I have two labels in my form with two integer values I need to save these labels in an array and when I load the form again I need the saved data appear in two textboxes.
View 4 RepliesI've been looking into the SaveFileDialog and OpenFileDialog features, but have been failing to implement them. The actualy program that I would be implementing this in is much larger, so alternative methods are welcomed.
[Code]...
I have a project with lots of forms in there with the default font property of Microsoft Sans Serif, 8.25pt
How do I change the font for all forms to let's say Tahoma, 8.25pt without changing it manually per form?
I'm totally new to the programming area. I'm using VB 2008 and I'm trying to save three textboxes in a text format. I have tried some code but my problem is that I don't want to save always at the same name (test.txt). How can I do it.
Here is the code that I'm using (and probably has lot of mistakes :'( )
Public Class Form1
Const mForm1Name As String = "c:est.txt"
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim Form1 As System.IO.StreamWriter
[Code] .....
I understand that the problem is on the top where I've placed Const mForm1Name As String = "c:est.txt", but when I'm taking it out gives back a mistake. Also my form doesn't close when I save.
I need a program that will display the contents of an array in two labels. I'v been having problems. Does anybody know how to debug my code?
HTML
' displays the first and last names in label controls
Dim names() As String = {{"Mary", "Jones"}, _
{"Susan", "Washington"}, _
[Code].....
I have a label in my form which displays the text-content stored in a text file. However it is not able to display special characters like ", ', : etc. Instead it just puts a small rectangular box (same size as that of the text).
How do I get them to display these characters? Should I not use text files in this case or do I have to turn on some control-properties?
How are textboxes and labels different? (when text box is set property readonly to true and label set property borderstyle to 3d)theemathas likes: math, chess and computer programming?
View 2 RepliesI am tuning my knowlegde of Date and Times, but why doesn't this work
Dim now1=DateAndTime.Now
Dim month As Integer = now1.Month
'creates an array to determine the month name
[code]....
also, using the array, I noticed after 10 entries the array was looking to close, highlighting October, November and December as errors.
When calculating currencies in textboxes and labels, what's the best way to go about it?As it appears the $ sign and the , presents a problem when calculating.I thought it best to create a variable without those items when doing the calculation.
View 9 RepliesOkay, I've looked but I can't work out arrays for textboxes and labels. So, using 2 textboxes, how do I do the following in VB.Net?
[Code]...
I have a parcel post assignment, and i have three textboxes that represent height, width, and length. here are my questions1. how do i decalre them as integer? do i decalre the textboxes or the labels that represent them?2. how do i multiply all three together and multiply the total by 4pence and add 20p?
View 6 Replies[URL]...In this program, you need to insert two Textboxes, four labels and one button. Click the button and key in the code as shown below. Note how the various arithmetic operators are being used. When you run the program, it will perform the four basic arithmetic operations and display the results on the four labels.Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]...
How can I make use of Bullets in Labels and Textboxes? I want the user to enter text into a Textbox and after he/she is finished hit the Enter key, then a Label must display a Bullet followed by the text entered in the Textbox. Hendri Bissolati (Novice programmer)
View 3 RepliesI'm trying to write code that can print only filled text boxes in the form and then print the label near them. I searched and thought the code below is the end result I could reach.[code]...
View 1 RepliesI have run into another problem with my current project. I have a form that I need to print. Doing some searching online I found a few examples and implemented it into my code. It prints but prints all my text boxes and labels stacked on top of one another. How can I get this to print my textboxes and labels formatted as I have them in the form?
Here is my code:
Private Sub PrintToolStripMenuItem1_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles PrintToolStripMenuItem1.Click
PrintDocument1.PrinterSettings.Copies = 2
PrintDocument1.Print()
[Code] .....
I remember that in VB5 there was an "auto-redraw" property that needed to be turned on in order to make certain features refresh themselves. I'm having trouble with getting labels and text boxes to change in VB2005.A sample code snip would be
Label1.text = "Zero"
Sleep (1000)
Label1.text = "One"
[code]....
My textboxes and labels are fine in design view, but when I switch over to Debug or Build, a couple of the textboxes are pushed together and the labels aren't in their original spots.Haven't seen this before and was wondering if anyone has any suggestions as to why and how to fix?
View 12 RepliesHow can i make my app in a different language, so people can select another language,I need to translate some buttons, textboxes and labels.
View 2 RepliesI am trying to add an unicode character like this one to lets say listview item. I load character from file to string and from string i create a listview item with text same as string () all I get is charater like box.. interesting is that when I copy that character to program supporting unicode I get original char back ().. I tried everything. Searched a lot on internet and forums.. Question bothers me since yesterday, and my project can not continue without unicode support in basic form controls such as textbox.
View 4 RepliesThe three labels "Floor" "Typ." "HeadsI can insert once fine but multiple times only the third instance is written to the form.I have 2 textboxes to test that the Label.Name is changed but I can't make the Label.text stand for each label. I am certain this will occur too with the textboxes.I also need to keep track of these boxes for further use with the program.
Public Class Form1
Private Sub CheckBox1_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CheckBox1.CheckedChanged
[code]....
I tried to create a ghost text using Labels over the Textboxes. I am using VB.Net2005. I accomplished this with this code:
Public Class frmDataEntry
Private Sub PhantomTextLastName()
If txtLastName.Text = "" Then
[Code].....
Is there any way to reduce this code, so that when I try to add another Textboxes I'll never have to retype a bunch of codes. I have basic knowledge n using Module and Class
I created a form with 2 labels 2 textboxes and a button. Basically it is a login from. When I launch the form it shows the blinking cursor in the 1st textbox(this is ok) but when i try to type nothing happens. Once i click the form(not the textbox-textbox works too but wanted to note it was the form) it works. I have tried doing textbox1.focus(). I have tried doing the form.focus(). Neither were successful. It may have nothing to do with focus but it seems to be that to me.
View 12 RepliesI have a program with about 350 textboxes (about 50-60 of which are not visible to start) and with the click of a CheckBox I'm looking to make them visible.
View 4 RepliesI have wrote a program to help me arranging roster of 4 workers.The program is putting textboxes and labels on form1, textboxes and labels are interactive each other and calculate total working hours. how can I print out the "form1" ?
View 3 RepliesWhen clearing input from users. What is the difference between clearing it in these two forms
txtExample.Clear()
versus
txtExample.Text = String.Empty
The only difference that I could find was that the labels aren't cleared with .Clear() (or at least from what I inferred from my book that's not possible). Is there a noticeable speed difference or should I just clear both labels and txt boxes with String.Empty
Hi,
I have a program that has over 100 labels and over 40 textboxes. I was using the code below to save the text. However, when I open it, some of the text is in the wrong spot (for a label or textbox) and some of the text that shouldn't have been saved is. Is there a way that I can get all these labels' and textboxes' data saved? I would like to stick to the code somewhat if thats possible. I may be looking in the wrong direction too as I am very new. Thank you.
Private Sub SaveAsToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SaveAsToolStripMenuItem.Click
Dim myStream As Stream
Dim saveFileDialog1 As New SaveFileDialog()
saveFileDialog1.Filter =
"txt files (*.txt)|*.txt|All files (*.*)|*.*"
saveFileDialog1.FilterIndex = 2
saveFileDialog1.RestoreDirectory =
True
If saveFileDialog1.ShowDialog() = DialogResult.OK Then
myStream = saveFileDialog1.OpenFile()
If (myStream IsNot Nothing) Then
Dim myStreamWriter As StreamWriter = New StreamWriter(myStream)
myStreamWriter.WriteLine(txtName1.Text.ToString)
myStreamWriter.WriteLine(txtName2.Text.ToString)
myStreamWriter.Flush()
myStream.Close()
End If
End If
Private
Sub OpenProjectToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OpenProjectToolStripMenuItem.Click
Dim myStream As Stream = Nothing
Dim openFileDialog1 As New OpenFileDialog()
openFileDialog1.Filter =
"txt files (*.txt)|*.txt|All files (*.*)|*.*"
openFileDialog1.FilterIndex = 2
openFileDialog1.RestoreDirectory =
True
If openFileDialog1.ShowDialog() = System.Windows.Forms.DialogResult.OK Then
Try
myStream = openFileDialog1.OpenFile()
If (myStream IsNot Nothing) Then
Dim myStreamReader As StreamReader = New StreamReader(myStream)
txtName1.Text = myStreamReader.ReadLine()
txtName2.Text = myStreamReader.ReadLine
myStream.Close()
End If
Catch Ex As Exception
MessageBox.Show(
"Cannot read file from disk. Original error: " & Ex.Message)
Finally
If (myStream IsNot Nothing) Then
myStream.Close()
End If
End Try
End If
I have a program that has over 100 labels and over 40 textboxes. I was using the code below to save the text. However, when I open it, some of the text is in the wrong spot (for a label or textbox) and some of the text that shouldn't have been saved is. Is there a way that I can get all these labels' and textboxes' data saved? I would like to stick to the code somewhat if thats possible.
View 25 RepliesVB2008 I have a panel in which I draw some graphics. Parts of the codes which I have successfully wrote & drawn are shown below:
Dim scaleX1 As Single = CSng(Me.pic_pcg.Width / 1.355)
Dim scaleY1 As Single = Me.pic_pcg.Height / HGT
'
e.Graphics.ScaleTransform(scaleX1, scaleY1)
[code]....
I want to add some labels and textboxes in the panel so as to add remarks & captions to certain parts of the graphics.How do I set or modify the "scales ?" of the locations of these labels & textboxes so that they will be placed correctly, corresponding to the above scaletransform/translatetransform/rotatetransform.
I am making an sql search engine. I need it to find a row of data take some of the columns and paste it to some labels or textboxes.Need some help with the code got my connection, command, I am thinking on how to split the notes and the username onto two different controls or should I get two different sql statements for them ?
Private Sub btnFind_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnFind.Click
Dim con As New SqlConnection
Dim cmd As SqlCommand = New SqlCommand("select owner, notes from orders where orderref = '" + txtReference.Text + "'", con)
[code]....
So I have my main form (Form1) and I have a module called globalMod. On start up, Form1 loads, and globalMod contains functions and global variables (using Friend). I need to be able to have a function inside of globalMod edit a label/text box/etc in Form1. I tired Form1.object.Text = "content" and it doesn't do anything, even if I update / refresh the form.
View 1 Replies