I am trying to have a textbox format a string entered on the click of a button.I have 4 text boxes, each of them represents a time in / time out.I need to be able to enter
box 1 - 345
box 2 - 400
when the button is clicked it changes that to 3:45 and 4:00.all my attempts to use the Format in VB has failed.
how would i go about changing the text property of a button when clicked. Im using panels to switch between what the form shows but when i click the button to switch panels i want the text of the button to change but i cant figure out what property to change and how to go about doing it.
View 2 RepliesAfter I have entered data into 12 textboxes and pressed a button to execute the code, the data from the text boxes goes into a database.I want to clear the information in the text boxes after the button has been clicked, at the moment I have 12 lines of code which are similar to this.
MsgBox("Data Has been Added to The Database")
tbeventId.Clear()
tbtitle.Clear()
tbstartdate.Clear()
tbvenue.Clear()
is there a easier/simpler way to remove all data from the text boxes without using 13lines of code
form1 have four buttons, i want to set a label text in form2 according to which of the button on form1 is clicked.below is what i tried so far.on form1 each of the button click event i made it focus
Private Sub Answerbtn3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Answerbtn3.Click
Me.Focus()
Form2.Show()
and on form 2 load event i have
Private Sub FinalAnswer_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
If Main1.Answerbtn1.Focus Then
Label2.Text = "You choosed option '
[code]....
the above code displays only the first condition ("You choosed option 'A'"") on the label when any of the button is clicked?
I would like to have a label's text recorded into a database when my button is clicked. I do not yet understand the database connection. I have created the db, and have the following
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim Conn As String = "Provider=Microsoft.SQLSERVER.CE.OLEDB.3.5; Data Source=c: empTestDB.sdf;"
Dim tConnection As New OleDb.OleDbConnection(Conn)
[code]....
When I try to test this the .ExecuteNonQuery() becomes highlighted and says the given type name is unrecognized. My table is setup as table1 and the only 2 columns are datetime and temperature. I want the label text to go to temperature and I would like somehow the time the temperature was taken to go into the datetime field. I had the provider=microsoft.jet.oledb.4.0, but I changed it since I thought this was the one to use.
I am here by to ask help on enhancing messageboxs. How is the way to Display a picture(like a JPG file) inside a messagebox along with text when a button is clicked?
View 9 RepliesI'm trying to do is make a program to where when you click an option, a text outputs for each button clicked, the general design looks like this:
That's just a beginning, since the whole rest of the thing will be the same concept pretty much, and what I want to have it do is, like stated earlier, once the option is chosen, a text output, like this:
I know there is an alternative to solving that, but it will take me 10x more time, and that is, creating a new textbox, setting the visibility to False, and typing what I want outputted in that text box, then putting: RichTextBox1 = TextBox1.Text
I know that works, and gives me my output, but I just wanted to know if there was any other way but that.
I have a form that I am adding a set of buttons to. I am adding an event to those buttons. I need this event to function slightly to determine what button was pressed.
I need the button to simply set a string variable equal to the clicked buttons text so I can determine what button was pressed.
How can this be accomplished?
''Adding the buttons''
For Each dr In dtMenus
Dim strMenuName As String
strMenuName = dr.Item("strMenuName").ToString
[CODE]...
I tried to update the button text on a form from a backgroundworker.do_work event, and it failed, with the usual cross-thread exception message.However, by pure chance, I also tried to update text in a system.windows.form.toolstripstatuslabel also from this backgroundworker.do_work event, and it DOES work. Question: why is this? Is it perhaps because theres some kind of implicit shared behaviour with system.windows.form.toolstripstatuslabel?
View 4 RepliesUsing 2 forms how would I click one button, from another form? ie In VB 4,5,6, I would used to do it as:-
Form 1:
private sub Command1_Click()
msgbox "Say Hello"
End Sub[code].....
If I clicked the button in form2, it would automaticlly, click the button in form1. Do I, do it the same way in VB Express or has it changed?
I have numerous buttons on a form, one each to select a playing card (52 buttons). When the Card(button) is selected I want to highlight it by changing the border from black to Red, then if reclicked from change back from red to black, easy enough (if then else). So that I do not have to copy this code 52 times I wanted to create a module as follows:
Sub ChangeButtonBorderColor(ByRef ButtonName)
If (Equals(ButtonName.BorderBrush, Brushes.Red)) Then
ButtonName.BorderBrush = Brushes.Black
[code]....
How to make a link button visible after another button has been clicked in asp.net(vb) in button_click()
it says error as "Object reference not set to an instance of an object."
i've done this in my code
Protected Sub InsertButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim receipt As LinkButton = FormView1.FindControl("LinkButton1")
' receipt.Enabled = "true"
[Code].....
I have already done the creation of button and the dragging of button at runtime already.But now i need to know how do i save the last dragged button on the form and also detect the name of the last clicked button.so lets say i now drag a button to coordinates 25,254. so when i exit the form and the next time i launch it, the button will still be at 25,254. and this one will go on for the number of button i created like 100. so when i launch the form the 100 button will be at the exact position where i last saved them.the second part is lets say i created button1 and button2 on the form in runtime. so when i clicked the first button, it should display button1. and if i clicked on button 2, it should say button2. same goes for like 100buttons.
[code]...
i have a form with 10 designated slots for letter to be entered (Like the free letter spaces on hangman), above these are 10 adjacent labels with a full stop "." as the text value, now i have created a button, Q to detect whether there is a. in the first box, and if there is enter the letter Q (Letter1.text = "Q"), elseif check the same for the second box. Now my problem is when i click the button, it still does nothing and letter 1 remains "." instead of "Q". also how would i end this string of else ifs? as in what if every text box is full then do what?
View 2 RepliesI am developing an application in which there are more than one buttons and i want to add some code on the click of every button, But I wished to know that which button has to be clicked by the user and after that some code will be executed and that code will be different for different buttons.
View 1 RepliesI have partially coded a project seen below:
Public Class frmBroadwaytickets
'Defining the cost per ticket
Const _cdecticketprice As Decimal = 153.5D
[Code]....
My btndisplay cost works, but my btnexitprogram does not close the application when clicked. I've ensured the button is correctly named and enabled. But when I click it does not close out, I use this simple code in other programs and it works.
I have a calculate button that, if clicked more than once adds the total of what I previously had to the new total as I am using a loop. I was thinking that I could get around this by only allowing the button to be clicked once, and if the user attempts to do this more than once a messagebox will appear saying that you can only calculate the price once and the form resets but i can't seem to get any code working.
View 4 Replieshow can i check if a command button is clicked in vb.net 2003?
View 1 Replieshow can I get this .bat command to run after my button is clicked I can make it like, "Run a certain .bat when button is clicked" , but I don't want that because people can go inside my .bat and hack my IP. So I was wondering is there a way I can put that .bat command into my VB 2010 Express
[Code]...
Private Sub Button_Click() Handles Button1.Click, Button2.Click, Button3.Click
MsgBox()
End Sub
[code].....
how can you make a song play in vb 2005? I want it to play after a button is clicked.
View 2 RepliesI need an example of a code that disables its function of the button when its pushed more than 1 time..
how can i arange that?
so an example:
2 buttons 1 label
when i press "button 1", label get a number 1
when i press button 1 again, label is still number 1
when i press button 2 and after that button 1. the label got the number 2!
I am working on a project and i am required to set up a 2d arrray of buttons. This part is fine and working. My problem is detecting the name of a button when it is clicked. I have a feeling it has something to do with sender, but i just can't crack it. If you need more info or code, then just ask.
View 10 RepliesI'm returning a database query into a List object and using that list object to fill the X and Y axes of my chart as seen below. (_runData is a "List(of DatabaseTableName)" style Object filled with the results of my query.
Primary_Chart.Series(0).Points.DataBindXY(_runData, "DateTime", _runData, "UPPER_PRESSURE")
My Datetime field is returning as a Serial Number (i.e. 40116.76111) so I want to format the X Axis to display the field more readably. Enter my problem code.
[code].....
I need to set a variable , say Flag=1 when a button is clicked.
How do i set the Flag=1 and this variable can be used in OTHER application? Meaning this Flag is set in Program A, then Program B will use this variable (always updated value). I wrote application in VB.NET.
I think app.config isn't that good (use the add key="" value "" ) because when program is executing, it will lock the app.config file.
This Flag variable will be changed according user input (button click) and i try to make this variable use across other application. How to do this?
I have an asp button which I am using in 2 different places (appending to a new place and adding a class using jquery under certain conditions). I need to slightly alter the function that runs when this button is clicked depending on whether or not this button has a given class. Is this possible? So something like this...[code].....
View 1 RepliesI have the following radion button in VB.NET
<asp:RadioButtonList ID="rbedit" runat="server" RepeatDirection="horizontal" >
<asp:ListItem Value="1" >Yes</asp:ListItem>
<asp:ListItem Value="0" >No</asp:ListItem>
</asp:RadioButtonList></td>
I need to figure what button the user clicked on and then set a variable with that value.How would I go about doing this?
when Button1 is clicked I want the cursor to change to the Hourglass cursor.
View 4 RepliesHow can i check if a command button is clicked in vb.net 2003?
View 2 RepliesI have two text boxes (txt1, txt2) and an exit button (btnExit)In txt1.Leave event; i have some validations. If validation fails then I keep the fous on txt1.If btnExit is clicked then I do not want to execute the validation and instead close the application.. How do I do it?
View 4 Replies