Created A Form With 2 Labels 2 Textboxes And A Button?
Feb 10, 2009
I created a form with 2 labels 2 textboxes and a button. Basically it is a login from. When I launch the form it shows the blinking cursor in the 1st textbox(this is ok) but when i try to type nothing happens. Once i click the form(not the textbox-textbox works too but wanted to note it was the form) it works. I have tried doing textbox1.focus(). I have tried doing the form.focus(). Neither were successful. It may have nothing to do with focus but it seems to be that to me.
View 12 Replies
ADVERTISEMENT
Jun 14, 2011
[URL]...In this program, you need to insert two Textboxes, four labels and one button. Click the button and key in the code as shown below. Note how the various arithmetic operators are being used. When you run the program, it will perform the four basic arithmetic operations and display the results on the four labels.Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]...
View 4 Replies
May 15, 2009
I have made a program wherein you the labels are dynamically created with a press of a button. if you press on the label, the label would then change color from white to blue. my problem is that how will you make the backcolor of the label change when the button3 is pressed.
here are the codes. placed the whole thing since I dunno if you guys would understand what I mean.
[code]...
PS here is the link to what my program looks like. link to my program . the button3 in the image is Reserve Seat.
View 4 Replies
Dec 1, 2010
So I have my main form (Form1) and I have a module called globalMod. On start up, Form1 loads, and globalMod contains functions and global variables (using Friend). I need to be able to have a function inside of globalMod edit a label/text box/etc in Form1. I tired Form1.object.Text = "content" and it doesn't do anything, even if I update / refresh the form.
View 1 Replies
Jun 22, 2010
how to move button over a panel from the form in which the button is created dynamically at run-time ?
View 1 Replies
Jul 13, 2011
I have started learning a bit about programming. "Create a new project, and add two text boxes and a button to the form. Write code that, when a button is clicked, places the text in the first text box into the second text box. Hint: Use the Text property of the TextBox controls." Now I am trying to look at it logically do I put the same text in both textbox properties and write code that says if it is visible in one it cant be in the other or declare the text in the code, either way I am a bit stumped, but feel if a stick with it it will click and i will be writing my own code in no time.
View 8 Replies
May 28, 2012
I've created a form with two check boxs and one button. I added this code Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim Bg1.txt As String = "C:UsersJoshDocumentsBg1.txt"
Dim objReader As New System.IO.StreamReader(Bg1.txt)
TextBox1.Text = objReader.ReadToEnd
objReader.Close()
End Sub
End Class
to the button thinking it would open Bg1.txt when clicked but it's not working?
View 2 Replies
Jan 25, 2009
I want to have multipul fourms on my webbrowser and i've never done it before so I created a new windows form and put a button on my taskbar that would show the form this is my script Show(Form2) but when I click the button my whole project closes. it also did this with an about box.
View 3 Replies
Sep 11, 2009
I have code that refers to controls like buttons and labels and textboxes (obviously), but i want to create them programatically, how can i create a button or label that is on a form that has also been created programatically. Here is what i have:
Dim frmIndashone As Windows.Forms.Form
Dim vscPage As Windows.Forms.ScrollBar
Dim lblPageNum As Windows.Forms.Label
Dim txtVector As Windows.Forms.TextBox
Dim txtPageCode As Windows.Forms.TextBox
I am asking because i have a With statement that assigns different values to the different things that looks like this below:
RaiseEvent Load(frmIndashone)
With frmIndashone
.vscPage.min = 1
[code]....
But i am told on everyline of the second snippet that vdcPage, lblPageNum, txtVector and txtPageCode are not members of windows.Forms.Form, How can i make them members?
View 6 Replies
May 27, 2011
How are textboxes and labels different? (when text box is set property readonly to true and label set property borderstyle to 3d)theemathas likes: math, chess and computer programming?
View 2 Replies
Mar 5, 2011
user control, I'm dynamically creating an arrary of several labels within a groupbox on the controls form. This is done in the load event.The user control is then placed on the form of mainapplication and then run. My problem being that the labels are invisiblen I launch the app. The visible property for the labels is set to true during the creation of the controls.
View 3 Replies
Mar 21, 2010
I'm trying to have a for each loop in which 5 labels should be created.Each time the loop restarts the 5 labels should appear in a tabpage.The problem is, it only makes a label once, then it keeps on mving the label to a different tab instead of creating a new one for each tab.
It loops 5 times, thus filling 5 labels.Then the next 5 labels should get filled in a new tab.But it just moves the original labels. How do I force it to create a new label each time?
[Code]...
View 1 Replies
Apr 17, 2010
When calculating currencies in textboxes and labels, what's the best way to go about it?As it appears the $ sign and the , presents a problem when calculating.I thought it best to create a variable without those items when doing the calculation.
View 9 Replies
Nov 12, 2010
Okay, I've looked but I can't work out arrays for textboxes and labels. So, using 2 textboxes, how do I do the following in VB.Net?
[Code]...
View 6 Replies
Oct 5, 2009
I have a parcel post assignment, and i have three textboxes that represent height, width, and length. here are my questions1. how do i decalre them as integer? do i decalre the textboxes or the labels that represent them?2. how do i multiply all three together and multiply the total by 4pence and add 20p?
View 6 Replies
Mar 22, 2010
How can I make use of Bullets in Labels and Textboxes? I want the user to enter text into a Textbox and after he/she is finished hit the Enter key, then a Label must display a Bullet followed by the text entered in the Textbox. Hendri Bissolati (Novice programmer)
View 3 Replies
May 15, 2011
I'm trying to write code that can print only filled text boxes in the form and then print the label near them. I searched and thought the code below is the end result I could reach.[code]...
View 1 Replies
Jan 13, 2012
I have run into another problem with my current project. I have a form that I need to print. Doing some searching online I found a few examples and implemented it into my code. It prints but prints all my text boxes and labels stacked on top of one another. How can I get this to print my textboxes and labels formatted as I have them in the form?
Here is my code:
Private Sub PrintToolStripMenuItem1_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles PrintToolStripMenuItem1.Click
PrintDocument1.PrinterSettings.Copies = 2
PrintDocument1.Print()
[Code] .....
View 1 Replies
Jul 8, 2011
I remember that in VB5 there was an "auto-redraw" property that needed to be turned on in order to make certain features refresh themselves. I'm having trouble with getting labels and text boxes to change in VB2005.A sample code snip would be
Label1.text = "Zero"
Sleep (1000)
Label1.text = "One"
[code]....
View 18 Replies
Apr 5, 2012
I've been looking into the SaveFileDialog and OpenFileDialog features, but have been failing to implement them. The actualy program that I would be implementing this in is much larger, so alternative methods are welcomed.
[Code]...
View 10 Replies
May 17, 2012
My textboxes and labels are fine in design view, but when I switch over to Debug or Build, a couple of the textboxes are pushed together and the labels aren't in their original spots.Haven't seen this before and was wondering if anyone has any suggestions as to why and how to fix?
View 12 Replies
Feb 7, 2010
How can i make my app in a different language, so people can select another language,I need to translate some buttons, textboxes and labels.
View 2 Replies
Jun 16, 2009
I am trying to add an unicode character like this one to lets say listview item. I load character from file to string and from string i create a listview item with text same as string () all I get is charater like box.. interesting is that when I copy that character to program supporting unicode I get original char back ().. I tried everything. Searched a lot on internet and forums.. Question bothers me since yesterday, and my project can not continue without unicode support in basic form controls such as textbox.
View 4 Replies
Apr 28, 2009
My current project involves displaying questions/answers from two different databases to be used to compare values and make judgements. The number of questions, choices, and answers is all variable. Thus I am attempting to create labels dynamically to show the information on the screen and create textboxes to leave comments. My problem is not knowing how to then access these lables, since I can't code in to use "label_comments" & (i) as it doesn't exist (at least, I can't get it to work).
First, my code for creating and displaying the information:
db_connection = New SqlConnection(ConfigurationSettings.AppSettings("ConnectionStringMerrill3"))
db_connection.Open()
[Code].....
View 6 Replies
Dec 7, 2009
I'm creating a series of labels at run time based on an array of strings made earlier in the program, but when i run, the labels aren't showing. The program is form based and the co-ordinates for the new labels are well within the bounds of the formHere's the code I'm using:
For i = 0 To 10
Dim lbl As Label
lbl = New Label
[code]......
View 2 Replies
Jan 18, 2010
I have a form on which I want to place labels created by code executed by clicking a button(cmdAddLabel) at run time. I subsequently want to move the newly created labels around on the form. The following code sucessfully creates the labels at run time whenever the cmdAddLabel button is clicked:
Private
Sub cmdAddLabel_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdAddLabel.Click
Dim
[Code]....
View 2 Replies
Sep 28, 2011
The three labels "Floor" "Typ." "HeadsI can insert once fine but multiple times only the third instance is written to the form.I have 2 textboxes to test that the Label.Name is changed but I can't make the Label.text stand for each label. I am certain this will occur too with the textboxes.I also need to keep track of these boxes for further use with the program.
Public Class Form1
Private Sub CheckBox1_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CheckBox1.CheckedChanged
[code]....
View 1 Replies
Sep 21, 2011
I tried to create a ghost text using Labels over the Textboxes. I am using VB.Net2005. I accomplished this with this code:
Public Class frmDataEntry
Private Sub PhantomTextLastName()
If txtLastName.Text = "" Then
[Code].....
Is there any way to reduce this code, so that when I try to add another Textboxes I'll never have to retype a bunch of codes. I have basic knowledge n using Module and Class
View 3 Replies
May 10, 2012
I have a program with about 350 textboxes (about 50-60 of which are not visible to start) and with the click of a CheckBox I'm looking to make them visible.
View 4 Replies
Mar 29, 2009
I have wrote a program to help me arranging roster of 4 workers.The program is putting textboxes and labels on form1, textboxes and labels are interactive each other and calculate total working hours. how can I print out the "form1" ?
View 3 Replies
