I don't want a procedure to read the file line by line and comparing them with Line Input because blank spaces, empty lines and comments starting with " // " may appear too, and I don't want to take them into account, but also I need to save changes to the file, but only to the modified section, without having to read the whole file, and re-write it completely.
Binary access can't work, because I don't know what's the size of each "section", since the number of elements into it can change. I need something like the "ReadINI" Windows API Procedure, but allowing me to read the "[XXX]" sections headers, and also the "<XXX>" file title header.
Before I begin I would like to mention that I am not a noob in VB, it's just I've never had to do anything this complex before. Basically what I want is to have a program that you can load a txt file in, have it copy key words, and paste it in a textbox so I can use it later on. So in this text file, there is a bunch of info, but I am only needing a certain part. Here is an example of a text file (actually a .dat file, but is easily read):
I am working on a program with multiple collections related to one another for a school project. Each collection needs to have its own defined properties and have the objects written (1 per line) to a text file.
I have all of that working.
When reading the comma-separated line from the file, I want to place one of the properties of the object in a listbox (so that all the objects' names will show up in the listbox). I think I have this part figured out...
My problem is that when you click on the name in the listbox, I would like multiple text boxes to be populated with the appropriate, corresponding properties of the particular object in the collection...is there a way for this to be done?
I want to read the meta data from a movie file and place the result in to a textbox.I've googled it and found no good samples for vb.net =( The data I'm interested in are the bitrate and the resolution and the extensions I'm interested in are .wmv, .avi and .flv the extension isn't known when the program loads because the movie is going to be inputted by the user..
I have several programs that must write to HKLM in XP and Windows 7/64 Pro.The programs work in VB6 but not in VB.Net 2008 on target machines. It does works on our development machine. [code]I just cannot figure out why VB6 works but .net doesn't and fails only on the target machine not the development machine.
I have a coma seperated text file with loads of records. Usually when we read a text file we start from the first line and go towards the last. I know that there will be x comas per record.
But I want to start reading from the last line and then towards the top. This enables me to stop before I reach the top (depending on the data).
What would be the fastest way to read a text file in VB.NET. I am using VS2008. Basically I want to read from last line and stop when I want. I may not need to read the entire file.
I was unable to find anything in my searches for XML or INI on the forum so i apologize now if this has already been asked and answered before.
I have been searching Google for days now, trying to find information on Reading and Writing XML files. I wish to use them to replace INI files in my programs.
I have been using VB6 for years now, but was able to get a copy of VB.NET 2003 really cheap and so i am trying to learn how to do the things i did in VB6 in VB.NET 2003.
I was able to find code to write to an INI file, but was not able to successfully read from an INI file with any of the code i found.
I have been able to find code to write an XML file, but when i try to update it, it replaces the old file with a new one, and the old settings are missing, instead of the new settings added to it.
i can at least start migrating to VB.NET 2003, or if you read XML and update XML data, i can switch now. Here is the code i have for writing XML.[code...]
i have 5 textboxes in a form. I have a streamwriter that writes all of their text to on text file like this:
Code: Dim xfile As String = Application.StartupPath & "/Set.txt" If File.Exists(xfile) = True Then Dim writex As StreamWriter = New StreamWriter(xfile)
[code]....
I was wondering how to get the text under the each number and place it in the corresponding textbox.
Years ago when coding with VB6 and earlier, I used a file open command to create, read, and write a file that made it easy to store useful information.I believe it was binary and you wrote/read the data to a specific line in the file. When you opened the file with something like notepad, it just showed random ascii chars. When I needed a line of data, I could specify what line to load it from.
I am working on a VB Console Application that takes an Autocad drawing type DWG and converts it to a PDF using a shell command that calls a third party application. In this case, acmecadconverter.exe from www.dwgtool.com. Then the PDF that is created needs a unique watermark, so I call a second application for that called pdftk.exe from www.accesspdf.com/pdftk/.
Everything works as intended, except when I try file names that contain spaces. The file system object does not tolerate spaces in the drawing file name. For instance, the following command gives me a system.io.filenotfoundexception...
I'm currently developing an editor for an AFL management sim.I want to be able to load three or four multidimensional arrays to the program, then save them to the same file. I tried the tutorial on here but got completely muddled up. Why can't it be easy like in VB6 When it was like 10 lines of code tops!
I am writing a program to calculate Pi to several hundred billion decimal places and this will require lots of GB of memory. I wrote a test program in VB2008 that saved the first 16 digits of Pi (without the decimal point) to both a text file and a random access file, just to be sure it was outputting the numbers properly. For reference the first 16 digits of Pi are:
Our program will start with the help of a FileSystemWatcher object. How can we check or the file is total copied, for example the file is 100 Mbyte it take a time it's ready for use. Idea:
Do While True Try N = testForUse(BigFile) If N = 1 Then Exit Do
Reading a .txt file in VB.net. My file path is C:UsersMyLilMulePepeDocumentsVisual Studio 2008Projectscurtain_calls.txt.
This is my line of Dim LoanOptionsFile As String = "C:UsersMyLilMulePepeDocumentsVisual Studio 2008Projectscurtain_calls.txt"
I can read the file when I run the program, but how do I write the file path so that someone else can download my program and file and read the file on their system?
i want to read a character 1 by 1 from a string and a .txt, i know all about stream reader so for the .txt would it be somthing like:textbox1.text = tr.readCharacter.i would prefer to be able to read from a textbox or String array though.
I have a txt file that I need to read into a listview, but I need to read from a specific line in that file. Below is a sample of the txt file to read,
i need to read binary file and in this file found the string and replace it with other one and save the file afterwords. I found many example to read binary, but to find and replace is for me mistery.
Error is coming Registry Access is not allowed.While Opening a Key.
Code: Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click NewDelete("HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun", "Sonia") End Sub
I've had a bit of a look around the net and on the forums but I've yet to find an answer to my question. I've got Visual Basic 2008 Express and I'm trying to write some registry entries, I can write strings fine just using
