How would I copy/convert a string containing an ascii representation of hex values in to a byte array containing the actual hex values? For example, I have a variable containing the hex values delimited by spaces (I can change the delimiter):
[Code]...
way to convert byte array to ascii string?
View 3 RepliesThis illustrates a series of bytes that I've received from a socket and assigned into a byte array (frameData). How do I extract the ascii string from frameData if FrameData.Length is 79 bytes long and I need to extract the byte locations whose begin -frameData(26) and end frameData(44) are given by the arrows I've drawn?
View 3 RepliesHow to correctly convert string containing upper ASCII characters to byte array besides looping through each character and filling the array using AscW(chr)?I know I can do something like:
Code:
Dim bSourceData As Byte() = System.Text.ASCIIEncoding.GetBytes(sourcedata)
But this only works for lower ascii characters (0-127).Instead of ASCIIEncoding I can specify encoding myself (System.Text.Encoding.Getencoding(encoding).GetBytes(sourcedata)). But I have to specify correct encoding in this case, otherwise most of special characters are converted to "?". What should I do if I don't know the encoding?
I'm trying to read a byte array into a string however it's array is filling up from a dll in the following format. [Code] now its decoding the first byte but I think because of the next [0] it's not completing the whole array. This is the code that I'm using:
Radiotext = System.Text.Encoding.ASCII.GetString(szRetRDS)
I did think about writing it into another byte array excluding the [0] but unsure how I would go about this.
I'm trying to read the binary data from a binary file with the code below but the it's return the value in the byte array. How can i read the binary data from the binary file and then convert the data into string?This is how i create the binary file.
Dim fs As New FileStream(Application.StartupPath & "Agency.dat", FileMode.OpenOrCreate)
Dim bf As New BinaryFormatter()
Call bf.Serialize(fs, GAgency)[code]....
I'm trying to get a string from a byte array previously read from memory
i can get the string like this
dim mem as string= ASCIIEncoding.ASCII.GetString(memory) or dim mem as string= UTF8Encoding.UTF8.GetString(memory) but when i try to concatenate this with another string i get a strange result dim result as string = "this is you memory string " & mem & " problem string" no matter what comes after mem in the concatenation it seems like it is not there when in fact it is because when i try this (mem has two chars in it) dim result as string = "this is you memory string " & mem(0) & mem(1) & " problem string" problem string appears so what i assume is that there are some vbCrLf chars in the string after reading (or is it from the conversion?)
What do i need to do to convert a recieved byte from Ascii to String, so i could display it properly on a textbox?
View 16 RepliesObjective: Combine byte arrays, read specific sections, and then cut byte array at specified point.
Private Sub DataArrival(ByRef aBot As xyzSocket, ByRef theData As Byte())
Dim RDLength As Int32
If aBot.ReceivedData Is Nothing Then[code]....
I'm not sure if I have this right to begin with because I can't test it without having it completed.
I need to get ASCII Values into an array that I have setup. The code is written as follows:
Dim aStr As String = TextBox1.Text
Dim aStrBytes() As Byte = New Byte() {}
aStrBytes = System.Text.Encoding.ASCII.GetBytes(aStr)
ReDim IntialValue(0 To 1000)
I have a DEM file(Digital Elevattion Model File) and I am trying to open the file,where we have Latitude and Longitude values inside the DEM file.And, Now I have opened the file using Filestream and Read the file using BinaryReader.But, I am having a trobule in getting the values of Latitude and Longitude.I am getting Byte values randomly as 1,202,31,271 etc.But, we dont have latitude and longitude values more than 180,and also I am not getting 16 bit UInt values.For example, the values should be like Latitude 20.00416666666667 and Longitude 39.99583333333333.So,read the correct Byte values of the DEM file.The code I have used till now is:
Dim fs As FileStream = New FileStream("C:UsersadminDesktopHeader and DEM fileE020N40.DEM", FileMode.Open, FileAccess.Read)
Dim rd As New BinaryReader(fs)
Dim convertDB As UInt16
For i = 0 To rd.BaseStream.Length
[code]....
How do I read a raw byte array from any file, and write that byte array back into a new file?
View 3 RepliesI have a byte array that I convert into a string like so Dim byt As Byte() = New Byte(255) {} s = New String(Encoding.ASCII.GetChars(byte))My question is when I look at the string in a debuger its clearly a normal string but when I compare it to what I know its supposed to be it doesnt equal. So i did a quick check and for some reason its return a string thats the length of 256 characters. So i did a s.trim and it still is 256 characters long.
View 1 RepliesA c# class's single dimension byte array contains socket level instrument sensor data as per:
public static byte[] frameData
I need some thought input on how I can take my string of HEX values and convert them to ASCII according to the specifications below: A function would be ideal since I need to quickly decode about 250 records all having 20 thresholds to record.[code]
View 14 RepliesI have a client(VB.Net) that receives a packet from the server(Java), and for a while I struggled with some really weird packets that didn't make any sense, eventually took a look at the Java servers source and saw packet structures like this...
[code]...
and so I came across the term of bit-masking. After a few failed attempts and unsatisfying google searches later, here we are.In short, I need to read a byte array bit by bit.
I am trying to achieve a drag and drop of outlook emails to my vb app. I found this thread which is very helpful
[url]...
the op shows how to get the FileName returned as well as a byte array which contains other data about the email message.
How can I read the byte array and get out the other information about the email message?
Is there any special way of reading a pdf file into a byte array? The reason I ask...I want to fax a pdf file using faxDocument and FaxServer. My current code is working fine for everything else. Now I know that in the documention it says it should not work for pdf. But I can get some pdfs to send and some do not. When I fax a pdf through windows, it works. [code]....
View 5 RepliesI'm trying to convert old code to VB in VS2005. The code I'm working on is used to store values in a string, which will then be handed to a proprietary scramble function. This function is a given in this case. I've already switched from a string to an array of bytes in my .NET code.
The old code (VBA) was using a string value to store the data, example function for Double value:
Private Function DoubleToStr(ByVal value As Double) As String
Dim Bytes(7) As Byte ' 0-7 Double is 8 bytes
Dim n As Long
CopyMemory(Bytes(0), value, 8)
DoubleToStr = ""
For n = 0 To UBound(Bytes)
DoubleToStr = DoubleToStr & Chr(Bytes(n))
Next n
End Function
The code basically copies the memory contents (using API call CopyMemory) of the memory (held by the double variable) to the memory held by a byte array. It then reads the byte array and converts it into a string. Workarounds could be to convert a bool or long to a string, though that would be expensive in terms of memory/storage eg. 1234564787 would be 10 bytes in a string where as a long is only 4 bytes (factor 2.5 increase).
How to retain the original precision? Converting it to a string would result in endless numbers. Another problem (at least I think it could be) is that in VBA the variables are rather simple, but in .NET they are all objects, so how to retrieve the actual memory location of the value? let alone garbage collection moving stuff around. How to get those variables stored in my byte array?
Some binary files have application variables at the end if you open it with a text editor you can see these variables. Now when I read these files into the processor memory the program does not work properly, however if I read a file without this it works fine. So how can I read a byte[] array to EOF so that when I pass that byte array into win32 api create-process it will create the process without corrupting the program?
View 3 RepliesI try to read a stream and save it as byte array to add it later to zip file.this is the code that I use
Dim totalbytes As Byte() = Nothing
Dim iBytesRead As Integer
Dim sChunks As FileStream = File.OpenRead("c:myfile.wav")
Dim Totalread As Int64 = 0
[code]....
but there is something is not correct,
Is it possible to read perhaps the first 150/300 bytes of a byte array without having to copy the array to another array of proper size.[cod]e...
View 3 RepliesI have a byte array and I want to read it using a structure. This is a common situation with structured files having information in various places in the file and it's much easier to read the data if it's mapped with a structure. BitConverter would be great if it worked with Structures, but it doesn't. Basically, I want to read the same memory address either as a byte array or as a structure, or have a function that works like
vb.net
MyStructure = BitConverter.ToStructure(bytearray(), position)
Maybe there's a pointer method to do this?
I am reading some values from a Byte Array ,i am confused with the Offset
[Code]...
I need to convert hex values aa 01 00 17 f4 2f (as contained in byte array FrameData) to display in a label control as AA:01:00:17:F4:2F
HexDump(FrameData(2)) converts the aa (which has been converted to Decimal 170) into 31 37 30 !
similarly I need to convert hex data ('02 00' contained in byte array FrameData) as
0x0200."0x" & FrameData(1) + FrameData(2) displays the data as 0x20. How would I convert the '02 00' hex data to display as 0x0200?
I have split a string into a char array, now i need to copy the char array to an int array with the ASCII values of each char.Donīt know how to do it without looping each value.
This is my code:
origen = RichTextBox1.Text.ToString
Dim valor As Char() = origen.ToCharArray
Dim numeros As Integer() = (How can i convert "valor" to an int array?????)
I have a device with upon serial communication , it send the data as HEX values , (eg, C020042ABD0F91A103E400F929EBC) . I use the following code to get data from the serial port.
Dim fStream As New FileStream(sFileName, FileMode.CreateNew) ' creates new file
Dim bw As New BinaryWriter(fStream)
System.Threading.Thread.Sleep(1500)
ComTd.Read(data, 1, bCount)
[code]....
I have a device with upon serial communication, it send the data as HEX values, (e.g., C020042ABD0F91A103E400F929EBC). I use the following code to get data from the serial port.
Dim fStream As New FileStream(sFileName, FileMode.CreateNew) ' creates new file
Dim bw As New BinaryWriter(fStream)
System.Threading.Thread.Sleep(1500)
ComTd.Read(data, 1, bCount)
Dim bCount As Integer = 4119 ' it is the size of the chunk not block size
Dim data(bCount) As Byte
[Code] .....
I have an array defined As string and the value stored in site is like "7E", "A1" and so on. But in order to send out this array through serial port. I need to change the the array to As Byte instead of using As String. How can I convert it?
View 8 RepliesI'm trying to make an application that can read a 12 byte hex string from the serial port and display it into a text box, the source is a RFID module that is connected to my USB port using a RS232-USB converter.My first problem was accessing the text box in the datarecieved event due to invalid cross-threaded operation. Upon googling that, I copy/pasted the code I needed to get it work, these are all the cross threading functions.The OpenPort function and Datarecieved event are my own code, the rest I got off google. The application then worked, but I would get an incomplete code, the first swipe I would get all 12 digits, and at every other swipe, the first byte would vanish. Upon some more reading, I decided to make an array, the size of the incoming data (shown in the code below), but now I get the cross-threading error again.I know there's something wrong with the way I'm using the array. This is way beyond my VB knowledge, and I'm in o I'm an electronics engineer and self taught myself a little programming to create some apps for my hardware.Updated code:
Public Class Form3
Dim msg As String
Private Sub Form3_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles
[code]....