I'm trying to write code that can print only filled text boxes in the form and then print the label near them. I searched and thought the code below is the end result I could reach.[code]...
View 1 RepliesIf it is at all possible, I would like to print a page that is layed out with labels filled with text from previousley stored information from the program. now, obviousley, because the text can change in amount, and so the labels need to be able to change in size, and if at all possible allow multiple lines, though if there is no way to do it, then an unchagable text box would serfice.
There is a problem though, the fact that the labels will be changing size means that the position of the labels needs to be variable to the previouse. Example: the box above needs to be bigger, so the box bellow needs to drop down equall to the amount that the above grows.
I have run into another problem with my current project. I have a form that I need to print. Doing some searching online I found a few examples and implemented it into my code. It prints but prints all my text boxes and labels stacked on top of one another. How can I get this to print my textboxes and labels formatted as I have them in the form?
Here is my code:
Private Sub PrintToolStripMenuItem1_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles PrintToolStripMenuItem1.Click
PrintDocument1.PrinterSettings.Copies = 2
PrintDocument1.Print()
[Code] .....
I have wrote a program to help me arranging roster of 4 workers.The program is putting textboxes and labels on form1, textboxes and labels are interactive each other and calculate total working hours. how can I print out the "form1" ?
View 3 RepliesI've been looking all over for code to check that all the textboxes on the form have been filled in.... I've found this code in slight variations which people said worked fine
Dim ctl As Control
For Each ctl In Me.Controls
If TypeOf ctl is TextBox Then
If ctl.Text = "" Then
[code]....
I've attached this code to the click of a button and even with all fields empty nothing will happen!
I have 4 textboxes - txtResFDB, txtResPBV, txtResRSLP and txtResTCD..
i need to check that any of the two textboxes should be filled up out of 4.
I have 2 textboxes where the values are filled with this code(the data is collected from 2 different
[Code]...
When I now tries to update the data in the box743 i get an error. Who says that I can not convert the strng to double.I use the tableadapter to update the database and both box498 and box518 updates without problems.But when I try to upgrade the 743 box I get the error.
I have a program in which I am trying to do the mail merge with the word template that I already have.
I have already setup the datasource for the word template in the word itself and it is pointing to my Employee Table which has all the information for the employee. I have also inserted the merge fields in the document where ever I need them. Now I want to print the document (Letter) with all the merge fields filled in from my application but for only employee whose Name or Number I sent from my program not all the employees I have in the datasource.
Now if I have to do it in Word, we have an option called Find Recipient in Mailings -> Preview Results in which I can set the Name or Number of the employee to get all his information to do the merge but how can I do the same thing from my program.
I can send all the fields values from my code like in the code below but I want to use my datasource to provide values. I have employee's Number I want to provide to the template to find the employee - so all the values are filled based on the employee's Number.
i want to print
1. Only text
2. No controls should be appear in the print like textboxes etc.
How are textboxes and labels different? (when text box is set property readonly to true and label set property borderstyle to 3d)theemathas likes: math, chess and computer programming?
View 2 RepliesWhen calculating currencies in textboxes and labels, what's the best way to go about it?As it appears the $ sign and the , presents a problem when calculating.I thought it best to create a variable without those items when doing the calculation.
View 9 RepliesOkay, I've looked but I can't work out arrays for textboxes and labels. So, using 2 textboxes, how do I do the following in VB.Net?
[Code]...
I have a parcel post assignment, and i have three textboxes that represent height, width, and length. here are my questions1. how do i decalre them as integer? do i decalre the textboxes or the labels that represent them?2. how do i multiply all three together and multiply the total by 4pence and add 20p?
View 6 Replies[URL]...In this program, you need to insert two Textboxes, four labels and one button. Click the button and key in the code as shown below. Note how the various arithmetic operators are being used. When you run the program, it will perform the four basic arithmetic operations and display the results on the four labels.Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]...
How can I make use of Bullets in Labels and Textboxes? I want the user to enter text into a Textbox and after he/she is finished hit the Enter key, then a Label must display a Bullet followed by the text entered in the Textbox. Hendri Bissolati (Novice programmer)
View 3 RepliesI remember that in VB5 there was an "auto-redraw" property that needed to be turned on in order to make certain features refresh themselves. I'm having trouble with getting labels and text boxes to change in VB2005.A sample code snip would be
Label1.text = "Zero"
Sleep (1000)
Label1.text = "One"
[code]....
I've been looking into the SaveFileDialog and OpenFileDialog features, but have been failing to implement them. The actualy program that I would be implementing this in is much larger, so alternative methods are welcomed.
[Code]...
My textboxes and labels are fine in design view, but when I switch over to Debug or Build, a couple of the textboxes are pushed together and the labels aren't in their original spots.Haven't seen this before and was wondering if anyone has any suggestions as to why and how to fix?
View 12 RepliesHow can i make my app in a different language, so people can select another language,I need to translate some buttons, textboxes and labels.
View 2 RepliesI am trying to add an unicode character like this one to lets say listview item. I load character from file to string and from string i create a listview item with text same as string () all I get is charater like box.. interesting is that when I copy that character to program supporting unicode I get original char back ().. I tried everything. Searched a lot on internet and forums.. Question bothers me since yesterday, and my project can not continue without unicode support in basic form controls such as textbox.
View 4 RepliesThe three labels "Floor" "Typ." "HeadsI can insert once fine but multiple times only the third instance is written to the form.I have 2 textboxes to test that the Label.Name is changed but I can't make the Label.text stand for each label. I am certain this will occur too with the textboxes.I also need to keep track of these boxes for further use with the program.
Public Class Form1
Private Sub CheckBox1_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CheckBox1.CheckedChanged
[code]....
I tried to create a ghost text using Labels over the Textboxes. I am using VB.Net2005. I accomplished this with this code:
Public Class frmDataEntry
Private Sub PhantomTextLastName()
If txtLastName.Text = "" Then
[Code].....
Is there any way to reduce this code, so that when I try to add another Textboxes I'll never have to retype a bunch of codes. I have basic knowledge n using Module and Class
I created a form with 2 labels 2 textboxes and a button. Basically it is a login from. When I launch the form it shows the blinking cursor in the 1st textbox(this is ok) but when i try to type nothing happens. Once i click the form(not the textbox-textbox works too but wanted to note it was the form) it works. I have tried doing textbox1.focus(). I have tried doing the form.focus(). Neither were successful. It may have nothing to do with focus but it seems to be that to me.
View 12 RepliesI have a program with about 350 textboxes (about 50-60 of which are not visible to start) and with the click of a CheckBox I'm looking to make them visible.
View 4 RepliesWhen clearing input from users. What is the difference between clearing it in these two forms
txtExample.Clear()
versus
txtExample.Text = String.Empty
The only difference that I could find was that the labels aren't cleared with .Clear() (or at least from what I inferred from my book that's not possible). Is there a noticeable speed difference or should I just clear both labels and txt boxes with String.Empty
I have two labels in my form with two integer values I need to save these labels in an array and when I load the form again I need the saved data appear in two textboxes.
View 4 RepliesHi,
I have a program that has over 100 labels and over 40 textboxes. I was using the code below to save the text. However, when I open it, some of the text is in the wrong spot (for a label or textbox) and some of the text that shouldn't have been saved is. Is there a way that I can get all these labels' and textboxes' data saved? I would like to stick to the code somewhat if thats possible. I may be looking in the wrong direction too as I am very new. Thank you.
Private Sub SaveAsToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles SaveAsToolStripMenuItem.Click
Dim myStream As Stream
Dim saveFileDialog1 As New SaveFileDialog()
saveFileDialog1.Filter =
"txt files (*.txt)|*.txt|All files (*.*)|*.*"
saveFileDialog1.FilterIndex = 2
saveFileDialog1.RestoreDirectory =
True
If saveFileDialog1.ShowDialog() = DialogResult.OK Then
myStream = saveFileDialog1.OpenFile()
If (myStream IsNot Nothing) Then
Dim myStreamWriter As StreamWriter = New StreamWriter(myStream)
myStreamWriter.WriteLine(txtName1.Text.ToString)
myStreamWriter.WriteLine(txtName2.Text.ToString)
myStreamWriter.Flush()
myStream.Close()
End If
End If
Private
Sub OpenProjectToolStripMenuItem_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles OpenProjectToolStripMenuItem.Click
Dim myStream As Stream = Nothing
Dim openFileDialog1 As New OpenFileDialog()
openFileDialog1.Filter =
"txt files (*.txt)|*.txt|All files (*.*)|*.*"
openFileDialog1.FilterIndex = 2
openFileDialog1.RestoreDirectory =
True
If openFileDialog1.ShowDialog() = System.Windows.Forms.DialogResult.OK Then
Try
myStream = openFileDialog1.OpenFile()
If (myStream IsNot Nothing) Then
Dim myStreamReader As StreamReader = New StreamReader(myStream)
txtName1.Text = myStreamReader.ReadLine()
txtName2.Text = myStreamReader.ReadLine
myStream.Close()
End If
Catch Ex As Exception
MessageBox.Show(
"Cannot read file from disk. Original error: " & Ex.Message)
Finally
If (myStream IsNot Nothing) Then
myStream.Close()
End If
End Try
End If
I have a program that has over 100 labels and over 40 textboxes. I was using the code below to save the text. However, when I open it, some of the text is in the wrong spot (for a label or textbox) and some of the text that shouldn't have been saved is. Is there a way that I can get all these labels' and textboxes' data saved? I would like to stick to the code somewhat if thats possible.
View 25 RepliesVB2008 I have a panel in which I draw some graphics. Parts of the codes which I have successfully wrote & drawn are shown below:
Dim scaleX1 As Single = CSng(Me.pic_pcg.Width / 1.355)
Dim scaleY1 As Single = Me.pic_pcg.Height / HGT
'
e.Graphics.ScaleTransform(scaleX1, scaleY1)
[code]....
I want to add some labels and textboxes in the panel so as to add remarks & captions to certain parts of the graphics.How do I set or modify the "scales ?" of the locations of these labels & textboxes so that they will be placed correctly, corresponding to the above scaletransform/translatetransform/rotatetransform.
I have a list of names in Excel and wish to print name badges from this list.There is a second line of information to be printed under the name. The only label producing software I have is MS Word.I am programming in VB in Office 2007.
View 2 Replies