i need to read binary file and in this file found the string and replace it with other one and save the file afterwords. I found many example to read binary, but to find and replace is for me mistery.
View 3 RepliesI need to write data to a file, preferably in binary format, but I am unaccustomed with the concept. Where's the easiest place to get the basics? I could come here with a specific need, but I'm at the point right now where I am more willing to work within the confines of keeping it simple.
Here's what I know:
1. how to open a new file
2. how to specify the record length
3. how to close the file
Some specific questions:
Does the record length have to be constant throughout the file?
Can I read the nth record without reading the whole file?
I want to save some data to a binary file, and read it later, as in several strings of data.
My objective:
To save the following things...
1. 3 different strings of data, and be able to easily read them later.
I want to read a string into a binary file. This string is repeated every certain length ... example:
Start Offset: 694
End Offset: 2248591
Long of string: 25
Sequence Length: 110
I want to read the file and add the strings in a listbox.
I'm wounder if it's possible to save both string and images to the same binary file? I know that you can save them independently with one file for strings and one for images. But i would like to save both in to the same file.
If it's not possible with binary files, when what's my options?
How could i read a string into a binary file Encoding.UTF8.(the string has a length of 25 bytes)
Using fs As New FileStream (OpenFileDialog1.FileName, FileMode.Open)
fs.Position = 2096
Using br As New BinaryReader (fs)
For x As Int16 = 2 To 25
[code]....
I'm trying to read the binary data from a binary file with the code below but the it's return the value in the byte array. How can i read the binary data from the binary file and then convert the data into string?This is how i create the binary file.
Dim fs As New FileStream(Application.StartupPath & "Agency.dat", FileMode.OpenOrCreate)
Dim bf As New BinaryFormatter()
Call bf.Serialize(fs, GAgency)[code]....
I've gone through about 16 hours and two packs of cigarettes trying to figure this out. First a little background. I was using 6.0 up until 2004 when I went to prison. I'm out now, and trying to relearn the trade, using VS 2005. I'm currently porting some 6.0 code from another project, SpyCast Webcam Studio, into VB 8.0. It's disheartening, to say the least. None of the old built-in subs/functions work anymore, so I have to scour the forums to relearn each and every function.The section I'm doing now takes a snapshot from the webcam (Video API --> PictureBox --> Save as Jpeg), then upens the file to upload it to the server via HTTP POST. I've been using this code in SpyCast for years with no trouble, but I spent many hours trying to piece together the right code to open the binary file to read its contents. I pieced together two methods I found around the forums, one using FileStream() though the code I found wasn't for binary files, even though it said it was, so that code doesn't really work. Method two uses Microsoft.VisualBasic.FileOpen() and works better.
Here's the kicker. By the time I run through the rest of the rigamarole of uploading the file, by the time I read it on the webserver, it's *slightly* corrupted. It's a valid Jpeg, no errors, but the picture looks like when I use to watch the Playboy Channel when I was a kid scrambled with weird colors and whatnot. [code] Each "chunk" is basically one "line" of the file. It looks like a single LineInput() return is the text between two carriage returns. Am I correct? I tested this with a flat text file, and it looks true. However, That one input line returns the text or data with the carriage returns *stripped*! ***?!? =( Fine, I have no problem adding my own vbCrLf to each LineInput(), if I were opening text. but this's binary. A character could be Chr(10) or Chr(13), both of which are removed from the original file contents.So I could very well need to use something other than LineInput(), but I haven't found any other examples on the web using this method.
Can I save an array into my .bin file then read the array again just like a string or Integer??
View 2 RepliesI want to replace some bytes from a binary file .[code]...
If the value of the textbox is too short I want to replace the remaining bytes for a new value "0"
I a very large text document, I need to read some lines and at the end of each line, insert a text from the header of each page to he preceding lines.I have the following code the reads the file and displays it on a list box.Public Class Dialogs..[code]
View 2 RepliesHow do I read all the text from a text file and save it as a string variable? For some reason I remembered it being something like this: IO.FromFile.ReadAllText("path") but thats not it.
View 3 Repliesbefore i use VB6 i was make multiple file for each settings, i try load my VB6 into VB.NET 2008 and code show like this
Code:
FileOpen(1, My.Application.Info.DirectoryPath & "path.ini", OpenMode.Input)
Input(1, home1)
myWeb(X).Navigate(New System.URI((home1)))
[Code].....
so each form load will read ini file, and form close save ini file
Reading a .txt file in VB.net. My file path is C:UsersMyLilMulePepeDocumentsVisual Studio 2008Projectscurtain_calls.txt.
This is my line of Dim LoanOptionsFile As String = "C:UsersMyLilMulePepeDocumentsVisual Studio 2008Projectscurtain_calls.txt"
I can read the file when I run the program, but how do I write the file path so that someone else can download my program and file and read the file on their system?
I have existent binary files with this structure[code]...
View 13 RepliesI need make an application that gets binary code from a file, such as a .exe, (in 8-bit form) and display the charectors in a RichTextBox .BUT! The catch is I need it to do the process REALLY fast, like in a 5th 0.5 of a second. I have a method but it takes way to like, sometimes 5 seconds for 1 file, which isn't what I want This is the code I have:[CODE]......
View 9 Replieshow can i save 2 textboxes(string) into 1 file? and when open the file, the string goes to definite texboxes...
[Code]...
reading a 16bit binary file (tiff image). Since the file is in 16bit, pixels of the file stores values ranging from 1200 to 4500. I want to retrieve those values. I used ReadUInt16 since the file has a 2byte data type but keep getting EnfofStreamException Unhandled error.
Dim f1 As New System.IO.FileInfo(TextBox2.Text)
fLen1 = f1.Length
Dim snglRead As Single
Dim i As Integer
[code]....
To read a record in a binary file in VB^ I would define a type with all the fields specifying strings as STRING * whatever the length of the field was.
For example:
Type Record
Field1 as string *15
Field2 to as string * 20
Field3 as String * 10
field4 as byte(10)
End Type
Dim filerecord as record
I would the open my binary fiel and do a Get#1,, filerecord
The record would be read and all the fielsd would be in place.
Now with the new Structure we cant dimension an array in the Structure And wjhen declaring strings we can't specify the length.
I tried to create structire and use a stream binary reader. and just read afixed number of bytes into the type, The program says it canvert bytes to my fiels.
So how do I do this. Or has Microsoft in their infinite wisdom left no way to do this.
How do I read a raw byte array from any file...
Dim bytes() as Byte
..and then write that byte array back into a new file?
I need it as a byte array to do some processing in between.
I'm currently using:
To read
Dim fInfo As New FileInfo(dataPath)
Dim numBytes As Long = fInfo.Length
Dim fsAs New FileStream(dataPath, FileMode.Open, FileAccess.Read)
[Code]....
I'm a beginner programmer, but this may not be a beginner program question. I would like to write a program in small basic or visual basic that reads data from a binary file. The data are formatted in hex and look like this:
[Code]...
Im trying to read and write to a file in binary.to give an example of what im trying to do i have posted a picture below.the string is 12 bytes long and each four bytes has a float.the one in red is set at 1 and green and blue are 0 giving the read as the overall color. i have been trying to get this well i tried once and gave up but its been awhile.i have this so far but it doesnt work. this is kinda what i got to read the bytes out but its messed for i have been trying everything i could think of
Code:
Dim s1 As FileStream Dim br As BinaryReader s1 = New FileStream(Application.StartupPath & "/files/test1.bin", FileMode.Open, FileAccess.Read) br = New BinaryReader(s1) Dim bytes(12)
[CODE]...
I have this to write the color back from a color dialog
Code:If dlgColor.ShowDialog() = DialogResult.OK Then
PictureBox1.BackColor = dlgColor.Color()
[CODE]...
I'm trying to save a binary file stored in a SQL database with a SaveDialog, the function RetrieveFile retrieves the specified file from the database as a Byte array, here's what I have so far:
Private Shared Function RetrieveFile(ByVal filename As String) As Byte()
Dim connection As New SqlConnection("Data Source=SERVERSQL2008;Initial Catalog=NorthPole;Integrated Security=True")
Dim command As New SqlCommand("SELECT pcfFile FROM Items WHERE pcfFileName=@Filename", connection)
command.Parameters.AddWithValue("@Filename", filename)
connection.Open()
[Code] .....
Files are saved as "SqlDbType.VarBinary" within the database.
I get: "Index was outside the bounds of the array." on:
Dim retrievedBytes As Long = reader.GetBytes(1, startIndex, buffer, 0, ChunkSize)
The MemoryStream appears to not be retrieving the data yet the SQL syntax is correct.
Join Date: Dec 10
Posts: 10
caba11 is an unknown quantity at this point (<10)
How to save binary file to database. Ineed to save files into database. I cant find why it is not working...
This is my code:
Public Sub importfiles(ByVal sFileName As String)
Dim cnSQL As SqlConnection
Dim cmSQL As SqlCommand
Dim strSQL
'Validate form values
[Code] .....
Without try it says "cmSQL.ExecuteNonQuery()"-"Failed to convert parameter value from a DataGridViewTextBoxColumn to a Int32."
I'm designing a very simple program that will need to save both data and photos to a cd but my code refuses to let me do it. Here is what I have:
FileOpen(1, "E:FileWithData.dat", OpenMode.Binary)
FilePut(1, AString, 10)
I keep getting an incorrect function at FileOpen
I saw some methds which take numerous lines of code but I like to keep my code very simple so I can easily tell what it does.
I'm trying to Save Arabic string on file using file open but every time I load the file it gives me deffrant craters cant read it like "this code workking good In English but in arabic the resulut always like "??????" and cant read it back.
[Code]...
Some binary files have application variables at the end if you open it with a text editor you can see these variables. Now when I read these files into the processor memory the program does not work properly, however if I read a file without this it works fine. So how can I read a byte[] array to EOF so that when I pass that byte array into win32 api create-process it will create the process without corrupting the program?
View 3 RepliesI am using BinaryReader class to read binary file.But I am facing problem while reading number of bytes from it.I have written code to read only 2 bytes from it,it works well on my machine and read only 2 bytes,but when I deployed that code on server machine it read 4 bytes from file.Whats wrong in the code?Is it due to processor i.e.. 32 bit processor/64 bit processor.
View 2 RepliesI have an image that has dimension of (100,100). I am using FileStream class. When I run the code I get EndOfStreamException error at line 44. I have pasted the for loop section of the code below.
For x = 0 To 99
For y = 0 To 99
byteRead1(x, y) = br1.ReadByte ' line 44 (exception thrown here)
[code].....
I used to read a binary file by formatting a record type and then using the Get command to get the data. What is the equivalent in VB.net?
Code:
'In Module.bas
Public Type recordtype
dist As Single
[Code].....