I've been looking all over for code to check that all the textboxes on the form have been filled in.... I've found this code in slight variations which people said worked fine
Dim ctl As Control
For Each ctl In Me.Controls
If TypeOf ctl is TextBox Then
If ctl.Text = "" Then
[code]....
I've attached this code to the click of a button and even with all fields empty nothing will happen!
I have 4 textboxes - txtResFDB, txtResPBV, txtResRSLP and txtResTCD..
i need to check that any of the two textboxes should be filled up out of 4.
I have 2 textboxes where the values are filled with this code(the data is collected from 2 different
[Code]...
When I now tries to update the data in the box743 i get an error. Who says that I can not convert the strng to double.I use the tableadapter to update the database and both box498 and box518 updates without problems.But when I try to upgrade the 743 box I get the error.
I'm trying to write code that can print only filled text boxes in the form and then print the label near them. I searched and thought the code below is the end result I could reach.[code]...
View 1 Repliesspell check class? How to use it to spell check textboxes in real time?
View 9 Replieshow to check if numerous textbox's have a value, and then if they all have a value that is greater than zero, and then if they do, execute a command?
View 1 Repliesi would like to make an IF statement that will check whether all textboxes in the form have been changed. i dont want to check one by one. can i check all textboxes with one simple IF THEN clause in vb.net?
View 5 Repliesif i have 12 textboxes and i want to make sure none of them contain matching text (and no i don't trust the user to do this :P ) how would i go about this?
View 3 RepliesI have a code in Save Button, and part of it, a code that checks if the dynamic text boxes that has been created is empty. But when the system runs, it only check the first set of text box and an an message appears "Collection was Modified; enumareation operation may not execute.".
Here's the code:
Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
Try
For Each txt As TextBox In TextBoxes2
If String.IsNullOrEmpty(txt.Text) Then
[Code]...
I have my menustrip with the standard edit items. I know I can do this:
If TextBox1.Focused = True Then
TextBox1.Undo()
ElseIf TextBox2.Focused = True Then
TextBox2.Undo()
'Ect. Ect. Ect.
End If until I type out every textbox. However, I have like 30 textboxes and don't want to type out every textbox to see if they have focus. Is there a work around for that?
[Code]...
I have numerous textboxes which I use to gather data to be placed into an array. But I want to ensure, before I place them to the array,that there is at least one character (letter or number, no space) in each textbox. Seeing as I have about two dozen, it would seem tedious to write an If...Then statement for each of them. And I cannot use a custom textbox class for this. So how can this be done?
View 3 RepliesI have a couple of textboxes on my form. I'd like to give the user the opportunity to spell-check these textboxes so that they can correct their mistakes and then update the contents of the textbox into the database.
Only thing is, I'm not sure where to begin. I found this thread by Martin Liss, but it errors out for me as it's not .NET.
[URL]
I need to write client / server application... I need that client write it`s data in textboxes or comboboxes or check any checkboxes and etc. but I need that this info saved not in it`s own computer,on server...
View 5 RepliesI have a code which runs a check. User inputs values into textboxes in inputform, then runs the check, and the msgbox is displayed. if msg is yes then program continues, else I want it to return to the input for to change values in textboxes. How can I do that?
Below is the code.
If (optanodespacing > 300) Then
optanodespacing = 300
Dim answerspc As Integer = MsgBox("Anode Spacing Must NOT Exceed 300m,
[CODE]...
On my form, i've got some textboxes and some richtextboxes. I'm using the following code, to search through the text properties of each of the two types of control. see below:-
For Each ctl As Control In Me.Controls
If ctl.Text = "7777" Then
ctl.Text = "found the sevens"
End If
Next
What i'd like to do is isolate the textboxes only, is there a way to do that? I tried this but i got an error:-
For Each box As TextBox In Me.Controls
If box.Text = "7777" Then
box.Text = "Found"
End If
Next
My goal is to, Pull information from a websight's textboxes in IE into my program textboxes. and to later Put changes from into other values on the websight from my program into it. The sight has multiple textboxes, on different frames. within it.I need to keep it as a exsiting open browser instead of making a new one. only gotten as far as finding the open internet explorer window, by useing
[Code]...
We are filling a combobox with information of a table. (we read a field for filling the combobox and the id)
It's necessary that if we choose an item in the combobox we also get the id of the table.How do we put the id into the combobox so can read this id after selecting an item.
If Page.IsPostBack = False Then[code]...
View 3 RepliesI cannot seem to figure out how to search through a created/filled dataset for a certain value which exists in column(1), returning Column(0)'s value into a textbox.My code looks like this:
[Code]...
The program consists of making 2 text boxes, one labeled Age, and one labeled Name.The Name text box must return the name in all uppercase.If the Age text box isn't filled with a numerical value, you should receive a message saying "need a number" and return your cursor to the age box.2 command buttons "Process" and "Exit"
I tried getting started, but I usually always work better when i have a beginning!
I have a Form with 4 Textboxes. The Textboxes are multiline. To write the contents of the 4 textboxes, I did the following.
[Code]...
How do I read to or populate the Textboxes using StreamReader or StringReader or other means?
This is the situation when there is a shift change and one record is started by one person and finished by another. What one has written another can't change but must finished a record. So u must lock only the combo boxes and text boxes that are filled. This code lockes all the combo boxes and text boxes and 2 check boxes (NEZAVRSENE_INTERVENCIJE and IZMENA_RASKRSNICE) by clicking on a NEZAVRSENE_INTERVENCIJE check box. Lets say I have combo boxes 1 2 and 3 and text boxes 1 2 and 3 and I have to lock only the ones that are filled. How do I code that another check box lockes just the filled controls?
[Code]...
I have a form and it is databound to a Access table with the standard TABLEADAPTER wizard. All works well HOWEVER, new records are not displayed in sorted order.When I add a new RECORD, it can go anywhere within the table. When I move around the table using the TABLEADAPTER Manager, the newly added record does not appear in sorted order.Furthermore, when I restart the application and show the form (which issued a FILL command), the records are not sorted.The SELECT I am using is fairly simple:
SELECT [list of fields] FROM TableXYZ ORDER By [sort field]
This HOWEVER, does not appear to work.get the table to be sorted when filled?Other information - the table in question has the field that is specified in the ORDER BY clause which is the same as the Primary Key.As an example, in the table there are records with the following KEY:
4313, 4314, 4315
When I insert a new record, it might fall between 4313 and 4314. Lets assume I add 9999. I expect it to be at the end of the list however, it appears between 4313 and 4314.FYI Also tried this in the code as well:
TableBindingSouce.Sort = "field1 ASC"
I have 3 textboxes. I want Button3 to remain disabled until ALL three are filled out. This seems to work, but for only ONE textbox:
If Textbox1.Text.Trim <> String.Empty then
Button1.Enabled = True
Else
Button1.Enabled = False
End If
I have a checkboxlist that is filled with items from an array. I want the user to be able to select the items they want to remove then press a button and have the items be removed from the array. I have never worked with a checkboxlist before so I'm not really sure how to go about this. Here is what I have tried so far:
[Code]...
When I re-display the array into the checkboxlist it shows that nothing was removed from the array.
I have a CheckListBoxthat is filled with items from an array. I want the user to be able to select the items they want to remove then press a button and have the items be removed from the array. I have never worked with a CheckListBoxthat before so I'm not really sure how to go about this. Here is what I have tried so far:
Private Sub btnRemove_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRemove.Click
Dim TempNameList As New ArrayList
If cmbRemove.SelectedIndex = 0 Then
TempNameList.AddRange(NameList)
Array.Clear(NameList, 0, NameList.Length)
When I re-display the array into the CheckListBoxthat it shows that nothing was removed from the array.
How can I control what is filled into the table adapter at runtime? Basically, I have a table full of thousands of rows, and I want to limit this to just 1 row. I want to specify an ID number and be able to pull up that row in the table, and I need to do this at run time. What are my options, and what is the easiest way? I want to make sure the data is still linked to the original row in my database, that way the changes are saved properly.
View 5 RepliesThe strings did not filled the items on my datagridview using with system.data.table. When I click the button, nothing are going to fill on my datagridview table.[code]...
View 1 RepliesI'm fairly new to visual basic and have a problem that is probably quite easy to solve yet I have been unable to do it so far and am about at wits end.I have an access database with a table that contains a list of cities and states. what i would like to do is to populate a combo box on a vb form with a list of the states in the states column. the query that i have is as follows:
SELECT DISTINCT State from Cities I have previewed the data in the dataset designer and it works, i just can't figure out how to make it fill the combo box. i initially created a table with just all of the states and then used a binding source and table adapter to bind it to the combo box, but if I'm able to figure this out this would help with my application going forward
I used this code:
Code:
Friend Sub PopulateCB(ByRef mycontrol As ComboBox, _
ByVal expressionSQL As String)
' DMBD is my data-handling class:
[code]...
Nevertheless, mycontrol remains empty after this.