I have basic text report (.txt) that is created by a custom application. My client would like it to page break at a certain spot.
Does anyone have a routine that would allow me to insert PCL code into the file so that when printed it page breaks? I'd search for certain text and then insert the codes just prior to the text.
Certainly if someone has a better "mousetrap" then let me know.
I'm using Report Viewer(VS 2008) to make a report in VB.net. I add Table with Table Header, Table Detail, and Table Footer. Then insert a Table Group(table1_group1) and add expression =IntRowNumber Nothing-1/10 on that group. I check page breaks at end.
But when I click Print Layout Icon its show an extra page(page 3): page 1 : page header+ table header + table detail(10 list data) + page footer page 2 : page header+ table header + table detail(5 list data) + page footer page 3 : page header + table footer + page footer ( this is the error)
I also try to print the report and its print 3 page.
I need to implement a routine to read a plain text file, BUT that file has a predefined format.The file format is as follows:
Quote:
<FILE_PROPERTIES> 'The "< >" also appears Propertie1="String" 'It's possible to have spaces after or before the "=" Propertie2="String" Propertie3="String" PropertieN="String"
[code]....
Is there any Windows API Routine to read something like that?Or could you point me an URL where something is implemented?I don't want a procedure to read the file line by line and comparing them with Line Input because blank spaces, empty lines and comments starting with " // " may appear too, and I don't want to take them into account, but also I need to save changes to the file, but only to the modified section, without having to read the whole file, and re-write it completely.
Binary access can't work, because I don't know what's the size of each "section", since the number of elements into it can change. I need something like the "ReadINI" Windows API Procedure, but allowing me to read the "[XXX]" sections headers, and also the "<XXX>" file title header.
I have written a text editor for an assignment but I am struggling on where to start on this bit. What I Want To Happen:- When the user saves there work I want the name of the file to be shown next to the name of the program at the top left hand side of the form. I am not sure If I just need to create a simple sub routine for adding the name of the file then calling the method in the save as routine.
Im working on a somewhat major program for my work. Just in short, im reading in a text file but i then want it to break the text file into blocks. I will put a quick snip of it here:
So i figured id see what the pros could tell me. I have a couple good links, one for a regex cheat sheet but i just dont have a very good understanding of regex.
Using your RichTextBoxPrintCtrl class, is there a way to set a Page Break? Could code be added that if a certain string of characters were detected, A Page Break would be sent by the class?
I'm printing a multi page document with PrintDocument() and I need to be able to force a page break from within my code. I've tried adding vbFormFeed at the appropriate spot but it's ignored.
Is there any way to embed something into my page buffer so that it will force a page break?
I'm writing code for an output using streamwriter. The output is to a .doc file. Is there any way to programmatically add a page break? I've googled it and haven't found anything useful yet.
I have some code to write lines to the printer, if required it should force a page break.Here it should print "1"-"51" on page 1, then "52" - "55" and "The End" on page 2.Instead it prints the second page on top of the first page.How do I get the page break?
Private Sub PrintDocument1_PrintPage(ByVal sender As System.Object, ByVal e As System.Drawing.Printing.PrintPageEventArgs) Handles PrintDocument1.PrintPage Dim i As Short
I have a vb .net program that exports information to certain fields of an excel workbook using named ranges. One of the named ranges is a notes section that gets cut off (not visible nor gets printed) if it extends beyond a page break. I am looking for a way to dynamically create new named ranges to accommodate all of the notes' text.[code]....
I want to achieve the same thing as highlighted in attached file, so called seperator or page break, but i'm unable to find this control in VS 2005, how to get this control?
I'm using Visual Studio 2005 and writing in VB.NET.I have a subreport in a Crystal Reports report consisting of a list of log entries. Sometimes the list of log entries is long enough that it would extend onto the next page. What I see happening is that the list appears on the next page, leaving a big blank space at the bottom of the first page.
I've tried unchecking the "Keep Together" boxes in the "Experts" in a number of different places (sections, groups, etc.) but see no change in the output.I'm guessing that this isn't the right way to go, but do you know what is?
I am trying to build a report from vb.net, and here is
Dim oWord As Word.Application Dim oDoc As Word.Document Dim oTable As Word.Table
[Code].....
The problem is, if the data in the for each loop extends to next page, I want the entire data in for loop to move to next page. I think of adding a page count integer and verify it with starting and ending to determine and change the page.The problem is I dont know how to insert a page break at a specified line number. page break is Word.WdBreakType.wdPageBreak but how to insert it at a line number?
I've been working on a report and it has 2 subreports, one of them can outgrow the region destinated for it (on a preprinted paper), and I want to break the subreport on a new page of the main report (with page header and page footer).
I am writing a report to an excel template and am trying to insert a page break into the report. Part of my code is included:
Imports msWE = Microsoft.Office.Interop
Dim Rnge As msWE.Excel.Range = excelApp.Range("A20:M20") Dim excelApp As New msWE.Excel.ApplicationClass
excelApp.Worksheets.HPageBreaks.Add(Rnge)
Now the pagebreak code executes but it does nothing. Its almost as if it is being ignored. Also I have heard that using Microsoft.Office.Interop is not a good idea as it is slow and unstable.
Can someone tell me how to stop the output of this code from placing a page break after it finds the selection.It's placing a blank page at the beginning and end of every printout.I suspect it has to do with the insert.break method, but cannot figure out what needs to be changed. [code]
I am using sockets to send message between computers. I send the messages alright. What I want is when the message "x0x" comes, the client must be closed within 5 minutes. Teh admin can cancel the request by sending message "-xx" as well. The routine that checks for incoming connections and accepts messages uses WHILE TRUE...END WHILE since it must always listen. Once I get a message, I need to fire a timer control or other that fires within 5 minutes. But the program cant leave the WHILE TRUE at all. If i exit it early, the timer fires and the program does get exit. How do I fire the timer or other routine while still the WHILE TRUE routine checks for incomin connections and messages?
I am having tremendous difficulty getting word automation to insert a page break in my document. The app is generating letters in word and saving them....the code below shows where I am writing the first page (str.tostring) then all of the code after that are the various ways that I have tried to insert a page break so that it will go to the second page and I can unload information into the second page of the document. [code]
is there any way to reference a particular code routine in VB.net external to the current loop/routine?Example:
If Var01 < 5 [Routine A] Else [Routine B] End If
where Routine A and Routine B are code sequences at the end of the entire program -- such as outside of the current sub or class? The idea would be to reference an otherwise repetitive code.
I have an asp page with vb.net code that will query a database and present the user with the number of records that exist that need to be exported along with a button to export them. After you push the export button, it will prompt for a location and filename. But after that, it will not refresh the page with the new counts that now exist. Or in this case update the count to zero for the button they clicked. [Code] So how can I tell the page to refresh with the new counts. It almost seems like I need to tell the process to wait until after the user has finished finding the location and saving the file but I don't want to add a generic threading.thread.sleep in, I want it to only wait until they are done and then refresh the page.
I'm having a little difficulty Setting the .text value of a Textbox in an MDIChild from a Subby in a standalone class.
I'm at this point:
[code...]
I know that the data exists because it displays in the Message Box ( MsgBox("first item = " & ds.Tables(0).Rows(0).Item("NameLast").ToString())) and the executes fine, but for some reason, I can't get the text boxes in LeadsMod2 (Open as MDIChild) to update.
I have a sub routine where I pull in information from a database. I want to use variables from this sub routine in another sub routine. I tried making everything public but it doesn't want to be friendly and share.
Dim strEmail as String Public Sub readDB() strEmail = "whatever@doohikcy.com"
[Code]....
The readDB would read the database and set the variables and do whatever it needs to do. Then when they submit the form it would e-mail the form to whatever the email address was.
So I have some vb.net code, and I have a nested For loop inside a For loop, and then I have EXIT FOR statement, will it break out of one loop, or the whole chain?
How can I implement a sub routine or function that does a test for number validation in text fields and then also returns the value of the text fields (if they were valid) back to the main routine?
i have written a sub routine for a Save>Menu option for a MDI Text Editor, Please see my code below
Private Sub SaveToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SaveToolStripMenuItem.Click Dim f As Form2 If f.Text = "Text Editor V.2 - New Document" Then
I am trying to save the displayed text of this PHP page into a text file: [URL]
The page is from the Taiwan Stock Exchange, and I am trying to use VB6 to save the daily record of each stock into the hard disk.
Here is what I would like to achieve:
1. Enter a stock ID into the search box labled "股票代碼". The ID is a four digit integer such as 4111, 6122.
2. After submitting the ID, save the displayed trading record into a text file.
I do not know how to submit a stock ID, nor saving the displayed text. So far I am only able to save the source of the webpage, but that it does not contain the data I am looking for.