VS 2005 Form Disappears When Reloading?
Jun 18, 2009
This happened to be once awhile ago and I thought I had the solution, but apparently I don't. Very rare, but what happens is, I'll start a new project, build my controls on the form, go into the code window and write some code. I'll save this all out, but when I reload the project, the code window comes up OK, but the design window is just gone. The code for the form and all the controls is still there in the form.designer window, but the form itself just will not appear, and there is no icon for it over in the Solution Explorer to click on
View 1 Replies
ADVERTISEMENT
May 11, 2010
I have declared a webbrowser control on my form and assigned a URI to it upon load. This works fine and the webbrowser.documenttext is set to the html of the document. What I need to do is on the second run through of the program it needs to refresh the page to check if the code is still the same. I have the following code set but it appears as though after a refresh it is not working because if the code is changed it still sees the old code in webbrowser.documenttext.
browserRedgis.Refresh()
browserRedsnap.Refresh()
browserParks.Refresh()
[code]....
View 1 Replies
Mar 16, 2010
I have a datagridview control. I want to save the rows and then restore them the next time I run the program.
How do I write the rows out to an XML file?
I know how to fill the rows from an XML file. But when I've done so I can't add any more rows. It gives the following exception when I try: Rows cannot be programmatically added to the DataGridView's rows collection when the control is data-bound. What can I do about this?
Or is there an easier way to save and restore the rows?
View 1 Replies
Mar 11, 2010
I want, when I show Form2, the form1 should be displayed in background. And when I close Form2, the form1 should be updated or starting complete new Form1. I do this but there are two tabs of Form1 in TaskBar. One is background display Form1 and another is updated. I want only one Form to be displayed.
View 9 Replies
Jan 17, 2012
I've been working on this game the past few days, a simple game where two people control different tanks, and shoot each other, very basic so far.The problem I have is when one player is dead. I have the form recognizing each players death by using this code (It's within a timer subroutine)
'Player One Dead
If intPlayerOneHealth <= 0 Then
btnReplay.Visible = True
End If
[code]....
and that code is replicated for every key pressed (Arrow keys, WASD, e, and end). Those booleans are handled in a timer subroutine, where if the boolean is true, they will move/shoot. (Turning the booleans to false is done in the 'Private Sub KeysUp' subroutine)
TL;DR How do I get the game to restart itself when a player dies and hits the replay button?
P.S. I've tried 'Me.Refresh()' as well, and that didn't do anything
View 3 Replies
Feb 17, 2012
I save all the form controls(texboxes,Labels) with name and location in a XML file.
I want to retrive the XML file into a form(Reloading) with the same controls.
View 7 Replies
Jun 27, 2011
iam beginner to vb. i hav three forms,mainform,items,and additems.mainform having 2 panels,panel1 and panel2.and panel1 contains item button & a close button.when i click item button the panel1 of items form is loading on to the panel2 of mainform. my problem is when i click Close button it clear the panel2 of mainform,but after that when i click Item button it does not load the panel1 of Items form on to mainform panel2.
View 5 Replies
Jun 27, 2009
On the Form_Closing I intend to just hide the form but somehow I need to reload/refresh the form as when it was just loaded the first time, could I just call its Load event to achieve it?
View 4 Replies
Aug 7, 2009
i am currently trying to create an expenses calculator, the sort that includes all your monthly outgoings and give you a total. I would like to be able to fill the form in the save it + reload it when i run the program again, what is the best way to do this ?
View 5 Replies
Apr 4, 2011
For a while i have been playing a guessing game with this line of code.
If Sdown = True And Shooter.Top >= Me.ClientRectangle.Height Then
Shooter.top += Shooterspeed
End If
Basically i have a shooter on the form and whenever i press the down key the shooter moves down the form and disappears off of the bottom of the form. I have been trying to get this to stop for some while.
View 5 Replies
Sep 30, 2008
I am in the process of converting a Visual Studio 2003 project to Visual Studio 2005. Part of this effort also includes replacing some ComponentOne controls with .NET controls.
[Code]...
View 3 Replies
Nov 1, 2009
I submitted the same question a few minutes ago, but so far that hasn't appeared in the thread - I wonder why/ - I used the HTML to rite the code I used. When I Click the F5 / Strat Debug on menu the DOS-Based form appears and disappears immediately. I am able to run a DOS-Based program in the computer, I checked this after the Sample Console Application failed to run. The Code I used is given within the Brackets(System.Console.WriteLine("Hello World")).
View 2 Replies
Feb 24, 2009
I have a form that I am using to search for records in a dataset, it has a text box for entry of the search criteria and a 'Search' button to initiate the editing of the entry and .Filter on the BindingSource. This is one form in a project with many, when I show it using .ShowDialog it always disappears, (not visible and not loaded) after the 'Search' button is clicked, I have stepped through and there is no .Hide or .Close that it encounters, it performs all of the logic correctly but control is returned to the main form it was shown from. When I use the .Show method, I do not have this problem.
View 5 Replies
Jul 30, 2010
I am working on a web browser with the url bar in a tool strip.I have noticed that whenever I resized it, the textbox stayed the same.
[code]...
View 1 Replies
Jul 24, 2009
I have a custom UserControl that I am hosting inside a FlowLayoutPanel. Each time that I run the application the control will disappear off the hosting form's design view. I have to close the form's design view and then reopen it each time. The control is not getting removed in any way, just isn't being shown.
Edit, alright this got a bit weirder. Only the first usercontrol that I put into the FlowLayoutPanel disappears. This problem also happens on a project Build and Rebuild.
View 8 Replies
Dec 8, 2011
I have a report (vb.net - rdlc) and I have two buttons - preview (which brings up a preview window) and print which allows me to print the report directly to my default printer with no interface whatso ever.When I call the print the calling form disappears or at least goes behind any other open windows - ie if I have MS word open my whole programme would go behind word and I loose focus)I found the code on the net to print directly and it is basically creating a stream to do the printing. [code]
View 3 Replies
Nov 14, 2009
I am making a program for easily entering maths symbols. For entering the powers, I superscipted the text in richtext box, but whenver I use another symbol, the effect of superscripting disappears and the text becomes in its original form
[Code]...
View 6 Replies
May 24, 2012
In a large old application I have to fix, I have two forms, like in the image (that is a Notepad example)
When I leave (with mouse cursor) my small(Y) form's area, that form will "disappear", some like I'd clicked on the big form and activated it.
But I didn't click on X, neither the X caption is active, however the small Y form goes backward and is not visible anymore.
How to track the problem?
Any of Resize, Activated, Deactivate, LostFocus, GotFocus, GiveFeedback, MdiChildActivate is not tracked on any of both forms when I leave the Y area...
View 4 Replies
Jun 30, 2010
If we make any changes to the registry, Its necessary to restart the system. can we make it without restarting through program...?
View 7 Replies
Apr 3, 2010
[URL]
I have a GridView, named GridView1 used to getting data from SQL Server Database, because the data from database always changing, I would like to get the new data to display on the GridView1 when a user press the "Fresh Button"
I tried:
GridView1.Refresh() - did not work
Me.Refresh() - did not work
Me.Hide() then Me.Show() did not work
[Code]....
View 3 Replies
Jan 26, 2011
I am trying to place a repeater within a repeater using xml data. I have it working exactly as I want, but the method I have used reloads the data for each repeater. I think I need to cast as an XmlNode but I'll be honest - I have no idea where to start. Here is my code - I'd like to keep everything in the code behind if possible.
[Code]...
View 2 Replies
Apr 10, 2012
I have a gridview control on my asp.net page(vb.net). I also have a "cancel" button, that when pressed, is supposed to clear the gridview of it's current contents.
However whenever the cancel button is pressed, it just reloads the page and the gridview is still there with the same data that I wanted clear.[code]...
View 4 Replies
Apr 27, 2011
I have a listbox, a textbox, and a button. The button populates the textbox with the selected item & value of the listbox. As below:
Protected Sub GetVariables_Click(ByVal sender As Object, ByVal e As EventArgs) Handles GetVariables.Click
Me.txtLetter.Text = lstNames.SelectedItem.ToString & lstNames.SelectedValue.ToString
End Sub
The problem I have, is that when doing this it reloads the page each time. Any way around this?
View 2 Replies
Nov 2, 2010
when im updating my data through a textbox and i save it, i dont automatically show the updated file on the datagrid, here is my code btw, i already tried some code but it aint working
[Code]......
View 2 Replies
Mar 11, 2010
I am new to using databases in applications and i have a code to select data from the database. However, the first time the application starts, new data is inserted into the database which is needed after. But, the data does not appear until the whole application is restarted. How I can refresh the database content.
The current code for selecting the data is:
Imports System.Data.SqlServerCe
Public Class MSSUI
Dim con As SqlCeConnection = New SqlCeConnection(My.Settings.DB1ConnectionString)
Dim cmd As SqlCeCommand
Dim myDA As New SqlCeDataAdapter
[Code] .....
View 10 Replies
Mar 2, 2012
I have created a file say "abcd.xml".I have created this in a device which can be connected to my system and synchronized(which means data from the device can be synched to the database and vice versa).Now when I reset the device all the details in the device is lost but it exist in the file. When we do a reset and do a sync I need to check a condition and if its true I need to load the details from the file to database.This is what I'm supposed to do
[code].....
View 1 Replies
Mar 24, 2010
how i can make it so if somebody enters information to a textbox in a form. how can i make it so when they reopen the application theyre text is there.
View 1 Replies
Mar 19, 2010
I'm working on a software where I need to download an image from the web browser without reloading the image.
View 2 Replies
Nov 11, 2011
Everyting is OK, but when I click on F5, it refresh the page and run the code another time. This means a new record is added to the data base on each F5.This is my code, do you have any advices?
Imports System.Data.OleDb
Partial Class Default2
Inherits System.Web.UI.Page
[code]....
View 2 Replies
Aug 20, 2011
Ok so I have designed a program to figure out commissions for phone sales at my company. Since the devices we sell and their associated prices change over time, I had to make that data within my program dynamic. I have a form within my program (frmprice) that has 160 textboxes - 80 for the devices and 80 for the associated prices. Now I hard coded the .text members with default values for our current stock of phones and prices.
I also added code so whenever that form with the phones and prices (frmprice) closes it saves any changes that have been made to either the phones or prices and when the form loads it overwrites the default data with any data that the user had entered at last run.
HERE is my logic problem. At the very first run the program is overwriting the default hard coded values with "" because no user data has ever been entered before. So when the form with the prices loads, it passes the user entered data from last run which is null because it has never run before. If I test to see if default value <> the user entered data before it executes the code to pass the user entered values it will always test to be true because the user entered data is null at first run. If I test to see if the default value is = to the user data it will always at first run test to be false because there is no user data yet.
HOWEVER once the user entered data is initialized (anytime after the first run) I need the program to pass the user data from the previous runs back in. Just NOT at the first run. Here is the code i am using: (in the code below the variables ending in "val" are the ones that are of the type string and are saved in the application settings) The frmprice_Load Event:
[Code]....
View 3 Replies
