Is there a way to hide the scroll bars on a VB.Net panel? We have written code to allow the user to scroll using a touch screen and do not need to see the scroll bar. I know it has to be there for the scrolling to work, but would like to hide it from view.
View 3 RepliesI have two panels, and I want them to both scroll horizontally with one scroll bar, but I only want one of them to scroll vertically. So if I have a large panel on autoscroll, it works fine for that panel, but I have another smaller panel above that, could I make the smaller panel scroll horizontally with the larger panel's horizontal scrollbar?
View 2 RepliesI am loading several command buttons into it (one in each grid box). I have the panel set to autoscroll. When TableLayoutPanel is set to AddColumns, all works well. However, I dont want horizontal scroll, I want vertical. When I set TableLayoutPanel to AddRows, a vertical scrollbar will not appear.
View 4 Repliesi have 2 controls on a form. Panel1 and picturebox. I am using the following code to zoom in.
PicBox.Width = PicBox.Width + 100
PicBox.Height = PicBox.Height + 75
'PicBox.Left = PicBox.Left - 50
'PicBox1st.Top = PicBox.Top - 20
i am also using the following code to try and scroll whilst zoomed in
Inherits System.Windows.Forms.Form
Private m_PanStartPoint As New Point
Private Sub picbox_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles PicBox.MouseDown
'Capture the initial point
[code]....
I have set the panel to autoscroll and added scroll bars but they do not scroll far enough... They only scroll about 2cm.
This is for a mapping/plotting program.
t.panel is the main panel and it has too much content to fit in one screen so there are scroll bars. x.panel contains the horizontal scale for the data points in t.panel. I drew the scale using a bitmap and set it as x.panel's background.
Setting x.panel's horizontalscroll.value = t.panel's horizontalscroll.maximum doesn't seem to work. I think this is because x.panel's doesn't have any content that causes it to need scroll bars.
I have a panel on my winform that is one third of the form size. I need to insert 4 datagidviews side by side into the panel. The user should be able to scroll horizontally to view each DGV. I can position the DGVs side by side within the panel but it does not scroll the whole horiz way to see all the DGVS.
View 1 RepliesI have a Panel and a button control on windows form. Button is placed behind the Panel. I want to change the opacity of Panel, so that the button control can also be visible. But there is no property of panel control to change the opacity. Is there any way to make the Panel Opaque in this way?
View 7 RepliesIn my program, The user will choose a number from the combo box. And also in my form I have 14 panel. This panels are enable=false. Now my question is, I want to enable this panels somewhat related to the input of the user. I manage to get the formula to HOW MANY PANELS are to be enable in this manner: userinput / 0.5 = panels to be enable.
View 5 RepliesI am using a flowpanellayout. I want to scroll the panel, but not using the scrollbars. (We are going to use a touch screen). I am going to use button to scroll up and down. How can I control that?
View 2 RepliesHow do I code to scroll the panel using the mouse wheel when the mouse pointer is over the panel using the actual scrollbar?
View 1 RepliesI wantt o scroll images up & down,I found the foll code that uses APi to scrool.[code]....
View 1 RepliesI am currently working on a web browser using visual basic and i think i am stuck at this point where i have a panel and i need to scroll it when mouse hovers a button .. actually if i can find how to scroll the panel without using the scroll bar , i think i can modify it for using it with mouse hover. [code]...
View 5 RepliesI have a winform with a main panel that is anchored top, left; dock: fill, and set to a specific size to contain another panel of content that we want to scroll through. The other panel along with a few other controls are on the main panel. Now, for some reason, after running the application the controls will be shifted down (never horizontally) some random amount. Now, the "random amount" may in fact be the last position of the scroll bar or something, but either way, it is unintended functionality. I have resorted to automatically resetting the locations of these controls on the main form in the constructor?
View 1 Replies I am trying to control the horizontal scroll of a panel box in vb.net. The problem is that I can only seem to move it just a little bit using the following code:
Private Sub HScrollBar1_Scroll(ByVal sender As System.Object, ByVal e As System.Windows.Forms.ScrollEventArgs) Handles HScrollBar1.Scroll
panSS.HorizontalScroll.Value = HScrollBar1.Value
End Sub
[Code].....
I am having a tough time in vb.net to make the scrollbars to work of the contents of a panel.... here is my code
Private Sub HScrollBar1_Scroll(ByVal sender As System.Object, ByVal e As System.Windows.Forms.ScrollEventArgs) Handles HScrollBar1.Scroll
Panel122.Left = HScrollBar1.Value
now, i want to change .Left to .Right, but it won't let me?
Is there a way to get and set the location of the scroll bars in a panel?
View 2 Replieswhich populates a flow layout panel with a number of buttons. The number of buttons is completely dynamic (it's based on how many subfolders are in a given Directory.)What I want to be able to to is use two buttons to scroll up and down the panel, without the use of scrollbars.I've spent a good few hours looking around trying to find a solution (as well as messing around with the 'verticalscroll' properties of the panel with code, but with no success.
View 2 RepliesI am adding user controls to a panel that is empty, but when i do that, the scroll of the panel goes down.
I tried to set the panel.verticalscrol.value to 0 but that does not do the trick, so..
I'm trying to make an autoscroll enabled panel that will scroll if the mouseposition.x > panel.location.y However, I cannot seem to find a panel.scroll() function. Is there a way to programable make the control scroll?
View 1 Repliesi put Picturebox in the Panel control i set Autoscroll Propertu of Panel set to True i maximize the size of PictureBox OnClick Event of PictureBox
PictureBox1.Size =
New Size(PictureBox1.Width + 50, PictureBox1.Height + 50)i want to Center and Clicked Location mean adjust the scroll of Panel according to the Clicked Location like Windows Picture and Fax Viewer?
i put Picturebox in the Panel control i set Autoscroll Propertu of Panel set to True i maximize the size of PictureBox OnClick Event of PictureBox
PictureBox1.Size =
New Size(PictureBox1.Width + 50, PictureBox1.Height + 50)i want to Center and Clicked Location mean adjust the scroll of Panel according to the Clicked Location like Windows Picture and Fax Viewer?
I have a picturebox inside a panel, the picturebox is long, and the panel is set to allow scrollbars, which it adds. I can scroll the picture at design and runtime, but how do you scroll it programmatically?
Starting with the picture box with the top set to 0, and then doing this... (using any non-zero value as the lY value)
Dim newLocation As New System.Drawing.Point(0, -lY)
[Code]....
So how do i get the value to change (e.g. to scroll the picturebox!)
I have a problem when I add a button dynamically to a panel with scroll bars.
View 1 RepliesI've dynamically added 20 pictureboxes to a panel and would like to see the panel scroll when I use the mouse wheel. To implement this I have tried to set the autoscroll to true on the panel control. Here is the code.
For i As Integer = 1 To 20:
Dim b As New PictureBox()
b.Image = Nothing
[Code]....
It works for "button" control, but not for the "picturebox" or "label" controls?
How can I implementthe scrolling affect using 'mousewheel'?
I'm trying to run an app (GacUtil) which is normally run through a console window, directly in my winforms app, but I keep getting the error:
"The system cannot find the file specified"
Here is the
Dim AppName = "gacutil"
Dim BaseOptions = " /i"
Dim oStartInfo As New ProcessStartInfo
Dim sFull As String
Dim sStartPath As String = Path.GetDirectoryName(TextBox1.Text)
[Code] .....
In this case, the DLL is in C:, and 'GacUtil' has been added to the Environment path variable.
I can put a break point on the next to the last last line, copy and past the output of the 'sfull' variable into a command prompt and it will run perfectly. (I've tried adding oStartInfo.UseShellExecute=False, removing the whole workingDirectory property line and just changing sFull so that it has the Startpath also, but I still get the error)
However, when I try it in the Winforms app I'm creating, I get the error.
Process.Start(oStartInfo)
I have a custom collection which is derived from a base class implementing IEnumerable and IEnumerator, this collection is populated with custom objects.I'm trying to set the datasource on a ComboBox on a WinForm to use the above collection - but when the code is run the ComboBox is always empty.
The code I was using was this:
Private Sub ViewSources_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load
' declaration
Dim sourceCollection As SourceCollection
Dim source As Source
[code]....
I have a program that adds controls on the fly to an auto-scroll panel. When the panel is scrolled (viewing the bottom of the panel for example) and a control is added, it looks like it is added assuming the top left corner of the panel is still at 0,0 when in fact it may be 0,500. To see what I am talking about, create an empty "Windows Forms Application" project and insert the below code into it.
Friend WithEvents Panel1 As System.Windows.Forms.Panel
Friend WithEvents btnAdd As System.Windows.Forms.Button
Dim ButtonCount As Integer
[code]......
i have a windows form that has a web browser control.
i need to pass the value from the windows form to the html doc.
here is my problem.... can pass the value across to to a function in the html page but when i try to pass the same value to an image tag in the same document it does not read the value.
here is my code from the winform
If e.Url.Equals(wb1.Url) Then
wb1.Document.InvokeScript("fetchImage", New Object() {path})
End If
it passes through the variable 'path' to a function in the html doc.
heres the code for the html doc.... this part of the code works
function fetchImage(path) {
var now = new Date();
var zm_image = new Image();
[Code]....
In my project I am create a form which has a scroll bar. When the form loads, it is scrolled to the bottom of the form. I want it to appear at the top of the form so the user can see the information at the beginning, rather than having to scroll up to see the tiop of the form. I have tried using focus() on the header label and this piece of code, but neitehr have worked:
[Code]...
All I want to be able to do is push a button a to load a resources text file into a textbox , I have managed to do this after hours and hours of googling , videos, but it's quite a long document and I was wondering if I can have a scroll bar so it doesn't end half way through the text?
View 3 Replies