Dim res As DialogResult = frmOptions.ShowDialog()but nothing happens. The dialog box will not appear. If I run this method from another location in the code it executes fine (i.e. displays the form in dialog mode and code executes fine thereafter). Hence, it may be the way in which I arrive at this code that is causing my problem, but I cannot see to find what is wrong.
View 8 RepliesI've come across a situation where I try to run a simple line of code in a method Dim res As DialogResult = frmOptions.ShowDialog()but nothing happens. The dialog box will not appear. If I run this method from another location in the code it executes fine (i.e. displays the form in dialog mode and code executes fine thereafter). Hence, it may be the way in which I arrive at this code that is causing my problem, but I cannot see to find what is wrong.
When I pause the debugger the line of code is highlighted in green but I can't see to step over it or into it what may cause this to happen, or what I should be looking for that might be causing the problem??
im running this code to load a form and call a public method inside it:
vb
[b] newForm.Show()[/b]
Call newForm.editToolStripButton_Click(sender, e)
but when i use form SHOWDIALOG method it doesnt execute
Call newForm.editToolStripButton_Click(sender, e)
I have a form being called form several forms using ShowDialog().
1. Is there a way for called form to know which form called it by receiving a code or key from the calling form?
2. The calling form has a gridview. How can the called form pick up a column's value from the currently highlighted row in gridview in the calling form?
I'm having an interesting issue that I can't reproduce on a different project, but can consistently on this one. I have no clue what might be causing it, but am hoping that someone may have seen it before.
I have a main form, from which I run a series of checks. On this form, I have a listview control. Because of some issues with the refreshing of this listview control, I had to create my own messagebox. It's just a form that displays some text ( it also happens to look nicer than MsgBox; in my opinion, anyways ). It's been working great for months, until recently.
My problem is that on my main form's load event, I run this check, which returns an error within a try/catch block. I then call my custom messagebox with a message. It in turns calls it's ShowDialog() function.
In any other situation ( after the main form has been loaded ), I have no problems. The messagebox goes on the screen and behaves appropriately ( ie: waits for my input and acts as a modal dialog ( stops execution of my main form's thread ) ). However, on this onload event, my messagebox comes up and goes away almost immediately afterwards.
I've traced it all the way to the showdialog() call. For no explicable reason, it appears to skip right over this call, without me doing anything on the form.
Here's what the inner trace looks like ( when I put a breakpoint on the onclosing event for this messagebox form ):
CODE:
Quote:
Originally Posted by kaliman79912
Quick note: Close does not dispose of the form if it was displayed using .ShowDialog, but I guess this is not the case.
I did not want to hijack the other thread [URL] but would like to have this clarified for me.
I have three form First Form is MDi form and Second Form Is Child Form and third Form Is small form.The small form conatin DataGridView searcher for name and I want whe I press the Event Mous Click he copy value from cell"column" of DataGridView to Child Form..[code]
View 7 RepliesI have a form that I am using to search for records in a dataset, it has a text box for entry of the search criteria and a 'Search' button to initiate the editing of the entry and .Filter on the BindingSource. This is one form in a project with many, when I show it using .ShowDialog it always disappears, (not visible and not loaded) after the 'Search' button is clicked, I have stepped through and there is no .Hide or .Close that it encounters, it performs all of the logic correctly but control is returned to the main form it was shown from. When I use the .Show method, I do not have this problem.
View 5 RepliesI converted this app from VB6. I have 2 forms. Form1 instantiates Form2 via a Menu Item.I am having trouble getting Form2 to end when clicking close (X). If Form2 is 'idle' it closes fine; but if I am in a loop processing anything all the events fire, but it continues processing in Form2. I've tried messing with Dispose, Close, Application.Exit, Application.ExitThread. My last attempt was creating my own event to fire back to Form1 and dispose Form2 -- and it hits it but Form2 is still running. What is the deal? BTW if I use just Show vs ShowDialog -- Form2 just blinks and disappears.[code]
View 2 RepliesI converted this app from VB6. I have 2 forms. Form1 instantiates Form2 via a Menu Item.I am having trouble getting Form2 to end when clicking close (X). If Form2 is 'idle' it closes fine; but if I am in a loop processing anything all the events fire, but it continues processing in Form2. I've tried messing with Dispose, Close, Application.Exit,pplication.ExitThread. My last attempt was creating my own event to fire back to Form1 and dispose Form2 -- and it hits it but Form2 is still running. What is the deal? BTW if I use just Show vs ShowDialog -- Form2 just blinks and disappears.
Form1 does this
Dim f2 as Import
:
[code].....
In my program I use WebBrowser control for OAuth. It's located on vk_auth_window form. So in the code I call vk_auth_window.WebBrowser1.Navigate(vkauthurl). If authentication is successful, I silently get token, but if user is not authenticated a form vk_auth_window is showed to them to enter username and password. To check this I catch _DocumentComplete event and check for the right URL. I need no other code being executed until the user finished authentication or closed authentication form. ShowDialog() does the trick, but it somehow hides cursor from username and password fields in WebBrowser control. So I introduced a variable Dim showform as Boolean=True in and set it to False from the _DocumenComplete event and in the main code I use infinite loop.
While showform
System.Threading.Thread.Sleep(100)
Application.DoEvents()
End While
However it makes userinput slow due to thread sleeps. And If i remove them, it loads CPU quite a lot. Is there a better way to wait for form to close? What is it?
I have a new developer that is calling Showdialog (in VB.NET) on a Windows Forms form without first creating an instance of the form.How is this possible? I don't see a shared method for ShowDialog...
I'm not crazy about this approach either as it seems to me that the dialog will not be disposed until the application exits.What am I missing? Is this a new best practice?OK, Form2 is just a blank form.Public Class Form1 Private Sub Button1_Click(ByVal sender As System.Object,
ByVal e As System.EventArgs) Handles Button1.Click
Form2.ShowDialog()
End Sub
End Class
So you know how when you call "Form.ShowDialog" from where ever you call it, it blocks until the form being displayed closes. And then the function returns whatever result it was.I want to know how to block like, but without a form, yet still have the "main ui thread".Basically I have this long process that needs to thread out and do several things... and it's heavily event based. It jumps between two threads, the main ui thread, and it's own background thread. The main ui thread needs to have access so that I can randomly open different dialog boxes for things... sometimes they're just windows asking to hit OK or Cancel to continue, others it's to perform some action, etc etc.
But there is NO central form related to it. It's a complete background thread running that randomly hops over to the main ui thread for things.Right now I have this class I designed called lets say "DoJobProcessor". On it is a function called "BeginDoJob" that threads off from the thread pool... when ever I need to jump back I use a ManualResetEvent to block on the background thread, jump over to to the main thread with "invoke" and passing a reference to the MRE, then release the block when done there and continue on on this background thread.
All while this is going on I just set the form I'm trying to block the main ui thread from managing by just setting its Enabled property false.It all feels just messy and annoying... and I was just writing something using ShowDialog and I was like... HEY, what if I could block this BeginDoJob method, hi-jack the main ui thread, then let that function return the result when done instead of having this "Complete" event with the return value in it. It's obviously possible because ShowDialog does it, but I don't know how.
This way the job I'm performing isn't always waiting for the main ui thread, instead its the other way around... the ui thread waiting for it, the way it aught to be. Show something, branch off do some stuff and just idle the display while it does it, come back show something else, branch off and just idle while it does that.
I have a form that is called w/ ShowDialog. Inside that form, I want to pop a message box to ask the user a question, but it doesn't show.[code]
View 2 RepliesI have problems with a form and load event.My form manage items that can be added, deleted or modified. In load code, I initialize all vars to cero. This is OK to be ready to add items.
My problem is with modify and delete. To carry this, I must load vars from a source. So, in my foreing code I have this:
[Code]...
My problem is that when showdialog is called, all data which were loaded from duplicar funct is put again to cero. How can I avoid this and load correct data into the form.
I am writing an application in VB2008 with several forms. From Form1 I open a new form with me.hide() and then form2.showdialog(). The system works but in form2 the application runs without screendisplay until the program waits for a user input. So first all databases are processed. Meanwhile no screen is visible for the user. Sometimes this takes about 5 seconds. I would like the user to see the build up screen directly.
View 9 RepliesI want to open a form as modal without using showdialog()Problem with showdialog() is we can not open the form as mdi child with it. i want to open few forms as modal but as mdi child forms. but i want to make sure user cannot go anywhere else without closing thst form.if we set parent form enabled = false then i can not set it as mdi child otherwise that form also becomes enabled=false.
if we write showdialog() then so many form icons will appear on taskbar. it we open as mdi child then only one icon appear i don't want to appear so many icons on taskbar so i want to open as mdi child but as modal
for eg. Mainform = mdi form
from mainform open formA = as mdi child of main form (but modal)
from formA open formB as child (modal)
from formB open formC as child (modal). if i use showdialog() then so many form icons on taskbar.
h2007
I am creating a VB program that has a Main class, and 4 windows forms. Each of the forms has a back and a next button to navigate trough the forms. The problem is that when I hit next (Here is the code)
Private Sub continueButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles continueButton.Click
VS 2008 Remember Textbox Text when Form reopens
im using visual basic.net and this is my problem i have 2 form which have a two datagridview . when i update the datagridview in the form 2 its working fine and when i exit it in the form 1 its also update , but when im trying to to click again the edit button(from form 1) the program is automatically exit or crash.
the code from my form2 exit button
form1.showdialog
me.close
form1 edit button
[Code].....
I have a VB.NET 2010 Forms Application which includes a form with a textbox, and two buttons which I call from the main form using .ShowDialog
I've messed with something such that I can no longer prevent the dialog from closing when the user clicks the Ok button but has entered invalid information.
Here is the handler for the OK button's click event:
Private Sub cmdOK_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdOK.Click
If SomethingIsWrongWithWhatTheUserEntered Then
[Code]......
I have an outlook application, whenever the user receive a new mail I show him a form and some controls
The user needs to insert information and close the form. Sometimes the user is not near his machine so whenever there is a new mail I am adding new controls and modify the child size.
It has been successful using the Form.show() method but not in showdialog() i cant add controls and change the form size can someone please help on the subject?
[Code]...
I'm new in .Net and I have an application with windows form "LOGIN" When users enter the user and password and click "ok", then if user passes validation then I have the code Show(MDIMainMenu) (I'm trying to open an mdi form), but I receive the following error: "Form that is already visible cannot be displayed as a modal dialog box. Set the form's visible property to false before calling Show. Error Number 5"
[Code]...
I have a program that uses two forms. The program opens to the Main form, and the user can navigate to the other form from the Main form through use of a button. Here's the way I've currently written it: When the Main form loads, it declares and instantiates the other form during the load procedure. When the user presses a button, the second form is displayed by means of the ShowDialog method. On the second form, there is a Return to Main Screen button which closes the second form, bringing the user back to the Main form.
So, here's the structure of the code:
Code:
Public Class frmMainForm
Dim frmSecondForm As New SecondForm
Private Sub btnSecondForm_Click(blah, blah, blah) Handles blah, blah, blah
[CODE]...
Here's my reasoning: Originally, I wrote the code so that a new instance of the second form was created every time the button was pressed. The problem was that whatever data was displayed on the second form, previously, was lost when the user returned to it a second time. Since the user would be switching back and forth between these forms, frequently, I needed that data to persist.
What is the best practice for accomplishing this:
1) Declare and instantiate the second form on program start, as I have done, and use the button simply to show the form?
2) Declare and instantiate the second form each time the button is pressed but maintain the variables on the Main form and pass them ByRef to a custom constructor for the second form? Is this even possible?
3) Something else?
Im trying to create a stopwatch in one form and another form show my progress bar using a combo box for mins and seconds to show the progress bar on form1 1
[Code]...
I am trying to use a progressbar to show on main form and then finish when next form is loaded, I have got this code.
1. When I click on button, it must open next form, but the next form must only open when the data in my list box has been loaded from Access Databse. When I run my program, it only shows the progressbar and don't open the next form.
Main form code:
Public Class Main
Dim PB As ProgressBar
Private Sub main_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
End Sub
[CODE]............................
Using the code below:
Private Sub ShowDropDown()
Using f As New DropDownForm
f.Visible = True
Do While f.Visible
Application.DoEvents()
[Code]...
This was a guess, after looking at the Form.ShowDialog method in reflector.My question is, is there a managed call I can make to acheive the same result, and what does a button click do that other clicks don't?
ETA: The problem does not occur if I open the form using a key.
This is a database app where I am trying to check for possible duplicates and give the user the option to keep the new record or assign to an existing record.In form1 the user will enter data into a textbox. I use this information to build a bindingsource.filter. Then I call another form (form2.show()) to display results to user and get user response. This part all works correctly.
The problem is that as soon as form2.show() executes, I loose the contents of the textbox - and it appears that I am no longer in the bindingsource.addnew() method.
Iam creating an application. i have a main form it has 5 buttons i have created 5 more forms. my aim is to show a particular form for every button the form is opened in a new window i dont want to open in a new window it should be embed in the main form when i click anthor button it will show the related form in place of previous form
View 2 RepliesIam creating an application.i have a main form it has 5 buttons i have created 5 more forms.my aim is to show a particular form for every button the form is opened in a new window i dont want to open in a new window it should be embed in the main form when i click anthor button it will show the related form in place of previous form?
View 1 RepliesWhen I use
Me.Close()
Form1.Show()
It closes the whole app.
How would I change it so that it only closes the current form while opening a new one? EDIT: I put [Not Resolved] Because I accidently pressed the resolved thing