I have 3 textboxes. I want Button3 to remain disabled until ALL three are filled out. This seems to work, but for only ONE textbox:
If Textbox1.Text.Trim <> String.Empty then
Button1.Enabled = True
Else
Button1.Enabled = False
End If
I want to make a loop that only loops if the serial link is open and Button3 (which writes a stop signal to the program) is not pressed. I've gotten as far as this: Do While Serial.IsOpen = True & Button3. but do not know how to tell the while loop to stop when Button3 is pressed.
View 2 RepliesI am drawing lines on a picturebox - not in the paint event. I realise that if I resize the PictureBox the lines won't be redrawn - but the PictureBox is fixed. If I display a MessageBox at the end of my draws the lines do not remain on the screen. This was OK with VB 6.0. Hoe can I stop them being erased?
View 2 RepliesI have dropdownlist and set autopostback Property to true.. the problem is that i when i change index of dropdown list Page gets postback. After Completion of Page load index of dropdown goes to 0 automatically.
How can i remain index of dropdownlist after Postback
im using my logic in the page load fn. i have an variable id. while loading page the variable id want to increment by 1 and value remain same... initially the id have 0 while calling the page load 4 times this value have to be 4.
View 6 RepliesFor some reason, every time I hit the red "X" button to close the program. The program closes, but the process is still there. How do I make it so that if I press it, itll end the process too?
View 6 RepliesIm opening an excel document with vb.net and i dont want vb.net to close it but to release excel so that when the user closes excel it does not remain as a running process... which it currently is doing here is the code i was using
[Code]....
Recently I was working on a project in VB.NET, and I was encountering a mysterious problem with some of the DB connections. This was a project that I inherited from someone else and they had used something like this:
Dim reader As SqlDataReader = myCommand.ExecuteReader(CommandBehavior.CloseConnection And CommandBehavior.SingleRow)
//after reading data
reader.Close()
It appears as though this was causing the connection to not close properly all the time. I've removed the CommandBehavior.SingleRow, and it seems to be working ok now, but I was wondering if anyone else has encountered this? Does anyone know why that would not work? I've seen CommandBehaviors combined in this way before, but it has never caused that problem before.
I have a datagridview for user's input. For example, the columns are "Name", "Date of Birth"... For the "Date of Birth" part, i have implemented validaion... i want to make it that user have to enter a valid "Date of birth" before they are allowed to leave the Cell. Meaning once them entered the Cell, they have to provide a valid "Date of birth" then they can move on.
[Code]...
I am using a GridView with its first column as a template field with radio buttons.
I need to make the first radio button in the first row of the grid remain default selected during page load / postback.
I have 2 drop down lists and 1 submit button. It works such that after the user has selected values from BOTH the drop down lists, then the user will click a "Search" button. My problem is, after the user click the "Search" button, the second drop down list is no longer displayed with the selected value, instead it displayed a default value. May I know how can I make sure the selected value remain selected even after the user clicks the "Search" button on the page?
For your info, my coding goes as
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim strSelectedUsername As String
[Code]....
I have mdi application, on main form which is mdi container and has a tree view. i open the child form on afterselect even of treeview. the issue i'm facing that i open the form but focus remain on tree view until i click on the the form. my question is how i can give focus to form rather it stays on treeview. i tried frm.focus also activatemdichild(frm) no sucess.
View 21 RepliesI have a VB. Net App where I want the user to open a modeless form which contains reference information about items in a select box. If the user double clicks the item selected in the list box a modal form is opened to edit the item.I want the previously opened reference form to remain active/enabled, that is, I want the user to be able to click on it, move it, etc.I was able to get the form to at least show up on the task bar by setting it's "ShowInTaskBar" property to true, however, when it comes to the front the user can still not move it to the side to view all of the Edit Forms information.
View 7 RepliesNext listbox value:
1
2
3
4
5
6
7
8
9
10
11
I want to remove the first 9 lines remain in listbox:
10
11
I have an id called "AM01". I separated them by truncating the numbers out and increase it by 1 each time I want to add a new record. Therefore before I add the record, I would have to combine them back. I managed to truncate them and combine them back. However, the results turn out to be "AM2" instead of "AM02". So, is there a way where I could make the numbers as "02" instead of just "2"?
View 6 RepliesI've been looking all over for code to check that all the textboxes on the form have been filled in.... I've found this code in slight variations which people said worked fine
Dim ctl As Control
For Each ctl In Me.Controls
If TypeOf ctl is TextBox Then
If ctl.Text = "" Then
[code]....
I've attached this code to the click of a button and even with all fields empty nothing will happen!
I have 4 textboxes - txtResFDB, txtResPBV, txtResRSLP and txtResTCD..
i need to check that any of the two textboxes should be filled up out of 4.
We are filling a combobox with information of a table. (we read a field for filling the combobox and the id)
It's necessary that if we choose an item in the combobox we also get the id of the table.How do we put the id into the combobox so can read this id after selecting an item.
If Page.IsPostBack = False Then[code]...
View 3 RepliesI cannot seem to figure out how to search through a created/filled dataset for a certain value which exists in column(1), returning Column(0)'s value into a textbox.My code looks like this:
[Code]...
The program consists of making 2 text boxes, one labeled Age, and one labeled Name.The Name text box must return the name in all uppercase.If the Age text box isn't filled with a numerical value, you should receive a message saying "need a number" and return your cursor to the age box.2 command buttons "Process" and "Exit"
I tried getting started, but I usually always work better when i have a beginning!
I have 2 textboxes where the values are filled with this code(the data is collected from 2 different
[Code]...
When I now tries to update the data in the box743 i get an error. Who says that I can not convert the strng to double.I use the tableadapter to update the database and both box498 and box518 updates without problems.But when I try to upgrade the 743 box I get the error.
How to count the total no. of asp.net checkboxes, checkboxes checked, no. of checkboxes remain unchecked in webform using vb.net ?I m using Visual studio 2008 with vb as a language ..I my webform i have 10 checkboxes...i wanna count total no. of checkboxes in webform in textboxes1 total no. of checkboxes checked in webform in textbox2 total no. of checkboxes remain unchecked in webform in textbox3?
View 2 RepliesThis is the situation when there is a shift change and one record is started by one person and finished by another. What one has written another can't change but must finished a record. So u must lock only the combo boxes and text boxes that are filled. This code lockes all the combo boxes and text boxes and 2 check boxes (NEZAVRSENE_INTERVENCIJE and IZMENA_RASKRSNICE) by clicking on a NEZAVRSENE_INTERVENCIJE check box. Lets say I have combo boxes 1 2 and 3 and text boxes 1 2 and 3 and I have to lock only the ones that are filled. How do I code that another check box lockes just the filled controls?
[Code]...
I have a form and it is databound to a Access table with the standard TABLEADAPTER wizard. All works well HOWEVER, new records are not displayed in sorted order.When I add a new RECORD, it can go anywhere within the table. When I move around the table using the TABLEADAPTER Manager, the newly added record does not appear in sorted order.Furthermore, when I restart the application and show the form (which issued a FILL command), the records are not sorted.The SELECT I am using is fairly simple:
SELECT [list of fields] FROM TableXYZ ORDER By [sort field]
This HOWEVER, does not appear to work.get the table to be sorted when filled?Other information - the table in question has the field that is specified in the ORDER BY clause which is the same as the Primary Key.As an example, in the table there are records with the following KEY:
4313, 4314, 4315
When I insert a new record, it might fall between 4313 and 4314. Lets assume I add 9999. I expect it to be at the end of the list however, it appears between 4313 and 4314.FYI Also tried this in the code as well:
TableBindingSouce.Sort = "field1 ASC"
I have a checkboxlist that is filled with items from an array. I want the user to be able to select the items they want to remove then press a button and have the items be removed from the array. I have never worked with a checkboxlist before so I'm not really sure how to go about this. Here is what I have tried so far:
[Code]...
When I re-display the array into the checkboxlist it shows that nothing was removed from the array.
I have a CheckListBoxthat is filled with items from an array. I want the user to be able to select the items they want to remove then press a button and have the items be removed from the array. I have never worked with a CheckListBoxthat before so I'm not really sure how to go about this. Here is what I have tried so far:
Private Sub btnRemove_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRemove.Click
Dim TempNameList As New ArrayList
If cmbRemove.SelectedIndex = 0 Then
TempNameList.AddRange(NameList)
Array.Clear(NameList, 0, NameList.Length)
When I re-display the array into the CheckListBoxthat it shows that nothing was removed from the array.
How can I control what is filled into the table adapter at runtime? Basically, I have a table full of thousands of rows, and I want to limit this to just 1 row. I want to specify an ID number and be able to pull up that row in the table, and I need to do this at run time. What are my options, and what is the easiest way? I want to make sure the data is still linked to the original row in my database, that way the changes are saved properly.
View 5 RepliesThe strings did not filled the items on my datagridview using with system.data.table. When I click the button, nothing are going to fill on my datagridview table.[code]...
View 1 RepliesI'm fairly new to visual basic and have a problem that is probably quite easy to solve yet I have been unable to do it so far and am about at wits end.I have an access database with a table that contains a list of cities and states. what i would like to do is to populate a combo box on a vb form with a list of the states in the states column. the query that i have is as follows:
SELECT DISTINCT State from Cities I have previewed the data in the dataset designer and it works, i just can't figure out how to make it fill the combo box. i initially created a table with just all of the states and then used a binding source and table adapter to bind it to the combo box, but if I'm able to figure this out this would help with my application going forward