I need to basically search for either a string such as "I-AM-RIGHT-OVER-HERE" or search for a sequence of bytes and return the offset of where that string or byte sequence is at.
View 1 RepliesI have a binary file. If I look at it with a hex editor, the first values are:208, 207, 17, 224, 161, 177, 26, 225, 0, 0, 0, ... etc.It has a length of 330240 bytes I have tried to open it and read it into a string so I can manipulate it and write it back. No matter what I use, I either don't get the correct number of bytes or the values in the string are incorrect. The most common error results in the first values being: 63, 63, 17, 63, 63, 26, 0, 0, 0 .... etc.It is interesting that it appears that any value > 63 becomes 63.
I get the 2nd values by a simple loop:
For lnx = 0 To 99
Debug.Write(Asc(line.Substring(lnx, 1)))
Next
I have tried a whole number of ways to read in the file, including filestream, My.Computer.FileSystem.ReadAllText, File.io.readAllLines, etc.All either give me a string length of about 324000 (not sure why) or, if they do, don't have the correct values. Yes, I have tried various encoding options.
I need to find a string (sort of like: "D" & Chr(0) + "L" & Chr(0) + "S" & Chr(0)... ) so I can then replace that portion of the string with a new value, then write out the file.I use the ".indexOf" to find the data in the string.Why can't I load the file into a string? Or, do you know of an easy way to find some text (similar to above) in a file and then replace the next x number of bytes with a new value and close the file?
Basically I am looking for a means within a asp.net 2.0 (or higher) application, to identify a time zone and UTC offset for a specific location and date. I want to be able to look up the time zone rules using either city & state, Zip, or LAT & LON I have an event database that tracks location, date and time for the events. Times are recorder relative to the event and the records do not currenlty indicate the timezone for the event or whether or not DST is in effect. Recently, I have encountered a situation where I need to link several events across different time zones. What I am looking to do is:
first, record a master event, say for August 13 2012 at 8:PM in New York, NY 10021
Second I need to record a related event in Houston TX.
When I record the related event I want it to automatically populate the date and time relative to its local time time zone rules. To do this it needs to be able to identify the effective timezone and UTC offset for the master event as well as the linked event so that I can calculate the correct date and time to display on the satelite program. As a future update I would probably capture the time zone /utc offsets with each program so that I don't have to recalculate the master record each time I want to add a related event.
So far I have not seen a way from system.timezone or timezoneinfo to be able to look up a timezone and the effective UTC offset of a given date and location.
I want to replace some bytes from a binary file .[code]...
If the value of the textbox is too short I want to replace the remaining bytes for a new value "0"
The question is quite simple for all of you . I have a binary file . A description for this file says that
[Code]...
How to search a dump.bin for a pattern then take the offset it is at, i.e. 8DB358 and search that string as hex? Here is an example of what was being done without a program for it:[URL]..I'm making debug codes for a gaming system... I'm Using visual basic 2008 express edition on windows vista
View 1 RepliesI need to read a binary file. The Byte-Ordering in this file is different from the Intel-Standard. In good old FORTRAN I've used Equivalence-Statement in such cases (For example Defining a 4-Byte-Integer-variable and 4 Bytes at the same memory location / read the file as bytes / store them in the neccessary order / access the memory using the Integer-Variable). In VB dotnet I programmed a solution using shift-operators:
[Code]...
I have a binary image (Black/White) that showing several white spots (3 to 4 spots). Is there any method to identify the position (coordinate) for every white spot.
View 1 Replieswhen i transfer the bytes sent by the client program to a string the string length is affected.when i put the bytes sent by the client program to a message box. it returns the corrrect text. but when i check the length it will return 8192 or higher. but the actual size is just 5.
My Code
Dim tcpClient As TcpClient = tcpListener.AcceptTcpClient()
RichTextBox1.Text = RichTextBox1.Text & vbNewLine & "Connection accepted."
' Get the stream[code]....
I have been googling this and have not come along a working solution for an entire day. I don't know anything about binary data types (as I've never knowingly used them) and I'm trying to write a binary value that I see in the registry, to the registry. Now, all I see is the following [shown below]... and if I try to pass that as a string to the RegSetValueEx in the WinAPI and of course it errors out...
I do not know what 'numbers' I need to pass into the lpData As Any, argument of RegSetValueEx (i tried a bit array) in order for it to come out as the following [shown below] in the regedit. I really have no idea, and my tests to place random numbers in the bit array just produce corresponding random "figures" as visible in regedit that I do not understand how to 'tie' them together logically. here is the culprit!
[Code]...
I'd like to convert a string which contains a decimal number into string that contains the binary value, the octal and the hexadecimal value of that decimal number.Afterwards I also like to convert a string containing a binary, octal and hexd. number into a decimal string.Basically I'm looking for the functions:
dec2bin
dec2oct
dec2hex
bin2dec
oct2dec
hex2dec
I'd not prefer to rewrite a function, I'm sure the framework must have these functions already.
I've got an issue with a program I am writing. The specific issue is replacing characters in a parent string by finding, and matching, specific characters within it that are parsed from an external xml file. It's for a chat-like client.Here's the 2 classes I am using to pull the emote strings, titles, and id from external XML:
Imports System.Text.RegularExpressions
Imports System.Xml.Serialization
Public Class emote
[code].....
It's become a night mare. All day today I have been trying to tell the hex contents of the bytes in a string. In this case Im attentpting to detect a VBCRLF. In the debugger this in displayed as a " " and thats it no matter how I have to setting set.It makes it difficult doesn't it? The thing is that debuggers are quite capable of displaying adresses, of course this is only relevant to systems that do not change virtual addresses (which Windows does not)only physical addresses.Why is it impossible to see the values of a vbcrlf (0D0A) in a string? This sytem is becoming impossible to use.
"MODERN PROGRAMMING is deficient in elementary ways BECAUSE of problems INTRODUCED by MODERN PROGRAMMING." Me
Private Sub txtname_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles txtname.TextChanged
myConnection.Open()
[CODE]...
I want to four digit code like Abneesh than first query finding max of A and second string take string A than code generate like A001----------A999
i have a string array that i want to output to a text file. the array size is 10000. i fill the array starting from 0 with some strings. at the end, i only want to show the array from index 256 to the last array that is not empty (for eg. if the array is filled with data from 0 to 2000, i only want the text file to show the data from 256 to 2000 and ignore the remaining strings). Is there any function to do this?t i use is shown below
Dim myArray(10000) as string
Dim strArray As New System.IO.StreamWriter("c:List.txt")
strArray.WriteLine("{0,10}{1,30}", "Index", "Symbol")
[code].....
I'm trying to send a 28 character string to a remote ip address and port. I've done this successfully in vb.net using the following code snippets:
Dim swon As String = "A55A6B0550000000FFFBDE0030C8"
Dim sendBytes As [Byte]()
sendBytes = Encoding.ASCII.GetBytes(swon)
netStream.Write(sendBytes, 0, sendBytes.Length)
I now have to convert this across to c++ and have the following so far:
char *swon = "A55A6B0550000000FFFBDE0030C8";
array<Byte>^ sendBuffer = gcnew array<Byte>(bufferSize);
sendBuffer = BitConverter::GetBytes( swon );
tcpStream->Write(sendBuffer, 0, sendBuffer->Length);
but am getting stuck at this point. I'm sure I'm missing a simple syntax error but I can't figure it out!To clarify, I'm not getting an error, but I don't think the string is being converted to bytes correctly as when I convert back, I just get a '01'
Im making a database converter (phpbb to ipb)I noticed during analysing both databases that the posts of phpbb are converted to bytes as you can c here
-- Table structure for phpbb_posts
-- ----------------------------
CREATE TABLE `phpbb_posts` ([code]....
I want to convert those to regular text again but I have no clue how to script my converter to lookup the bytes place (after 0x) converts the string (as the bytes arent in array) and where to stop converting the bytes (after the ,)then replace the bytes text by the regular text and this needs to be in a loop because all posts need to be converted to normal text.
I have string, what contains bytes... (Example below)
And I need convert these bytes into text... But I really don't know how...
Code (For Better understand):
CODE:
and now, how to convert it into text? (The Result text in "ProductName", BTW)(I don't want to use Hex Editor still )
I've got the following simple code to convert Bytes to a Hex string :-
Code:
Shared Function BytesToHex(ByVal bytes() As Byte) As String
If bytes Is Nothing Then Return ""
Dim S As String = BitConverter.ToString(bytes)
[Code].....
The HexToBytes routine obviously can take a lot longer to complete than the BytesToHex routine and is noticeably slower when dealing with a lot of data. As I'm converting a lot of hex strings back to bytes, I wondered if there was a more efficient way of doing it without looping through the whole string as I am doing?
Ive 2 buttons and 3 text boxes.Button 1 encrypts the data from textbox1 to bytes, converts it to string and display it in textbox2.Button 2 reads string from textbox2, converts it to bytes and decrypts it displaying it in textbox3 (textbox1 and 3 got to match).The encrypt/decrypt process works fine but the conversion from string to bytes is failing and cannot seem to find the problem. The error states that the string doesnt have the same format (Bytes(i) = Byte.Parse(Values(i))
[Code]...
This has to be incredibly simple, but I must not be looking in the right place.
I'm receiving this string via a FTDI usb connection:
'UUU'
I would like to receive this as a byte array of
[85,85,85]
In Python, this I would convert a string to a byte array like this: [ord(c) for c in 'UUU']
I've looked around, but haven't figured this out. How do I do this in Visual Basic?
first asking an question and then introducing but i kinda need some help in here.First of all im not new to VB, But i am to VB.NET and espessially socket programming.Now i need an way to send the lenght of the string being send in bytes before the string itself so <lenghtinbytes><string>.
ive tried so many things, and its possible because the client itself does it too...but just cant find an way.
[Code]...
I want it to do is that you input a string, then you select an algorithm (Theres only going to be one RijnDael) then you input a key, then the Initialization Vector comes from "txtIV.text" then you select the key bytes and the block bytes from the numeric up/down, then you either encrypt or decrypt.
View 1 RepliesOk i am having some issues designing a base-class to handle generics.Caveat is i need to restrict the type put in as a Numeric type, specifically Int16, Int32, or Int64 (Short or Long).I know you can do Of T as {Structure} but i dont want to select the key bytes and the block bytes from the numeric up/down.
View 2 Repliesi have a string array that i want to output to a text file. the array size is 10000. i fill the array starting from 0 with some strings. at the end, i only want to show the array from index 256 to the last array that is not empty (for eg. if the array is filled with data from 0 to 2000, i only want the text file to show the data from 256 to 2000 and ignore the remaining strings). Is there any function to do this? i am using visual basic express 2008. The code that i use is shown below
[Code]...
I have a somewhat unique problem that I have looked for an answer to and continually hit brick walls. The problem is this. I'm using vb.net to read a byte array from memory which total 32768 in length, which is converted to a string. The memory is the active console chunk in the game Call of Duty 4.
[Code]...
I am working on a project that needs to send hex bytes ie.Sub receives an integer like 276 and then performs
Dim CmdBuf() As Byte = New Byte() {Byte1, Byte2}
strHex = Hex(intNumber) which makes strHex equal to 114 in hex...
Next I need to break into separate bytes something like
Byte1 = Left(strHex, 1)
Byte2 = Right(strHex, 2)
But this does not work......Hex value of 114 needs to be converted into a couple of bytes like &H1 &H14 to be sent out the serial port.
.Write(Buf, 0, 2)
How can I do this?
I am using sockets and such for a while now, and want to go an step further in this. Now for example lets say an client would send [lenghtofstringinbytes]string[somethingelseinbytes]another thing.
How can I send/read/parse it?
Now I am doing this:
Private Sub onDataArrival(ByVal ar As IAsyncResult)
Try
Dim obj_SocketState As StateObject = CType(ar.AsyncState, StateObject)
Dim obj_Socket As Socket = obj_SocketState.WorkSocket
Dim sck_Data As String
[Code] .....
So using Getstring for it, but thats not the way for this as you get nothing else but an empty string back. So I have to parse it without converting it to an string.
I am currently writing a VB.net app to control an Integra AV receiver. I have success controlling it via Serial, but it also has a network port for TCP control. I can control it using CommandFusion iPhone app but am now wanting to create a windows app to control it. I have created client/server software that I use to talk from one PC to the which works well. So I am going to use the same client software to talk to the AV receiver. I can connect fine to it, I just haven't quite got the protocol right to actually control it.
[Code]...
I keep getting a ProtocolViolationException "Bytes to be written to the stream exceed the Content-Length bytes size specified." on the following code.I've tried setting Content-Length numerous ways with no success.
Dim url = "https://domain.com"
Dim req As WebRequest = WebRequest.Create(url)
req.Method = "POST"
req.ContentType = "application/xml"
[Code]...