I have a label in my form which displays the text-content stored in a text file. However it is not able to display special characters like ", ', : etc. Instead it just puts a small rectangular box (same size as that of the text).
How do I get them to display these characters? Should I not use text files in this case or do I have to turn on some control-properties?
I have made a report in crystal reports 10 in that i want the field only displays data without the special characters like its showing 11-00-3200-002-37 but i want it would show the field like this 1100320000237 without (-). so does any one help me to do this in crystal reports 10 not in application or software code.
View 5 RepliesEssentially I am trying to replicate the Windows 7 (In-Windows) activation key TextBox form. The Form where it will auto capitalize letters, remove or deny all non alphanumeric characters except dashes every 5 characters that will be auto-input.I assume this can be done with a fairly complicated replacement Regular Expression but I cannot seem to create one to fit the needs.
This is an Example of what I have right now, but it creates an infinite loop as it removes all characters including dashes, than adds a dash, which changes the text and removes the dash again.
[Code]...
i have been trying to remove special characters. i am not able to remove many crlf in middile of the string.
View 3 RepliesI have two textboxes. I type in one of them and the text gets copied in real time into another textbox. There is one catch. I need to replace specific character with something else.
If I enter a quote " in textbox1, it has to be replaced with " in textbox2.
I started with something like the below code, but obviously this does not work (tried different stuff - this is for demonstration only). In the example below 'a' represents " , and 'b' represents "
Private Sub TextBox1_KeyUp(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox1.KeyUp
TextBox2.Text = TextBox1.Text
[Code]....
I have two labels in my form with two integer values I need to save these labels in an array and when I load the form again I need the saved data appear in two textboxes.
View 4 Repliesexample. i have 2 textboxes and if there empty it says "Incorrect Information", but how do i make it that like when a person enters something into the textbox1 it can be 3 values minimum.. like it could be eather 2 letters 1 number or what ever just more than 3 values (no special characters), and on the password.. 6 values minimum (no special characters).
[Code]...
I've got a program that in a nutshell reads values from a SQL database and writes them to a tab-delimited text file.The issue is that some of the values in the database have special characters (TM, dash, ellipsis, etc.) When written to the text file, the formatting is lost and they come across as junk "â„¢ or â€" etc"
When the value is viewed in the immediate window, before it is written to the txt file, everything looks fine. My guess is that this is an issue of encoding. But, I'm not real sure how to proceed, where to look, or what to look for.Is this ASCII or UTF-8? If it's one of those how do I correct it before it's written to the text file.Here's how I build the text file (where feedStr is a StringBuilder)
objReader = New StreamWriter(filePath)
objReader.Write(feedStr)
objReader.Close()
buildLetter.Append("</head>").AppendLine();
buildLetter.Append("").AppendLine();
buildLetter.Append("<style type="text/css">").AppendLine();
Assume the above contents resides in a file. I want to write a snippet that removes any line which has empty string "" and put escape character before the middle quotations. The final output would be:
buildLetter.Append("</head>").AppendLine();
buildLetter.Append("<style type="text/css">").AppendLine();
The outer " .... " is not considered special chars. The special chars may be single quotation or double quotation. I could run it via find and replace feature of Visual Studio. However, in my case I want it to be written in c# or VB.NET
I have a requirement to connect to a path such as[code]...
Where the first underscore is a space, and the last two underscores are ALT255. I have tried the following, based on some samples I've seen on the web, but it doesn't work[code]...
I have a text file, the file is sent to me, but this file has a particularity, because between characters get special characters, as if the file was a binary file.I put a screenshot. I need to pick up and replace these characters by the character "-", those chracters are at position 13 to 18 on all lines. And sometimes there is a "\n" character that makes it split the line, and this should not happen.
View 2 RepliesI have a datafield [Money] of datatype float.when i input currency value with $,or , it throws an error.How do I allow $ or "," to this field without changing the datatype(I know changing to type money may fix it)
View 3 RepliesI have data that I have to send as xml. There are many characters that are receiving an error. Is there a quick way that I can ignore all these characters?
View 10 RepliesIn C# you can use to ignore the special characters:
string myString = "this is a " string";
that would work as one complete string... in VB, doing that does not work...Anyone know the equivalent of to ignore special characters for VB
I have a code for the validation for special characters but my problem is i cannot use space bar because of included for the special characters.I want to happen is i cannot input special character except for the space bar. it is possible to do that?by the way this is my code:
Private Sub txtlastname_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles txtlastname.KeyPress
Select Case Convert.ToInt32(e.KeyChar)[code].....
I was testing my program, and tried entering @ into a text box, but it didn't work. Is there any way for this to be allowed to be entered?
View 3 RepliesI need to define a regular expression that accepts Alphanumeric and the following special characters:
@#$%&*()-_+][';:?.,!
I've come up with:
string pattern = @"[a-zA-Z0-9@#$%&*+-_(),+':;?.,![]s\/]+$";
But this doesn't seem to be working.
I've been searching on google for a long time and i can't seems to find a code that suits my need.
Heres my problem:
I want to disable all special characters excepted the dot(.) and the underscores(_).
Heres the code i used:
CODE:
Also, it doesnt allows me to erase my text with backspace if i ever do a mistake.
I've received a text file in which the text is like this, ãYAHOO.COM. When I'm debugging in Visual Studio, the value I see for the character is "�"c. Firstly can anyone tell what is the character before yahoo. Is it a special character or some html character, and what is the character that I'm seeing in VS while debugging.So it goes like this, the ascii value of the character turns out to be 63.But when I write the value to a file it generates 3 characters whose ascii values are above 127.
View 3 RepliesI'm using the LIKE command as in:
If str Like
"*[^s
!-~]*"
Then
Unfortunately, this expression is true for the space character. I don't understand why. I'm trying to determine if str contains any special characters other than the ones indicated by s. If it does, I plan to process the string further.ebassador "Find it, fix it, move on.
I have a program that users log their activities during the day in a textbox. I have the following code to print the textbox, but it does not print the tab characters that are in the textbox.
Private Sub PrintDocument1_PrintPage(ByVal sender As Object, ByVal e As System.Drawing.Printing.PrintPageEventArgs) Handles PrintDocument1.PrintPage
Try
[code].....
I have a csv file and it has some special characters that blocking to insert data into a SQL server. How I can remove the characters before it dumps data into SQL.
View 3 RepliesI get some french characters in a string etc.Is there a simple way to replace them with English equivalent with a function or a regex or do i need to do the obvious(parse each character and when acute found replace with the english one)?
View 1 Repliesi try save/load a XML with special characters like this:
�o ��o �l�
when i save nothing goes wrong but when i try open using internet exploreror any software they result in a error in that characters.the header that i using is this:
<?xml version="1.0" encoding="UTF-8"?>
<dataroot xmlnsd="urn:schemas-microsoft-comfficedata" generated="2010-03-07T12:33:07">
what i need change for correct the problem?
I have a requirement of storing the following lines in a text file using VB.Net
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE scenario SYSTEM "anup.dtd">
I am unable to add the entire line enclosing it between " and ". I have used the
[code].....
how to validate a text box to accept only alphabets and numbers. no special characters. in vb.net i have tried the following code but it doesn't allow numbers but it allows alphabets only
Private Sub TextBox2_KeyPress(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyPressEventArgs) Handles TextBox2.KeyPress
If (Microsoft.VisualBasic.Asc(e.KeyChar) < 65) _
Or (Microsoft.VisualBasic.Asc(e.KeyChar) > 90) _
And (Microsoft.VisualBasic.Asc(e.KeyChar) < 97) _
[code]....
i have a textbox in my form i want to avoid special characters in keypress event
View 8 RepliesI have a text box where users will enter 4 digits that are ONLY numbers 0-9. I have blocked all letters and less than 4 or greater than 4 digits. But, for example if I enter 10.0, it will throw an exception, due to incorrect math used later in the prog. So how can I block the use of a (.) or any special character for that matter! I am using specific msgboxes to let the user know what isn't allowed, and would like to do the same for special characters.
What I have so far:
If Val(txtEntered.Text) < 0 Or
(IsNumeric(txtEntered.Text) = False) Then
MsgBox("Sorry, but letters are not allowed!")
[Code].....
To automate mailmerge function in word, i need to join different elements to complete the mailmergedatasource. In one of these file are words with special characters like ©, §,¨, .... When openng these files for reading, streamreader transfoms the characters to unreadable signs. When i give a type to use to open like ASCII, Unicode,it works for one or tho characters but not for all. I have the same problem when the character is read correctly, with streamwriter output to a textfile. Word cannot read the textfile and ask to define which type of coding should be used. In most of the cases not all the characters can be converted to readable characters.
View 8 RepliesI've got this implementation in javascript:
EscapeForRegex = function(input) {
var specials = ["[", "\", "^", "$", ".", "|", "?", "*", "+", "(", ")", "{", "}"]
for (var k in specials) {
[code].....