Game Programming :: Using Arrow Keys To Control Panning/sound Output?
Feb 10, 2009
i am trying to develop a program which will:to beging with, allow a user to use the left and right arrow keys to control the panning of a particular sound on loop. the actual panning dosent have to be programmed i could just instruct the program to play out the corresponding pre recorded panned sound?once achieved i hope to then develop the program to test a users ability to pan one sound to match a stationary sound at a given angle. i will need to record the time taken to achieve this, the number of key presses made and how accurate their answer was.i am using visual studio 2005 to build my program?
View 1 Replies
ADVERTISEMENT
Oct 21, 2008
I have a problem detecting whether one of the arrow keys is pressed, all the other keys seem to be detected apart from the arrow keys??? I have set key preview to True........ It detects the arrrow keys BUT ONLY if I have NO other controls on the form??? example..
Me.Text = e.keycode
It works, but then if I add a button for example, it stops.
View 3 Replies
May 23, 2010
So I found this little morpg. The game is fun but really repetitive. I would like to simplify some of the tasks in the game. I do not know how to start this project. How can I recored arrow keys and then tell the computer to enter the arrow keys? One of the objectives in the game is to run around a farm 2x and scare away any wolfs. So the commands would be "arrow key up" for 30sec and then "arrow key right" for 4 sec and repeat. I have worked with robots in real life for some time. We would fill arrays with such instructions. One of the most fun things to program! But I have no idea how to do this in VB.
View 12 Replies
May 7, 2009
I wrote a program for a stopclock with button control. The button control is to start and stop the clock. How can I use the arrow keys, instead of the mouse click on the button, to start stop the stopclock.
View 8 Replies
Jan 17, 2010
To programming and have a question with sound files. I am trying to figure out the basics and here is what I did: I created a button that is supposed to play a sound.
My.Computer.Audio.Play("C:.......file.wav")
When I click this button in my .exe file it obviously plays because I am using the computer with the above location for the .wav file. When I use the .exe on another computer it doesn't play because it does not recognize that .wav location. How do I make this work for me? Do I need to embed the .wav with my .exe somehow?
View 4 Replies
Jan 28, 2010
I'm trying to control him using the arrow keys.
I've already tryed using the case key event handler, but I must be using it the wrong way, because VB 2008 express (what I'm using) produces a bunch of errors("Type expected" as well as it won't work). This is what I've tryed:
Private Sub GameField_KeyDown(ByVal Sender As Object, ByVal E As
System.Windows.Forms.KeyEventArgs) Handles MyBase.KeyDown
Select Case E.KeyCode
[Code]....
View 4 Replies
Apr 23, 2009
How can I stop that?
View 1 Replies
Nov 12, 2008
If a tab is highlighted and you hit the left/right arrow key, it goes to the previous/next tab. I want to remove this functionality. I only want the user to be able to change tabs with the mouse click.
View 5 Replies
Jan 21, 2009
I want to make a Pac-man game, or something close to it, but I don't know how to make the image of Pacman rotate and move when different arrow keys are pressed. How would I go about making a code that moves an image when an arrow key is pressed?
View 10 Replies
Jun 12, 2011
so I've begun developing another little rpg like game w/ visual studio 2010. I'm trying to have the arrow keys control a little square in the form but I've searched all over the internet and haven't found too much useful info. So first thing's first, how can i make a key perform an action, and then, if you know how, what code do i use to make it move the square on the form.
View 3 Replies
Apr 20, 2008
i need to loop through 9 Buttons in a Tic Tac Toe program to reset my O&X's, rather than setting each button.text individually, how can i loop through these?
View 4 Replies
Jun 3, 2011
I want a dialog box to have FULL overridable control over all other windows open within my program. I have done this with my about box but have forgotten what I have done to make it have FULL control over the program, that the user has to either to click OK or cancel to move on with the program.I'm pretty sure it was a property I changed, but after searching numerous times, I'm am lost as to what makes it behave in that way.
View 2 Replies
Apr 4, 2008
After going through some tutorials I set out to work on my own game. Right now it's simple, I have a ship that moves left, right and shoots. I also have Asteroids that fly at the ship.
The problem is that I have 3 asteroids in an array, and they all act the same... I would like random speeds and directions.
here is what I have in relevant code:[code....]
View 7 Replies
Aug 24, 2011
I'm ready to start adding sound to a 3D game and I'm looking for a decent Free library.it would not require DX and be something like:
dim MySound as SoundLib.Sound
MySound = SoundLib.LoadSound("soundfile.wav")
SoundLib.Play3DWorld(Location.X, Location.Y, Location.Z, VolumeModifier, MySound)so far all Im finding is expensive, C#, old, or not .NET compatible.
View 9 Replies
Dec 18, 2010
I want to change the "a" and "d" to key controls left and right perspectively. and I am having some trouble wiht the key up event. KeyChar works for KeyDown (after I forced it to) but not for KeyUp (even though they share the same things). I finally figured out how to get the picturebox to change its picture, but now I am stuck at this part. getting an animation in, and when im done moving, get the animation back to the idle picture. im also having a little bit of trouble with movement. pictre - as a split second of movement and (space) as a split second of not moving, when i begin moving, lets say it goes this way (there is a space right after the first -, so that was a split second that it stopped and then started continuously started moving again). how can i make it so it goes nice and fluid once you start moving? also, if i were to press any single key while holding A or D down, it either stops and i have to press the key again to move it move or, it goes in the other direction(if I hit a then d, or d then a). and in the key up event, id like it so when the a (or d) key is up, it goes back to the stand animation, and when moving, it goes to the moving animation. [code]
View 12 Replies
Aug 23, 2011
I use the up arrow means , it must goto the previous text box and if i use the down arrow means , it must goto the next text boxes. Totally i m used 15 textboxes. From text box1 onwards, if i use the down arrow means goto the next textboxes and also repeated to all text boxes.(1 to 15) From text box15 onwards, if i use the up arrow means goto the previous textboxes and also repeated to all text boxes. (15 to 1)Nithiyanantham
View 5 Replies
Oct 1, 2009
I have an image viewer application which consists of a Panel with a picture box on it. I want to use the arrow keys to iterate through the images in a folder. I have programed other keyboard shortcuts and all of them work except for the arrow keys, my program does not even acknowledge the KeyDown or KeyPress Event with the arrow keys. [code] As I said, all key events will fire the KeyDown with exception of the arrow keys.I have tried the Keypress event also and had the same problem
View 3 Replies
Jun 21, 2010
I have the following code which works pretty fine with Listview. But I would like to use it with computer keyboard up/down arrow keys. How to modify the following code?
CODE:
View 8 Replies
Jun 16, 2011
How will I navigate the buttons using the arrows keys? Example, from button Broccoli, I want to go to button Portobello Mushroom, i will just press arrow down. But it is not working. For me to reach button Portobello Mushroom, I have press the arrow right 6 times. How can I use the arrow down?
View 1 Replies
Apr 6, 2011
How can I check if an arrow key (dunno, the right key for example) is pressed?
View 1 Replies
Nov 28, 2009
I had previously made a simple Pong program which use keyboard to control. The control includes "s" to start the game, "p" to pause, "r" to resume and left, right to move the paddle specifically. This program work with little problem. The first problem I encounter is if I insert even one single button on the form to display instruction, the arrow keys will no longer work. But I get around it by using Menu Strip instead.
Then, I am required to put this program, among others into a MDI program. And this is where the problem happen. If I have this Pong game loaded, and I press "s", "p", or "r" keys, it have no problem, but if I press the "left" or "right" keys, it will not move. I am speculating that maybe the focus is lost when arrow keys is pressed or something similar, but I have absolutely no idea what is happening. I have tried giving focus back to the form if focus is lost, but to no avails. And this is the code for the movement of the paddle. This reside on a form, the movement itself is passed to another class. The MDI parent is on another form. [Code]
View 2 Replies
Oct 29, 2009
I would like to make a simple game but i do not know how to make the arrow keys control buttons.
View 10 Replies
Mar 8, 2009
I want to update some things on the form when the user clicks a new date (or changes the month, which automatically selects a new date). If I use the DateSelected event, it seems to work as expected when I use the mouse. However if the arrow keys are used, the event does not get triggered. If I use the DateChanged event, it seems to go into an infinite loop. The message box pops up a zillion times when I click the arrow to change the month:
Private Sub MonthCalendar1_DateChanged(ByVal sender As System.Object, ByVal e As System.Windows.Forms.DateRangeEventArgs) Handles MonthCalendar1.DateChanged
MessageBox.Show("DateChanged")[code]....
The only problem with using the DateSelected event is that if the user uses the arrow keys, the event is not fired. I thought I could fix this by disallowing the use of the arrow keys, but I couldn't find anywhere to do that.
View 4 Replies
Oct 10, 2010
I have been trying to figure this out all night, so I figures it's time to ask you guys.
I can't figure out how to make a picture box move when a key is pressed. It works fine if I use a button.[code]...
View 9 Replies
Mar 8, 2010
I am making a project using the GDI+ interface and have drawn the shapes but I need to move them using the arrow keys. Does anyone know how I would accomplish this?
View 3 Replies
Sep 13, 2009
I have been searching all over the internet for the answer to my problem; How do I move an object according to the arrow keys pressed? I have this code;[code...]
It builds all right, but nothing happens. I have the KeyPreview on, but it still doesn't do anything.
View 2 Replies
Dec 28, 2009
I have a group of textboxes for a tab editor. 6 vertcle, 25 horizonal. ( numeric guitar sheet music) I want to be able to navigate them with the arrow keys. If I number them in chronological order from the bottm left, the up arrow key would be "+1", down arrow key "-1", the left key "-6", & the right arrow key "+6". That way I can navigate any possible way on the array. My question is, "How do I do this in code?". ( I have never had a school coarse of any kind in programming-learning VB Express at home.)
View 11 Replies
Sep 27, 2010
i have a doubt as to how to set left key using setkeyboardstate in VB.net?
i went through other threads but still couldnt get it
View 4 Replies
Feb 28, 2010
I need to capture the left and right arrow keys in Form1.KeyDown event so I can use them as hot keys. Instead they seem to be assigned to tab order (move focus to previous/next control) and the KeyDown event never gets called. How can I remove the arrow keys from tab order and use them for my hot keys instead?
View 2 Replies
Apr 2, 2008
im trying to make a game in visual basic in which your character can move around, jump, and kill things. I can get the picture box with the character to move and everything is fine. but i did run into one problem. when the character moves over a tree (or something) you can see the gray backround of the character as i made in paint. how do i make the backround of the picturebox transparent?
View 4 Replies
