Error In Using " Form.showdialog" With Vb 10?
Apr 4, 2011
1) Main form (a) calls form (b), form (b) calls form (c).
2) Form (a) uses button sub "end", form (b), (c) etc. uses button sub "me.close".
3) Form (b), (c) etc. can also use a "listbox" select to call out of tree structure forms using "showdialog"
4) Main form and present form not in any "listbox".
5) After calling (3) deep a circle form call is possible!
6) I get exceptions when a form calls an "open" form; "visible = false", "close" does not work!
View 3 Replies
ADVERTISEMENT
Mar 28, 2011
I have a form being called form several forms using ShowDialog().
1. Is there a way for called form to know which form called it by receiving a code or key from the calling form?
2. The calling form has a gridview. How can the called form pick up a column's value from the currently highlighted row in gridview in the calling form?
View 4 Replies
Sep 23, 2011
I am teaching myself VB.Net at the moment but seem to be doing something wrong with ShowDialog. It pops up twice when I run the program. I do not get a compile error. [Code]
View 10 Replies
Aug 7, 2009
I'm having an interesting issue that I can't reproduce on a different project, but can consistently on this one. I have no clue what might be causing it, but am hoping that someone may have seen it before.
I have a main form, from which I run a series of checks. On this form, I have a listview control. Because of some issues with the refreshing of this listview control, I had to create my own messagebox. It's just a form that displays some text ( it also happens to look nicer than MsgBox; in my opinion, anyways ). It's been working great for months, until recently.
My problem is that on my main form's load event, I run this check, which returns an error within a try/catch block. I then call my custom messagebox with a message. It in turns calls it's ShowDialog() function.
In any other situation ( after the main form has been loaded ), I have no problems. The messagebox goes on the screen and behaves appropriately ( ie: waits for my input and acts as a modal dialog ( stops execution of my main form's thread ) ). However, on this onload event, my messagebox comes up and goes away almost immediately afterwards.
I've traced it all the way to the showdialog() call. For no explicable reason, it appears to skip right over this call, without me doing anything on the form.
Here's what the inner trace looks like ( when I put a breakpoint on the onclosing event for this messagebox form ):
CODE:
View 10 Replies
Jan 5, 2012
Quote:
Originally Posted by kaliman79912
Quick note: Close does not dispose of the form if it was displayed using .ShowDialog, but I guess this is not the case.
I did not want to hijack the other thread [URL] but would like to have this clarified for me.
View 5 Replies
Feb 23, 2009
I am trying to have my .NET application interop with an object created in VB6. The VB6 application has a ShowDialog method with the following signature:
Public Sub ShowDialog (Optional fParent)
And inside the code, there is the following lines of
If Not IsMissing(fParent) Then
[code]......
View 6 Replies
Feb 24, 2009
I have a form that I am using to search for records in a dataset, it has a text box for entry of the search criteria and a 'Search' button to initiate the editing of the entry and .Filter on the BindingSource. This is one form in a project with many, when I show it using .ShowDialog it always disappears, (not visible and not loaded) after the 'Search' button is clicked, I have stepped through and there is no .Hide or .Close that it encounters, it performs all of the logic correctly but control is returned to the main form it was shown from. When I use the .Show method, I do not have this problem.
View 5 Replies
Nov 4, 2010
I converted this app from VB6. I have 2 forms. Form1 instantiates Form2 via a Menu Item.I am having trouble getting Form2 to end when clicking close (X). If Form2 is 'idle' it closes fine; but if I am in a loop processing anything all the events fire, but it continues processing in Form2. I've tried messing with Dispose, Close, Application.Exit, Application.ExitThread. My last attempt was creating my own event to fire back to Form1 and dispose Form2 -- and it hits it but Form2 is still running. What is the deal? BTW if I use just Show vs ShowDialog -- Form2 just blinks and disappears.[code]
View 2 Replies
Jan 21, 2009
I converted this app from VB6. I have 2 forms. Form1 instantiates Form2 via a Menu Item.I am having trouble getting Form2 to end when clicking close (X). If Form2 is 'idle' it closes fine; but if I am in a loop processing anything all the events fire, but it continues processing in Form2. I've tried messing with Dispose, Close, Application.Exit,pplication.ExitThread. My last attempt was creating my own event to fire back to Form1 and dispose Form2 -- and it hits it but Form2 is still running. What is the deal? BTW if I use just Show vs ShowDialog -- Form2 just blinks and disappears.
Form1 does this
Dim f2 as Import
:
[code].....
View 6 Replies
Sep 8, 2010
I have three form First Form is MDi form and Second Form Is Child Form and third Form Is small form.The small form conatin DataGridView searcher for name and I want whe I press the Event Mous Click he copy value from cell"column" of DataGridView to Child Form..[code]
View 7 Replies
May 9, 2012
In my program I use WebBrowser control for OAuth. It's located on vk_auth_window form. So in the code I call vk_auth_window.WebBrowser1.Navigate(vkauthurl). If authentication is successful, I silently get token, but if user is not authenticated a form vk_auth_window is showed to them to enter username and password. To check this I catch _DocumentComplete event and check for the right URL. I need no other code being executed until the user finished authentication or closed authentication form. ShowDialog() does the trick, but it somehow hides cursor from username and password fields in WebBrowser control. So I introduced a variable Dim showform as Boolean=True in and set it to False from the _DocumenComplete event and in the main code I use infinite loop.
While showform
System.Threading.Thread.Sleep(100)
Application.DoEvents()
End While
However it makes userinput slow due to thread sleeps. And If i remove them, it loads CPU quite a lot. Is there a better way to wait for form to close? What is it?
View 1 Replies
Apr 18, 2011
I have a new developer that is calling Showdialog (in VB.NET) on a Windows Forms form without first creating an instance of the form.How is this possible? I don't see a shared method for ShowDialog...
I'm not crazy about this approach either as it seems to me that the dialog will not be disposed until the application exits.What am I missing? Is this a new best practice?OK, Form2 is just a blank form.Public Class Form1 Private Sub Button1_Click(ByVal sender As System.Object,
ByVal e As System.EventArgs) Handles Button1.Click
Form2.ShowDialog()
End Sub
End Class
View 1 Replies
Sep 10, 2010
So you know how when you call "Form.ShowDialog" from where ever you call it, it blocks until the form being displayed closes. And then the function returns whatever result it was.I want to know how to block like, but without a form, yet still have the "main ui thread".Basically I have this long process that needs to thread out and do several things... and it's heavily event based. It jumps between two threads, the main ui thread, and it's own background thread. The main ui thread needs to have access so that I can randomly open different dialog boxes for things... sometimes they're just windows asking to hit OK or Cancel to continue, others it's to perform some action, etc etc.
But there is NO central form related to it. It's a complete background thread running that randomly hops over to the main ui thread for things.Right now I have this class I designed called lets say "DoJobProcessor". On it is a function called "BeginDoJob" that threads off from the thread pool... when ever I need to jump back I use a ManualResetEvent to block on the background thread, jump over to to the main thread with "invoke" and passing a reference to the MRE, then release the block when done there and continue on on this background thread.
All while this is going on I just set the form I'm trying to block the main ui thread from managing by just setting its Enabled property false.It all feels just messy and annoying... and I was just writing something using ShowDialog and I was like... HEY, what if I could block this BeginDoJob method, hi-jack the main ui thread, then let that function return the result when done instead of having this "Complete" event with the return value in it. It's obviously possible because ShowDialog does it, but I don't know how.
This way the job I'm performing isn't always waiting for the main ui thread, instead its the other way around... the ui thread waiting for it, the way it aught to be. Show something, branch off do some stuff and just idle the display while it does it, come back show something else, branch off and just idle while it does that.
View 6 Replies
Jun 21, 2010
I have a form that is called w/ ShowDialog. Inside that form, I want to pop a message box to ask the user a question, but it doesn't show.[code]
View 2 Replies
May 17, 2009
I have problems with a form and load event.My form manage items that can be added, deleted or modified. In load code, I initialize all vars to cero. This is OK to be ready to add items.
My problem is with modify and delete. To carry this, I must load vars from a source. So, in my foreing code I have this:
[Code]...
My problem is that when showdialog is called, all data which were loaded from duplicar funct is put again to cero. How can I avoid this and load correct data into the form.
View 2 Replies
Feb 24, 2009
I am writing an application in VB2008 with several forms. From Form1 I open a new form with me.hide() and then form2.showdialog(). The system works but in form2 the application runs without screendisplay until the program waits for a user input. So first all databases are processed. Meanwhile no screen is visible for the user. Sometimes this takes about 5 seconds. I would like the user to see the build up screen directly.
View 9 Replies
Feb 11, 2011
I want to open a form as modal without using showdialog()Problem with showdialog() is we can not open the form as mdi child with it. i want to open few forms as modal but as mdi child forms. but i want to make sure user cannot go anywhere else without closing thst form.if we set parent form enabled = false then i can not set it as mdi child otherwise that form also becomes enabled=false.
if we write showdialog() then so many form icons will appear on taskbar. it we open as mdi child then only one icon appear i don't want to appear so many icons on taskbar so i want to open as mdi child but as modal
for eg. Mainform = mdi form
from mainform open formA = as mdi child of main form (but modal)
from formA open formB as child (modal)
from formB open formC as child (modal). if i use showdialog() then so many form icons on taskbar.
h2007
View 4 Replies
Mar 7, 2009
im running this code to load a form and call a public method inside it:
vb
[b] newForm.Show()[/b]
Call newForm.editToolStripButton_Click(sender, e)
but when i use form SHOWDIALOG method it doesnt execute
Call newForm.editToolStripButton_Click(sender, e)
View 11 Replies
Oct 12, 2009
I am creating a VB program that has a Main class, and 4 windows forms. Each of the forms has a back and a next button to navigate trough the forms. The problem is that when I hit next (Here is the code)
Private Sub continueButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles continueButton.Click
VS 2008 Remember Textbox Text when Form reopens
View 8 Replies
May 23, 2012
im using visual basic.net and this is my problem i have 2 form which have a two datagridview . when i update the datagridview in the form 2 its working fine and when i exit it in the form 1 its also update , but when im trying to to click again the edit button(from form 1) the program is automatically exit or crash.
the code from my form2 exit button
form1.showdialog
me.close
form1 edit button
[Code].....
View 4 Replies
Apr 20, 2010
I've come across a situation where I try to run a simple line of code in a method Dim res As DialogResult = frmOptions.ShowDialog()but nothing happens. The dialog box will not appear. If I run this method from another location in the code it executes fine (i.e. displays the form in dialog mode and code executes fine thereafter). Hence, it may be the way in which I arrive at this code that is causing my problem, but I cannot see to find what is wrong.
When I pause the debugger the line of code is highlighted in green but I can't see to step over it or into it what may cause this to happen, or what I should be looking for that might be causing the problem??
View 2 Replies
Apr 7, 2009
Dim res As DialogResult = frmOptions.ShowDialog()but nothing happens. The dialog box will not appear. If I run this method from another location in the code it executes fine (i.e. displays the form in dialog mode and code executes fine thereafter). Hence, it may be the way in which I arrive at this code that is causing my problem, but I cannot see to find what is wrong.
View 8 Replies
Jul 18, 2011
I have a VB.NET 2010 Forms Application which includes a form with a textbox, and two buttons which I call from the main form using .ShowDialog
I've messed with something such that I can no longer prevent the dialog from closing when the user clicks the Ok button but has entered invalid information.
Here is the handler for the OK button's click event:
Private Sub cmdOK_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdOK.Click
If SomethingIsWrongWithWhatTheUserEntered Then
[Code]......
View 6 Replies
Mar 17, 2012
I have an outlook application, whenever the user receive a new mail I show him a form and some controls
The user needs to insert information and close the form. Sometimes the user is not near his machine so whenever there is a new mail I am adding new controls and modify the child size.
It has been successful using the Form.show() method but not in showdialog() i cant add controls and change the form size can someone please help on the subject?
[Code]...
View 8 Replies
Aug 11, 2009
I have a project that reference from leadtools 16.5, and after that, i want to run my project..i see am error like it " An error occurred creating the form. See Exception.InnerException for details. The error is: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. im using vb 2008 pro
View 6 Replies
Sep 20, 2010
I'm having issues with program that uses radio buttons to select between 2 different forms, that are displayed using showDialog. When I click a button to perform calculations in either form, it will act normally and display the information, however when I click the Clear button to begin a new calculation, the form will close, does anyone know why?
View 1 Replies
Jul 16, 2010
where I am starting another thread which opens a form. Succinctly, it is an animated "Please wait.. processing" type of form. The issue is that I want to make this form a child form of the parent (main thread or main GUI) when I open it.The issue is that I prefer to use frmProcessing.ShowDialog(frmMain) instead of just frmProcessing.Show, because of form disappearing issues. It, of course, gives me an error of illegal cross thread operation. My question is, how do I perform frmProcessing.ShowDialog(frmMain) to show from within another thread, that the newly opened form is actually a child of the main thread. Is there a better way for me to make a small processing form telling the user to be patient while background processes are working? [code]
View 2 Replies
Feb 22, 2009
When I run this code, it does not seem to open the OpenFileDiaplog diaplg box, or if it does, it closes it immediately, and I get at index out of bounds exception at the " infileStream = getFile.OpenFile()"This exact same code works without problem in another application I am building. So maybe its something about the IDE environment?I think, but am not certain, that this code worked in 2003 .net. I then used the VS wizard to automatically convert to the 2005 environment that I am now coding in.
Dim infileStream As Stream
Dim getFile As New OpenFileDialog
getFile.Filter = "All files (*.*)|*.*"
[Code]....
View 8 Replies
Nov 16, 2009
I have a form that uses another class to do some work, and the class throws events regarding text updates, and the main form handles them and passes them on the the StatusForm, which displays the process progress via usercontrol. Using a BackgroundWorker and Events I'm able to update the usercontrol on the Status form if I use frmStatus.Show(). Unfortunately, the Status form should use ShowDialog() so it can't lose focus while the application is processing data. Now, for some reason the UserControl will not update if I use ShowDialog(). Any ideas?
View 7 Replies
Sep 28, 2011
I wanna overload the ShowDilog for my form. I wanted to clarify whether the Owner should be passed as Value or Reference.
View 2 Replies
