i have a table in sql server with some fields set as Byte() (System.Byte[]) when i import them in my application to be used with linq they are converted in Binary (System.Data.Linq.Binary)why is that?is there a way to prevent this wrong translaton???if i update the database how can i update the classes that has been craeted in visual studio2008?
View 2 RepliesI cannot get the following to work for me: its the section that sets the default for system.data.linq.binary. The database I work with doesn't allow nulls in any field. So I generally run my buffer through this routine to populate defaults and then set the real values independently, (this works when I miss a field). I can set the Linq table field = fakeBinary and it works like a charm. Thus, I don't understand why using reflection can't pull of the same thing.
Ex: Me.CM20500WindowBuffer.Reconcile_Messages = New Byte() {0} works.
Try
Dim fakeBinary As System.Byte() = {0}
For Each fld In nObj.GetType().GetProperties
Select Case fld.PropertyType
Case GetType(Byte)
[Code] .....
I'm trying to save binary data ( convert from image) to byte array in mifare card with acr 120 reader.
image : 687 byte
mifare : 1 k
My problem its can't save but I am trying to save char data its work.
I don't understand that error that occurs on the second line of code below. I'm trying to skip over the first 18 bytes of a byte array that I'm accessing from a c# dll into a local vb.net byte array
View 3 RepliesIs there a way to convert byte values to binary so i can read the values from the bits themselves? I have some byte whose values are 00 09 and I'd like to convert the values to bits to be like this : 0000 0000 0000 1001. Then I'd like to read the value of first 2 bits and the remaining 14 bits separately.
View 10 RepliesSome binary files have application variables at the end if you open it with a text editor you can see these variables. Now when I read these files into the processor memory the program does not work properly, however if I read a file without this it works fine. So how can I read a byte[] array to EOF so that when I pass that byte array into win32 api create-process it will create the process without corrupting the program?
View 3 RepliesI have a language that generally contains serialised data messages in a human-readable format, but some productions within the language contain verbatim raw, binary data.My parser uses String for its buffer since that seems to be the easiest thing to work with. However the data is read from a network socket into an array of Byte.
Now, I'm trying to connect the dots between Byte() and String:
[Code]...
But my data is still mangled. I haven't actually been able to deduce yet precisely how the data is being mangled, but I do know that the length of the data is changing, indicating that the bytes are not being left verbatim.
So how can I obtain a String whose contents are just a verbatim copy of the bytes from my Bytes() input?
Im working on a FTP Server (File Transfer Protocol) where i can download files.The problem occoured when i was about to download a 4BG large file from the server when i only had 3GB RAM on the server computer and the function to read the binary files was " data = File. ReadAllBytes("Files File001.7z") "... so how do i split the binary file into smaller byte blocks like 1MB?I've been trying this which seems to have been a total failure.[code]
View 11 RepliesI need to read a binary file. The Byte-Ordering in this file is different from the Intel-Standard. In good old FORTRAN I've used Equivalence-Statement in such cases (For example Defining a 4-Byte-Integer-variable and 4 Bytes at the same memory location / read the file as bytes / store them in the neccessary order / access the memory using the Integer-Variable). In VB dotnet I programmed a solution using shift-operators:
[Code]...
I have a device with upon serial communication , it send the data as HEX values , (eg, C020042ABD0F91A103E400F929EBC) . I use the following code to get data from the serial port.
Dim fStream As New FileStream(sFileName, FileMode.CreateNew) ' creates new file
Dim bw As New BinaryWriter(fStream)
System.Threading.Thread.Sleep(1500)
ComTd.Read(data, 1, bCount)
[code]....
I have a device with upon serial communication, it send the data as HEX values, (e.g., C020042ABD0F91A103E400F929EBC). I use the following code to get data from the serial port.
Dim fStream As New FileStream(sFileName, FileMode.CreateNew) ' creates new file
Dim bw As New BinaryWriter(fStream)
System.Threading.Thread.Sleep(1500)
ComTd.Read(data, 1, bCount)
Dim bCount As Integer = 4119 ' it is the size of the chunk not block size
Dim data(bCount) As Byte
[Code] .....
I must search a binary string for a pattern. This worked fine in VB6 using Get to read a file into a string and using InStr to search for the pattern. The conversion from VB6 to VB.NET changed Get to FileGet and warned of new behavior, but I don't see anything in the FileGet documentation about not being able to read 0 value bytes.
I don't mind at all changing to a new method, but ultimately I must get the data into a string rather than an array.
[Code]...
I'm trying to read the binary data from a binary file with the code below but the it's return the value in the byte array. How can i read the binary data from the binary file and then convert the data into string?This is how i create the binary file.
Dim fs As New FileStream(Application.StartupPath & "Agency.dat", FileMode.OpenOrCreate)
Dim bf As New BinaryFormatter()
Call bf.Serialize(fs, GAgency)[code]....
I realize the code listed below, whose serial port using string formatting which I inherited is complicated. It formats a Date obtained from a DatePicker control into a "yyyy-MM-dd HH:mm:ss" string format to send to a hardware device to be stored via Serial Port retrieves the date from the device and displays to user What I'm trying to do is port the code for use in a Socket rather than Serial Port which wants a Byte Arrray of the same Date Time string variable. I can't figure out how to encode and convert to Bytes the string value used in the Serial Port version. The evolution of the process is listed from top to bottom.
[Code]...
Subsonic 2.2 is throwing the error
subsonic Invalid cast from System.Int32 to System.Byte[]
When I do the following
If template.Content Is Nothing Then
MsgBox("Blank Document")
Else
MsgBox("Document Present")
End If
"template" is a SubSonic object of which it's "content" field is of type Byte()
Now I want to display picture in picturebox1.To do this I use this codes, but it does not display picture
on this line: Dim arrPicture() As Byte = CType(dt2.Rows(0)("img_path"), Byte())
it shows this message,
Unable to cast object of type 'System.DBNull' to type 'System.Byte[]'.[code]......
I have a DEM file(Digital Elevattion Model File) and I am trying to open the file,where we have Latitude and Longitude values inside the DEM file.And, Now I have opened the file using Filestream and Read the file using BinaryReader.But, I am having a trobule in getting the values of Latitude and Longitude.I am getting Byte values randomly as 1,202,31,271 etc.But, we dont have latitude and longitude values more than 180,and also I am not getting 16 bit UInt values.For example, the values should be like Latitude 20.00416666666667 and Longitude 39.99583333333333.So,read the correct Byte values of the DEM file.The code I have used till now is:
Dim fs As FileStream = New FileStream("C:UsersadminDesktopHeader and DEM fileE020N40.DEM", FileMode.Open, FileAccess.Read)
Dim rd As New BinaryReader(fs)
Dim convertDB As UInt16
For i = 0 To rd.BaseStream.Length
[code]....
I've been trying to figure this out for hours now, and I've given up on trying to solve it myself. Basically what I need to do, is convert a "double octet" binary string, such as "11010011 01011101", into a byte or char type if possible.I use the following code to convert my Unicode text into binary:
Private Function ByteToStr(ByVal bt() As Byte) As String
Dim st As New StringBuilder
For Each byt As Byte In bt
[code]....
But that gives me weird results. The "Convert.FromBase64String" obviously isn't what I'm after. Any help would be great. If I can convert the "binary string" into a bytes or chars I can get it into a string.
I've been trying to figure this out for hours now, and I've given up on trying to solve it myself. Basically what I need to do, is convert a "double octet" binary string, such as "11010011 01011101", into a byte or char type if possible. I use the following code to convert my Unicode text into binary:
[Code]...
I am using VB2008 in VS Prof and try to convert at Byte arry stored as a Image format in Sql2000 database.
Code:
Using acnLoc As New SqlConnection(CSLoc)
acnLoc.Open()
Dim G As SqlCommand = New SqlCommand("SELECT [SignatureData] FROM [MyTable] where [OID]=@OID", acnLoc)
G.Parameters.Add("@OID", SqlDbType.Int).Value =Cint(bxShipmentno.Text.Trim())
dim P= G.ExecuteScalar() 'returns a system arry
[Code]...
i get the error in following code
Function ReadFile(ByVal sPath As String) As Byte
Dim data As Byte
data = Nothing
[Code].....
I has the following code in my vb.net:
Code: Dim sql2 As String = " SELECT * FROM Etiqa_Image_Details where TransmissionID='" & Request("id") & "' " With objDB.OpenDataReader(sql2) While .Read()
If .Item("ImageType") = "Invoice" Then imgInv.ImageUrl =
[code]....
However,i get this error while retrieving the image path(Varchar in sql server 2000) and display the image on the web.
Unable to cast object of type 'System.String' to type 'System.Byte[]'.
Actually in my database, i am just storing the image path where the image store...And now when I browsing the web, it should get the image path out and find the image through the image path and then display on the web....
Why does C# define Byte+Byte=Int32 instead of Byte+Byte=Byte like VB?
View 1 RepliesI was given a school project in which I have to make a program that converts numbers between binary,decimal,octal and hexadecimal systems. I have figured out how to make a function to convert binary number to decimal number [code]With this code,a user can enter a number that isn't binary,and program will calculate it. How can I make that program doesn't calculate those numbers or doesn't accept anything else than 0 or 1? This is needed for other cases like octal and hexadecimal system.
View 3 RepliesHow can I convert an object of type System.Data.Linq.DataQuery to System.Linq.IQueryable?I'm working with Visual Basic/Silverlight, and the source code of my query is as follows:
Public Function Get_Cli_Pag() As IQueryable(Of V_Cliente_Pagare)
Dim Qry = From P In Me.Context.Pagares Join C In Me.Context.Codigos On C.Codigo
[code]....
Is it possible in VB to truncate a larger data type ( an int with a value greater than 255) to a smaller one, say a Byte (which only goes up to 255) in a way such that the 8LSBs of the integer are copied to the newly created byte. I have tried this using CType with the following code, however it does not work.
Dim TestByte As Byte = CType(Test, Byte)
Where the variable "Test" is an integer with a value of 419. This code always results in the Overflow exception.
[code].....
I am storing images in a database. When I call the function to get a picture it returns an array of system.byte[]. How do I convert this to an image?I've searched for information, and found this page among others. But the code given doesn't work for me.
'Byte[] to image
imgMemoryStream = New IO.MemoryStream(imgByteArray)
myImage = Drawing.Image.FromStream(imgMemoryStream)
[code].....
Can anyone help me to break down the instructions for this assignment.Create an application that allows the user to type in a 32 bit number using the binary system, and convert that number into the decimal numbering system.For example, the user types 000000000000 0010 (where there are 30 leading 0's, 1 then 0 from left to right), and the output would be 2.The user will type a string that is 32 characters in length.A For loop 'reads' each character using the x.substring(i,1) where i is the current character we are reading and 1 means one character only,and x is the entry the user typed (use a Textbox to get the entry but Inputbox is also ok).When you start at the first character (from the right) then that value is to be * 2 ^ 0 then the second character is to be * 2 ^ 1, then the third character is * 2 ^ 2, hence:( x.substring(i,1) converted to Integer ) * 2 ^ j represents the decimal value of the current number (0 or 1) we are reading.A variable is needed to accumulate all those values.After the loop is done, display the accumulated value.To test this code on a simple version, enter a 4 digit binary number, where 0010 is decimal 2, 0110 is decimal 6, 0111 is 7, and 1000 is 8.
My understanding is the user must enter 32 digits into a textbox. The textbox should place limitations that only allow the digits "0" and "1". This error could be displayed to the user with a messagebox that then asks to reset the value orginally inputted into the textbox. My understanding is I should continue creating the formula of the position of each character where the third character is *2^2, fourth is *2^3, fifth is *2^4 and so on? I don't understand the formula and how it works.
I have been googling this and have not come along a working solution for an entire day. I don't know anything about binary data types (as I've never knowingly used them) and I'm trying to write a binary value that I see in the registry, to the registry. Now, all I see is the following [shown below]... and if I try to pass that as a string to the RegSetValueEx in the WinAPI and of course it errors out...
I do not know what 'numbers' I need to pass into the lpData As Any, argument of RegSetValueEx (i tried a bit array) in order for it to come out as the following [shown below] in the regedit. I really have no idea, and my tests to place random numbers in the bit array just produce corresponding random "figures" as visible in regedit that I do not understand how to 'tie' them together logically. here is the culprit!
[Code]...
I wrote some software in Vb6 a long while ago and this program creates a datafile. This datafile stores variables like doubles, ints, arrays etc, using the Get/Put methods from VB6. This all worked great for vb6.I am now starting to rewrite this tool in .net and find that the binaryreader as well as the other fileopen methods do not convert the doubles correctly. So as I rewrite the software I still want to read the old datafiles just like before.if I use a byte array and read 8 bytes, the bytes read are identical in Vb6 and vb.net. We are talking about reading an existing old binary file created by vb6.
for example the number 3, stored as a double has a 8 byte array that looks like this:
[0][0][0][0][0][0][0][5] in vb6.
in vb.net if you use the bitconverter.getbytes(cdbl(3)) you get
[0][0][0][0][0][0][8]64]
in vb6 the first array is converted to the # 3 correctly.in vb.net the array is converted to something way way off.