Form ShowDialog Disappears
Feb 24, 2009
I have a form that I am using to search for records in a dataset, it has a text box for entry of the search criteria and a 'Search' button to initiate the editing of the entry and .Filter on the BindingSource. This is one form in a project with many, when I show it using .ShowDialog it always disappears, (not visible and not loaded) after the 'Search' button is clicked, I have stepped through and there is no .Hide or .Close that it encounters, it performs all of the logic correctly but control is returned to the main form it was shown from. When I use the .Show method, I do not have this problem.
View 5 Replies
ADVERTISEMENT
Mar 28, 2011
I have a form being called form several forms using ShowDialog().
1. Is there a way for called form to know which form called it by receiving a code or key from the calling form?
2. The calling form has a gridview. How can the called form pick up a column's value from the currently highlighted row in gridview in the calling form?
View 4 Replies
Apr 4, 2011
For a while i have been playing a guessing game with this line of code.
If Sdown = True And Shooter.Top >= Me.ClientRectangle.Height Then
Shooter.top += Shooterspeed
End If
Basically i have a shooter on the form and whenever i press the down key the shooter moves down the form and disappears off of the bottom of the form. I have been trying to get this to stop for some while.
View 5 Replies
Aug 7, 2009
I'm having an interesting issue that I can't reproduce on a different project, but can consistently on this one. I have no clue what might be causing it, but am hoping that someone may have seen it before.
I have a main form, from which I run a series of checks. On this form, I have a listview control. Because of some issues with the refreshing of this listview control, I had to create my own messagebox. It's just a form that displays some text ( it also happens to look nicer than MsgBox; in my opinion, anyways ). It's been working great for months, until recently.
My problem is that on my main form's load event, I run this check, which returns an error within a try/catch block. I then call my custom messagebox with a message. It in turns calls it's ShowDialog() function.
In any other situation ( after the main form has been loaded ), I have no problems. The messagebox goes on the screen and behaves appropriately ( ie: waits for my input and acts as a modal dialog ( stops execution of my main form's thread ) ). However, on this onload event, my messagebox comes up and goes away almost immediately afterwards.
I've traced it all the way to the showdialog() call. For no explicable reason, it appears to skip right over this call, without me doing anything on the form.
Here's what the inner trace looks like ( when I put a breakpoint on the onclosing event for this messagebox form ):
CODE:
View 10 Replies
Jan 5, 2012
Quote:
Originally Posted by kaliman79912
Quick note: Close does not dispose of the form if it was displayed using .ShowDialog, but I guess this is not the case.
I did not want to hijack the other thread [URL] but would like to have this clarified for me.
View 5 Replies
Nov 4, 2010
I converted this app from VB6. I have 2 forms. Form1 instantiates Form2 via a Menu Item.I am having trouble getting Form2 to end when clicking close (X). If Form2 is 'idle' it closes fine; but if I am in a loop processing anything all the events fire, but it continues processing in Form2. I've tried messing with Dispose, Close, Application.Exit, Application.ExitThread. My last attempt was creating my own event to fire back to Form1 and dispose Form2 -- and it hits it but Form2 is still running. What is the deal? BTW if I use just Show vs ShowDialog -- Form2 just blinks and disappears.[code]
View 2 Replies
Jan 21, 2009
I converted this app from VB6. I have 2 forms. Form1 instantiates Form2 via a Menu Item.I am having trouble getting Form2 to end when clicking close (X). If Form2 is 'idle' it closes fine; but if I am in a loop processing anything all the events fire, but it continues processing in Form2. I've tried messing with Dispose, Close, Application.Exit,pplication.ExitThread. My last attempt was creating my own event to fire back to Form1 and dispose Form2 -- and it hits it but Form2 is still running. What is the deal? BTW if I use just Show vs ShowDialog -- Form2 just blinks and disappears.
Form1 does this
Dim f2 as Import
:
[code].....
View 6 Replies
Sep 8, 2010
I have three form First Form is MDi form and Second Form Is Child Form and third Form Is small form.The small form conatin DataGridView searcher for name and I want whe I press the Event Mous Click he copy value from cell"column" of DataGridView to Child Form..[code]
View 7 Replies
Jul 30, 2010
I am working on a web browser with the url bar in a tool strip.I have noticed that whenever I resized it, the textbox stayed the same.
[code]...
View 1 Replies
Jun 18, 2009
This happened to be once awhile ago and I thought I had the solution, but apparently I don't. Very rare, but what happens is, I'll start a new project, build my controls on the form, go into the code window and write some code. I'll save this all out, but when I reload the project, the code window comes up OK, but the design window is just gone. The code for the form and all the controls is still there in the form.designer window, but the form itself just will not appear, and there is no icon for it over in the Solution Explorer to click on
View 1 Replies
May 9, 2012
In my program I use WebBrowser control for OAuth. It's located on vk_auth_window form. So in the code I call vk_auth_window.WebBrowser1.Navigate(vkauthurl). If authentication is successful, I silently get token, but if user is not authenticated a form vk_auth_window is showed to them to enter username and password. To check this I catch _DocumentComplete event and check for the right URL. I need no other code being executed until the user finished authentication or closed authentication form. ShowDialog() does the trick, but it somehow hides cursor from username and password fields in WebBrowser control. So I introduced a variable Dim showform as Boolean=True in and set it to False from the _DocumenComplete event and in the main code I use infinite loop.
While showform
System.Threading.Thread.Sleep(100)
Application.DoEvents()
End While
However it makes userinput slow due to thread sleeps. And If i remove them, it loads CPU quite a lot. Is there a better way to wait for form to close? What is it?
View 1 Replies
Apr 18, 2011
I have a new developer that is calling Showdialog (in VB.NET) on a Windows Forms form without first creating an instance of the form.How is this possible? I don't see a shared method for ShowDialog...
I'm not crazy about this approach either as it seems to me that the dialog will not be disposed until the application exits.What am I missing? Is this a new best practice?OK, Form2 is just a blank form.Public Class Form1 Private Sub Button1_Click(ByVal sender As System.Object,
ByVal e As System.EventArgs) Handles Button1.Click
Form2.ShowDialog()
End Sub
End Class
View 1 Replies
Sep 10, 2010
So you know how when you call "Form.ShowDialog" from where ever you call it, it blocks until the form being displayed closes. And then the function returns whatever result it was.I want to know how to block like, but without a form, yet still have the "main ui thread".Basically I have this long process that needs to thread out and do several things... and it's heavily event based. It jumps between two threads, the main ui thread, and it's own background thread. The main ui thread needs to have access so that I can randomly open different dialog boxes for things... sometimes they're just windows asking to hit OK or Cancel to continue, others it's to perform some action, etc etc.
But there is NO central form related to it. It's a complete background thread running that randomly hops over to the main ui thread for things.Right now I have this class I designed called lets say "DoJobProcessor". On it is a function called "BeginDoJob" that threads off from the thread pool... when ever I need to jump back I use a ManualResetEvent to block on the background thread, jump over to to the main thread with "invoke" and passing a reference to the MRE, then release the block when done there and continue on on this background thread.
All while this is going on I just set the form I'm trying to block the main ui thread from managing by just setting its Enabled property false.It all feels just messy and annoying... and I was just writing something using ShowDialog and I was like... HEY, what if I could block this BeginDoJob method, hi-jack the main ui thread, then let that function return the result when done instead of having this "Complete" event with the return value in it. It's obviously possible because ShowDialog does it, but I don't know how.
This way the job I'm performing isn't always waiting for the main ui thread, instead its the other way around... the ui thread waiting for it, the way it aught to be. Show something, branch off do some stuff and just idle the display while it does it, come back show something else, branch off and just idle while it does that.
View 6 Replies
Jun 21, 2010
I have a form that is called w/ ShowDialog. Inside that form, I want to pop a message box to ask the user a question, but it doesn't show.[code]
View 2 Replies
May 17, 2009
I have problems with a form and load event.My form manage items that can be added, deleted or modified. In load code, I initialize all vars to cero. This is OK to be ready to add items.
My problem is with modify and delete. To carry this, I must load vars from a source. So, in my foreing code I have this:
[Code]...
My problem is that when showdialog is called, all data which were loaded from duplicar funct is put again to cero. How can I avoid this and load correct data into the form.
View 2 Replies
Feb 24, 2009
I am writing an application in VB2008 with several forms. From Form1 I open a new form with me.hide() and then form2.showdialog(). The system works but in form2 the application runs without screendisplay until the program waits for a user input. So first all databases are processed. Meanwhile no screen is visible for the user. Sometimes this takes about 5 seconds. I would like the user to see the build up screen directly.
View 9 Replies
Feb 11, 2011
I want to open a form as modal without using showdialog()Problem with showdialog() is we can not open the form as mdi child with it. i want to open few forms as modal but as mdi child forms. but i want to make sure user cannot go anywhere else without closing thst form.if we set parent form enabled = false then i can not set it as mdi child otherwise that form also becomes enabled=false.
if we write showdialog() then so many form icons will appear on taskbar. it we open as mdi child then only one icon appear i don't want to appear so many icons on taskbar so i want to open as mdi child but as modal
for eg. Mainform = mdi form
from mainform open formA = as mdi child of main form (but modal)
from formA open formB as child (modal)
from formB open formC as child (modal). if i use showdialog() then so many form icons on taskbar.
h2007
View 4 Replies
Mar 7, 2009
im running this code to load a form and call a public method inside it:
vb
[b] newForm.Show()[/b]
Call newForm.editToolStripButton_Click(sender, e)
but when i use form SHOWDIALOG method it doesnt execute
Call newForm.editToolStripButton_Click(sender, e)
View 11 Replies
Jul 24, 2009
I have a custom UserControl that I am hosting inside a FlowLayoutPanel. Each time that I run the application the control will disappear off the hosting form's design view. I have to close the form's design view and then reopen it each time. The control is not getting removed in any way, just isn't being shown.
Edit, alright this got a bit weirder. Only the first usercontrol that I put into the FlowLayoutPanel disappears. This problem also happens on a project Build and Rebuild.
View 8 Replies
Dec 8, 2011
I have a report (vb.net - rdlc) and I have two buttons - preview (which brings up a preview window) and print which allows me to print the report directly to my default printer with no interface whatso ever.When I call the print the calling form disappears or at least goes behind any other open windows - ie if I have MS word open my whole programme would go behind word and I loose focus)I found the code on the net to print directly and it is basically creating a stream to do the printing. [code]
View 3 Replies
Oct 12, 2009
I am creating a VB program that has a Main class, and 4 windows forms. Each of the forms has a back and a next button to navigate trough the forms. The problem is that when I hit next (Here is the code)
Private Sub continueButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles continueButton.Click
VS 2008 Remember Textbox Text when Form reopens
View 8 Replies
Nov 14, 2009
I am making a program for easily entering maths symbols. For entering the powers, I superscipted the text in richtext box, but whenver I use another symbol, the effect of superscripting disappears and the text becomes in its original form
[Code]...
View 6 Replies
May 23, 2012
im using visual basic.net and this is my problem i have 2 form which have a two datagridview . when i update the datagridview in the form 2 its working fine and when i exit it in the form 1 its also update , but when im trying to to click again the edit button(from form 1) the program is automatically exit or crash.
the code from my form2 exit button
form1.showdialog
me.close
form1 edit button
[Code].....
View 4 Replies
Apr 20, 2010
I've come across a situation where I try to run a simple line of code in a method Dim res As DialogResult = frmOptions.ShowDialog()but nothing happens. The dialog box will not appear. If I run this method from another location in the code it executes fine (i.e. displays the form in dialog mode and code executes fine thereafter). Hence, it may be the way in which I arrive at this code that is causing my problem, but I cannot see to find what is wrong.
When I pause the debugger the line of code is highlighted in green but I can't see to step over it or into it what may cause this to happen, or what I should be looking for that might be causing the problem??
View 2 Replies
Apr 7, 2009
Dim res As DialogResult = frmOptions.ShowDialog()but nothing happens. The dialog box will not appear. If I run this method from another location in the code it executes fine (i.e. displays the form in dialog mode and code executes fine thereafter). Hence, it may be the way in which I arrive at this code that is causing my problem, but I cannot see to find what is wrong.
View 8 Replies
Jul 18, 2011
I have a VB.NET 2010 Forms Application which includes a form with a textbox, and two buttons which I call from the main form using .ShowDialog
I've messed with something such that I can no longer prevent the dialog from closing when the user clicks the Ok button but has entered invalid information.
Here is the handler for the OK button's click event:
Private Sub cmdOK_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdOK.Click
If SomethingIsWrongWithWhatTheUserEntered Then
[Code]......
View 6 Replies
Mar 17, 2012
I have an outlook application, whenever the user receive a new mail I show him a form and some controls
The user needs to insert information and close the form. Sometimes the user is not near his machine so whenever there is a new mail I am adding new controls and modify the child size.
It has been successful using the Form.show() method but not in showdialog() i cant add controls and change the form size can someone please help on the subject?
[Code]...
View 8 Replies
May 24, 2012
In a large old application I have to fix, I have two forms, like in the image (that is a Notepad example)
When I leave (with mouse cursor) my small(Y) form's area, that form will "disappear", some like I'd clicked on the big form and activated it.
But I didn't click on X, neither the X caption is active, however the small Y form goes backward and is not visible anymore.
How to track the problem?
Any of Resize, Activated, Deactivate, LostFocus, GotFocus, GiveFeedback, MdiChildActivate is not tracked on any of both forms when I leave the Y area...
View 4 Replies
Apr 4, 2011
1) Main form (a) calls form (b), form (b) calls form (c).
2) Form (a) uses button sub "end", form (b), (c) etc. uses button sub "me.close".
3) Form (b), (c) etc. can also use a "listbox" select to call out of tree structure forms using "showdialog"
4) Main form and present form not in any "listbox".
5) After calling (3) deep a circle form call is possible!
6) I get exceptions when a form calls an "open" form; "visible = false", "close" does not work!
View 3 Replies
Apr 26, 2011
The site is a buy/sell site and the page the code comes from is the "add product" page.
The problem is that the session("change") becomes nothing by some reason, i cant find any errors.The payment.aspx have a button that sends me back to the page with a session("change"). The reason i see the problem is that i when i try to edit something the category gets restetted to the first in the list. and when i debug i see that the session is nothing, though it should be something
Heres the code:
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles BtnSubmit.Click
If Not stats > 0 Then
[Code].....
View 1 Replies
