I am trying to play a swf file stored in my app resources.i have just done it by creating a temp file and load into flash component.[code]but it should be done without extracting the whole file onto disk. i think there is a way using MovieData property. I tried several ways to assign value to MovieData Property but never work though.
View 7 RepliesI need to modify a button so that I can add a flash property which will flash the backcolor red.Along the lines of RedLightButton.Flash = true.I have the following
Public Class RedLightButton
Inherits Button
Private WithEvents FlashTimer As New Timer
Private isFlashing As Boolean = False
Public Sub New(ByVal ButtonText As String)
[Code]...
I'm a Flash developer and since short I wanted to try putting .swf's inside of vb.net applications.I can put it in, but whenever I want to build it I get the following error.
An error occurred creating the form. See Exception.InnerException for details. The error is: Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG))
System.InvalidOperationException was unhandled
[code].....
When I right click on the component area, a contextmenu appears.I want to disable this OR remove "Settings" and "About Adobe Flash Player..".I searched the internet for a solution,but almost all the suggestions were about the Visual Basic 6. Anyone knows how to correct this in Visual basic 2008 ? (And sorry for my English if there is a mistake )
View 1 RepliesI put a swf inside my form in vb.net without problems , but I want discover how can I get the name of the text tool there is inside the swf.I try to use :
Dim
test As String = shockwaveflash.Controls.Item(x).Name
but it doesn't work as I guess .... how i find the name of componet inside the swf? i use VS2005?
I want to click on the button, then change the itself position
the visual studio prompt me that is a public property, and the type is double. Why I cannot change the value? And it does not provide any method let me change the top property, so how I can change the property?
<Button Content="Button" Grid.Column="1" Height="23" HorizontalAlignment="Left" Margin="0,0,0,0" Name="Button1" VerticalAlignment="Top" Width="75" Grid.Row="1" />
MsgBox(Button1.Margin.Top)
Button1.Margin.Top = 10
I placed this checkbox named owner on my form. When i build the project i got the error as
Quote: 'owner' conflicts with property 'owner' in the base class 'Form' and should be declared 'Shadows'
[Code]...
Good day all,A Flash movie that plays fine when opened in a web browser is playing slowly and choppily in my VB 2005 WinForm application on the same machine.
View 7 RepliesHi, I'm just beginning to teach myself how to do OOP in VB 2008 Express. I have a quick question after seeing a video online.Is a VB variable the equivalent of an 'instance' in Flash and a VB object like a 'symbol' in Flash? Is this what it means by a variable being a reference or pointer to an object and not the object itself?
View 5 Replieswhy is it i need to click the shockwave flash player/flash/.swf before it will exectue.
here's my code for shockwave flash player
Handles AxShockwaveFlash1.Enter
AxShockwaveFlash1.Play()
AxShockwaveFlash1.Movie = "C:UserscompnameDesktopflash1.swf"
Me.AxShockwaveFlash1.BGColor = Me.BackColor.R.ToString("X2") & Me.BackColor.G.ToString("X2") & Me.BackColor.B.ToString("X2")
why is it i need to click the shockwave flash player/flash/.swf before it will execute.here's my code for shockwave flash player
Handles AxShockwaveFlash1.Enter
AxShockwaveFlash1.Play()
AxShockwaveFlash1.Movie = "C:UserscompnameDesktopflash1.swf"
Me.AxShockwaveFlash1.BGColor = Me.BackColor.R.ToString("X2") & Me.BackColor.G.ToString("X2") & Me.BackColor.B.ToString("X2")
Well I have a Flash Movie loaded in the Flash Control, And I need to reload it. (So the new base url is used) How do I do this?
View 1 RepliesI am converting an old Vb6 solution to .net 2.0 in vs2010. I've been working in C# for about 3 years now and .net for 5. I don't recall having this problem in C#, but if I want initialize a readonly collection of DerivedControlFoo Is there a clean way to do it besides creating a sub to do it all off somewhere else? I'd love to be able to do it at the class level at the declaration for readability and simplicity.
View 1 RepliesCreate a DLL component for database operation and use created component in another project. Required methods, events and properties
a. Connect
b. Add
c. Delete
d. Save
e. Record navigation (first, next, previous, last)
f. Properties for all database fields
g. Events for validation of database fields.
I've created a component whose name I'd like to be able to change while editing in the component tray. I've added a Designer action for a name property, but now I'm stuck.
Looking at the property grid, I can see that the name property is parenthesised, indicating that it's not a regular property.
I'm having some very weird issues with interfaces right now.
I have a very simple setup. In one of my class, I have a Property implementing a Property from an Interface.
In my class it's like:
Private _oForm As IForm
Public Property Form As IForm Implements IContainer.Form
Set(value As IForm)
[Code]...
I have like dozens of interfaces like this working throughout my project and I can't believe this simple one can't work!
Is there a way for implementers of an interface where a ReadOnly property is defined to make it a complete Read/Write Property ?
Imagine I define an interface to provide a ReadOnly Property (i.e., just a getter for a given value) :
Interface SomeInterface
'the interface only say that implementers must provide a value for reading
ReadOnly Property PublicProperty As String
End Interface
This means implementers must commit to providing a value. But I would like a given implementer to also allow setting that value. In my head, this would mean providing the Property's setter as part of the implementation, doing something like this :
Public Property PublicProperty As String Implements SomeInterface.PublicProperty
Get
Return _myProperty
[code]....
I searched on the forum / Internet for the solution how a PropetryInfo object (of a Public property) can reveal if it has a Private Protected Setter ... it was all in vain .... all help I found was about how to "Set" value of a public property having a Private Setter.I would like to know if I have a PropertyInfo object of a public property, how would I know if its Setter is Non Public?
I tried, in a exception handling block, where I did a GetValue of the PropertyInfo object and then called SetValue by setting the same value back... but to my surprise it worked well and didn error out.
[Code]...
I'm having a few problems converting some code into VB.NET from C#. Most of the translating is done, but I am getting errors when I try to run my code, and I can't figure out what is causing them. Here is the Sub I translated.
Public Sub CreateWidget()
Dim blue As LCDColor
blue.Red = 0
blue.Green = 0
[code]....
The error I receive on this line ("vision.Widgets.CreateWidget(wg1)") reads "In order to evaluate an indexed property, the property must be qualified and the arguments must be explicitly supplied by the user."
start with I was given a program by a friend that was created in Excel 2003 with the help of Visual Basic Editor. He said he used Visual Basic 2003, which he is not 100% sure about. Anyways he used CurLine in the program and when I try to open it in Excel 2007 and then open the Visual Basic Editor and run the program I get the following error:Run-time error '-2147418113 (8000ffff)':Could not get the CurLine property. Unexpected call to method or property access.
View 2 RepliesI have a very simple class that holds a few public properties - ID, Text, Colour, etc. and a Boolean called 'SelectedItem'. Just like the Checked property on RadioButtons, only one item can have its SelectedItem property set to True within a particular group. Note: there will be several separate groups (lists), each allowed to have only one item with SelectedItem = True.
My first thought was that I would probably just have to handle everything outside of the class, setting SelectedItem to False for every other item in a particular list when another item was selected. But that seems rather inelegant to me. So I've been trying to think of how this might be done within the class. For example: could I perhaps have a private string property called say "GroupName" - set in the New sub when adding a new instance of the class - and then use a private shared method to set every item's SelectedItem property to False, provided the item has the same GroupName as the newly selected item? I would have a go at doing this but I have no idea how to enumerate every instance of a class from within that class, or whether that's even possible. Is it? Or is there another (better) way to achieve my goal? Here is a cut-down version of what I've got so far:
Public Class ResourceItem
Public ID As Integer
Public Text As String[code]....
As can be seen: instead of instantiating a new ResourceItem and passing that as an argument to the manager's Add procedure, I'm simply passing the details of the new item and the procedure is creating the item from those. I don't know whether this is a good or bad idea - please advise - but I've done it because I couldn't figure out how to make the SelectedItem property only writeable by the manager, so I wanted to avoid having directly accessible objects that could have their SelectedItem property set to True without it deselecting all the other items in the same group. Of course that still leaves the possibility of setting a variable to one of the manager's list items and setting it from there, so I would still like to know how I could prevent that, if possible.
UPDATE: I didn't use the code above in the end, deciding instead to go with Cyborgx37's solution - which seems to work perfectly well for me despite the warnings about best practice. I also realised I would need to use the same class in another scenario where multiple items could be selected, so it was easy to add a Boolean property to the manager to enable that.
Using the following code I get Identifier expected and Property access must assign property or use its value errors:
ViewState["SomeKeyValue"]
What is wrong with this code?
I have a dataview an i would like to show the count property in a text box.
i tryied the following
me.textbox1.DataBindings.add(new DataBindind("Text",DataView,"Count"))
But i have a exception.
I have a listbox binded to a list of objects. For each list item I wanted to have a rectangle whose fill color is determined by a few properties of the binded object. So I did the following:
Made sure INotifyPropertyChanged was implemented on my object.Created a class to expose the properties I am interested in as attached properties.Binded the properties of the object to the attached properties of the rectangle Created a style that uses triggers to set the rectangle fill based on attached properties.
This works, but only the first time the property of the object changes. After that, the attached properties do not seem to be receiving notification when the data object's property changes. I have double checked and my data object is raising the INotifyPropertyChanged event.
<Rectangle Style="{StaticResource RecordStateRectangleStyle}"
Width="10" Height="10" Stroke="Black"
local:RecordAttachment.RecordState="{Binding Path=RecordState}"
local:RecordAttachment.IsDeleted="{Binding Path=IsDeleted}" />
[code]....
I have a weird question and I honestly hope you understand what is happening here: I design my form (using VB.NET) and put on it a few textboxes, comboboxes and a listview. After the design, I want to adjust the TabIndexes for each control on the form. On the right-hand side of the interface is the property box.
I then select the 'TabIndex' property item and enter a number key (for instance 0) for that selected item. I then select the next textbox control and enter the next number (for instance 1) WITHOUT re-selecting the 'TabIndex' property item. As soon as I select the combobox or listview control, the currently selected property item jumps to 'Items' or 'Collections' and does NOT remain on the 'TabIndex' property item. Why is this happening? Everything worked fine and all of a sudden this starts happening. Should I reset the editor settings or how can I resolve this matter?
I have a listbox with several list items added. I want that as user click on an item, I should be able to show its property. This should change for different items. For example (hypothetical) : Listbox has numbers 1 - 10. Now when I select 1 I should be able to set property - Name, Lastname, Colour, Age.
When I select 2 I should be able to set - Age, Hair Colour (clr shows), Weight, Date. When I select 3 then - City (combo box drop down), Country, Age only. This way value changes for diff items. One way is to put them in property grid and show them. Though this looks nice but adding/removing items in that is not easy. You need to have a class that refer that to prop grid. Do I have to code for each classes for all values in listbox or is there an easier way to manage items in property grid. If you think prop grid is not the right tool for such an activity then can you suggest something else.
I receive a System.Data.SqlClient.SqlException in the following code: Specifically Incorrect syntax near ' In order to evaluate an indexed property, the property must be qualified and the arguments must be explicitly supplied by the user. The exception detail in its entirety is shown below the code.
[Code]...
on a Windows Form, an object myObject is bound to myObjectDataBindingSource like this:myObjectDataBindingSource .DatSource = myObject on the form, i have a check box bound to the property: chkProp1 for example of the object: myObjectDataBindingSource In the code when the checkbox is clicked, I need to go in code and change another text property of the object txtProper2 for example like this:
Private Sub chkProp1_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles chkProp1.CheckedChanged
[code].....
I have the following property in a property grid in VB.Net 2010.
<Description("Rapid Entry Post Car Wash Settings CarWashOptionPushButtons"), _
Category("Post Car Wash")> _
Public Property CarWashOptionPushButtons() As String
[code]....
I need to make this property a list box that gets the values from a database table and populates the list box with the values from the table. I have tried numerous things to no avail.
when I'm creating a new property in Visual Basic .NET in Visual Studio 2010, the rest of the Property (template?) doesn't complete the basic framework of the property in the code editor. It is now treating a statement like:
Public Property Length() As Integer
Instead of completing the property as it used to (code follows), it simply goes to the next line:
Public Property Length() As Integer
Get[code].....
What happens now is that, if I type in the 'End Property' code, the name of the property will now be highlighted as an error since it doesn't have a 'Get' or 'Set' portion.However, when I THEN type the 'Get' on the line following the 'Public Property Length() As Integer', then the balance of the property is created in the code automatically.I don't know how this got changed, but would love to change it back.Does anyone know if there's a setting in VS2010 that addresses this, or if it's something with the basic templates that visual studio uses for creating the basic code components?The weird thing is that for everything else, from class declarations, structures, functions and subs, the IDE still creates the balance of the code structure correctly. The only area where it doesn't is for Property declarations.