Some binary files have application variables at the end if you open it with a text editor you can see these variables. Now when I read these files into the processor memory the program does not work properly, however if I read a file without this it works fine. So how can I read a byte[] array to EOF so that when I pass that byte array into win32 api create-process it will create the process without corrupting the program?
View 3 RepliesI'm trying to read the binary data from a binary file with the code below but the it's return the value in the byte array. How can i read the binary data from the binary file and then convert the data into string?This is how i create the binary file.
Dim fs As New FileStream(Application.StartupPath & "Agency.dat", FileMode.OpenOrCreate)
Dim bf As New BinaryFormatter()
Call bf.Serialize(fs, GAgency)[code]....
How do I read a raw byte array from any file, and write that byte array back into a new file?
View 3 RepliesI have a device with upon serial communication , it send the data as HEX values , (eg, C020042ABD0F91A103E400F929EBC) . I use the following code to get data from the serial port.
Dim fStream As New FileStream(sFileName, FileMode.CreateNew) ' creates new file
Dim bw As New BinaryWriter(fStream)
System.Threading.Thread.Sleep(1500)
ComTd.Read(data, 1, bCount)
[code]....
I have a device with upon serial communication, it send the data as HEX values, (e.g., C020042ABD0F91A103E400F929EBC). I use the following code to get data from the serial port.
Dim fStream As New FileStream(sFileName, FileMode.CreateNew) ' creates new file
Dim bw As New BinaryWriter(fStream)
System.Threading.Thread.Sleep(1500)
ComTd.Read(data, 1, bCount)
Dim bCount As Integer = 4119 ' it is the size of the chunk not block size
Dim data(bCount) As Byte
[Code] .....
Can I save an array into my .bin file then read the array again just like a string or Integer??
View 2 RepliesIs there any special way of reading a pdf file into a byte array? The reason I ask...I want to fax a pdf file using faxDocument and FaxServer. My current code is working fine for everything else. Now I know that in the documention it says it should not work for pdf. But I can get some pdfs to send and some do not. When I fax a pdf through windows, it works. [code]....
View 5 RepliesI have a DEM file(Digital Elevattion Model File) and I am trying to open the file,where we have Latitude and Longitude values inside the DEM file.And, Now I have opened the file using Filestream and Read the file using BinaryReader.But, I am having a trobule in getting the values of Latitude and Longitude.I am getting Byte values randomly as 1,202,31,271 etc.But, we dont have latitude and longitude values more than 180,and also I am not getting 16 bit UInt values.For example, the values should be like Latitude 20.00416666666667 and Longitude 39.99583333333333.So,read the correct Byte values of the DEM file.The code I have used till now is:
Dim fs As FileStream = New FileStream("C:UsersadminDesktopHeader and DEM fileE020N40.DEM", FileMode.Open, FileAccess.Read)
Dim rd As New BinaryReader(fs)
Dim convertDB As UInt16
For i = 0 To rd.BaseStream.Length
[code]....
I have an image that has dimension of (100,100). I am using FileStream class. When I run the code I get EndOfStreamException error at line 44. I have pasted the for loop section of the code below.
For x = 0 To 99
For y = 0 To 99
byteRead1(x, y) = br1.ReadByte ' line 44 (exception thrown here)
[code].....
Objective: Combine byte arrays, read specific sections, and then cut byte array at specified point.
Private Sub DataArrival(ByRef aBot As xyzSocket, ByRef theData As Byte())
Dim RDLength As Int32
If aBot.ReceivedData Is Nothing Then[code]....
I'm not sure if I have this right to begin with because I can't test it without having it completed.
I'm trying to save binary data ( convert from image) to byte array in mifare card with acr 120 reader.
image : 687 byte
mifare : 1 k
My problem its can't save but I am trying to save char data its work.
i have a table in sql server with some fields set as Byte() (System.Byte[]) when i import them in my application to be used with linq they are converted in Binary (System.Data.Linq.Binary)why is that?is there a way to prevent this wrong translaton???if i update the database how can i update the classes that has been craeted in visual studio2008?
View 2 RepliesI have a client and server: I cant get the server to extract the byte sent to it.
Server:
Imports System.Net.Sockets
Imports System.Threading
Imports System.IO
Imports System.Net
[Code]...
Im working on a FTP Server (File Transfer Protocol) where i can download files.The problem occoured when i was about to download a 4BG large file from the server when i only had 3GB RAM on the server computer and the function to read the binary files was " data = File. ReadAllBytes("Files File001.7z") "... so how do i split the binary file into smaller byte blocks like 1MB?I've been trying this which seems to have been a total failure.[code]
View 11 RepliesI have a client(VB.Net) that receives a packet from the server(Java), and for a while I struggled with some really weird packets that didn't make any sense, eventually took a look at the Java servers source and saw packet structures like this...
[code]...
and so I came across the term of bit-masking. After a few failed attempts and unsatisfying google searches later, here we are.In short, I need to read a byte array bit by bit.
I am trying to achieve a drag and drop of outlook emails to my vb app. I found this thread which is very helpful
[url]...
the op shows how to get the FileName returned as well as a byte array which contains other data about the email message.
How can I read the byte array and get out the other information about the email message?
I must search a binary string for a pattern. This worked fine in VB6 using Get to read a file into a string and using InStr to search for the pattern. The conversion from VB6 to VB.NET changed Get to FileGet and warned of new behavior, but I don't see anything in the FileGet documentation about not being able to read 0 value bytes.
I don't mind at all changing to a new method, but ultimately I must get the data into a string rather than an array.
[Code]...
I'm trying to read a byte array into a string however it's array is filling up from a dll in the following format. [Code] now its decoding the first byte but I think because of the next [0] it's not completing the whole array. This is the code that I'm using:
Radiotext = System.Text.Encoding.ASCII.GetString(szRetRDS)
I did think about writing it into another byte array excluding the [0] but unsure how I would go about this.
I try to read a stream and save it as byte array to add it later to zip file.this is the code that I use
Dim totalbytes As Byte() = Nothing
Dim iBytesRead As Integer
Dim sChunks As FileStream = File.OpenRead("c:myfile.wav")
Dim Totalread As Int64 = 0
[code]....
but there is something is not correct,
Is it possible to read perhaps the first 150/300 bytes of a byte array without having to copy the array to another array of proper size.[cod]e...
View 3 RepliesI have a byte array and I want to read it using a structure. This is a common situation with structured files having information in various places in the file and it's much easier to read the data if it's mapped with a structure. BitConverter would be great if it worked with Structures, but it doesn't. Basically, I want to read the same memory address either as a byte array or as a structure, or have a function that works like
vb.net
MyStructure = BitConverter.ToStructure(bytearray(), position)
Maybe there's a pointer method to do this?
I need to create a collection of millions of objects, each object has 3 double and one integer fields.If I remember (after more than 20 years without using C) in C you would allocate enough memory using a struct and an array, and read all the file content in one shot.In VB I created a class with the 4 members, and this constructor:
Sub New(BR As IO.BinaryReader)
X = BR.ReadDouble
Y = BR.ReadDouble
[code]....
How would I copy/convert a string containing an ascii representation of hex values in to a byte array containing the actual hex values? For example, I have a variable containing the hex values delimited by spaces (I can change the delimiter):
[Code]...
I'm trying to get a string from a byte array previously read from memory
i can get the string like this
dim mem as string= ASCIIEncoding.ASCII.GetString(memory) or dim mem as string= UTF8Encoding.UTF8.GetString(memory) but when i try to concatenate this with another string i get a strange result dim result as string = "this is you memory string " & mem & " problem string" no matter what comes after mem in the concatenation it seems like it is not there when in fact it is because when i try this (mem has two chars in it) dim result as string = "this is you memory string " & mem(0) & mem(1) & " problem string" problem string appears so what i assume is that there are some vbCrLf chars in the string after reading (or is it from the conversion?)
i need to read binary file and in this file found the string and replace it with other one and save the file afterwords. I found many example to read binary, but to find and replace is for me mistery.
View 3 RepliesI need to write data to a file, preferably in binary format, but I am unaccustomed with the concept. Where's the easiest place to get the basics? I could come here with a specific need, but I'm at the point right now where I am more willing to work within the confines of keeping it simple.
Here's what I know:
1. how to open a new file
2. how to specify the record length
3. how to close the file
Some specific questions:
Does the record length have to be constant throughout the file?
Can I read the nth record without reading the whole file?
I have existent binary files with this structure[code]...
View 13 RepliesI need make an application that gets binary code from a file, such as a .exe, (in 8-bit form) and display the charectors in a RichTextBox .BUT! The catch is I need it to do the process REALLY fast, like in a 5th 0.5 of a second. I have a method but it takes way to like, sometimes 5 seconds for 1 file, which isn't what I want This is the code I have:[CODE]......
View 9 RepliesI've gone through about 16 hours and two packs of cigarettes trying to figure this out. First a little background. I was using 6.0 up until 2004 when I went to prison. I'm out now, and trying to relearn the trade, using VS 2005. I'm currently porting some 6.0 code from another project, SpyCast Webcam Studio, into VB 8.0. It's disheartening, to say the least. None of the old built-in subs/functions work anymore, so I have to scour the forums to relearn each and every function.The section I'm doing now takes a snapshot from the webcam (Video API --> PictureBox --> Save as Jpeg), then upens the file to upload it to the server via HTTP POST. I've been using this code in SpyCast for years with no trouble, but I spent many hours trying to piece together the right code to open the binary file to read its contents. I pieced together two methods I found around the forums, one using FileStream() though the code I found wasn't for binary files, even though it said it was, so that code doesn't really work. Method two uses Microsoft.VisualBasic.FileOpen() and works better.
Here's the kicker. By the time I run through the rest of the rigamarole of uploading the file, by the time I read it on the webserver, it's *slightly* corrupted. It's a valid Jpeg, no errors, but the picture looks like when I use to watch the Playboy Channel when I was a kid scrambled with weird colors and whatnot. [code] Each "chunk" is basically one "line" of the file. It looks like a single LineInput() return is the text between two carriage returns. Am I correct? I tested this with a flat text file, and it looks true. However, That one input line returns the text or data with the carriage returns *stripped*! ***?!? =( Fine, I have no problem adding my own vbCrLf to each LineInput(), if I were opening text. but this's binary. A character could be Chr(10) or Chr(13), both of which are removed from the original file contents.So I could very well need to use something other than LineInput(), but I haven't found any other examples on the web using this method.
reading a 16bit binary file (tiff image). Since the file is in 16bit, pixels of the file stores values ranging from 1200 to 4500. I want to retrieve those values. I used ReadUInt16 since the file has a 2byte data type but keep getting EnfofStreamException Unhandled error.
Dim f1 As New System.IO.FileInfo(TextBox2.Text)
fLen1 = f1.Length
Dim snglRead As Single
Dim i As Integer
[code]....