Get Elevation Value Of Given Latitude And Longitude From A DEM File In 11x11 Matrix?
Apr 2, 2009
I need to display or get the elevation value of a given latitude and longitude from the DEM file in 11x11 matrix array.Actually I have a DEM file and corresponding HDR file of it.And, the DEM file is 6000x4800 Matrix with 57600000 data's.Now, I worked with some codes where I can able to get the elevation of a Given latitude and longitude.But, When I Zoom IN or OUT,the Latitude and Longitude values changes so,when I pass the changed latitude and Longitude value,I could not able to get the elevation value.The reason is,
In the 6000x4800 matrix the Resolution of the X and Y is large,so when we Zoom IN or OUT the resolution changes and could not display the elevation value.But, where as if we get the elevation values in 11x11 matrix array,since it has 121 data's only, the resolution value will be small and even when we Zoom IN or OUT and pass the changed Latitude and Longitude, we could able to get the elevation.[code]....
My work is, I have a DEM file and header file of it.Now, I want to display the elevation value from the DEM file of the given Longitude and Latitude.And, I worked on it before,Where I could get the elevation value with the resolution matrix of 6000x4800 and I can able to read the elevation value.But, now I want to modify in such a way that I should read the elevation values from the DEM file with the resolution matrix of 11x11.So, kindly guide me in getting the elevation value with resolution of 11x11 matrix.The code I have used before to display the elevation value with resolution of 6000x4800 are:
I have a HDR file and DEM file,I want to generate the Latitude and Longitude values from the header file.Where that values are is used to list the elevation values from the DEM file.The file contains the data's like:
I have a HDR file and DEM file,I want to generate the Latitude and Longitude values from the header file.Where that values are is used to list the elevation values from the DEM file.The file contains the data's like:
I'm trying to make a longitude and latitude converter. I use Google maps to get longitude and latitude for my handheld GPS but there longitude and latitude is a different type then my GPS uses. I have to convert it before putting it in my GPS.
I made a very simple program using VB 2008 that open up right to Google maps and at the top of the program i want to put the converter.
I have done a lot of research and still i am not able to wright a code that will do the conversion. For the conversion Need to multiply the decimal part of the longitude and latitude by 60
For example if i had 40.313043,-97.573244 I would multiply .313043 by 60 witch = 18.78258 and then i would multiply .573244 by 60 witch = 34.39464 The finale longitude and latitude would be 40 18.782, 97 34.394
I have a DEM file(Digital Elevattion Model File) and I am trying to open the file,where we have Latitude and Longitude values inside the DEM file.And, Now I have opened the file using Filestream and Read the file using BinaryReader.But, I am having a trobule in getting the values of Latitude and Longitude.I am getting Byte values randomly as 1,202,31,271 etc.But, we dont have latitude and longitude values more than 180,and also I am not getting 16 bit UInt values.For example, the values should be like Latitude 20.00416666666667 and Longitude 39.99583333333333.So,read the correct Byte values of the DEM file.The code I have used till now is:
Dim fs As FileStream = New FileStream("C:UsersadminDesktopHeader and DEM fileE020N40.DEM", FileMode.Open, FileAccess.Read) Dim rd As New BinaryReader(fs) Dim convertDB As UInt16 For i = 0 To rd.BaseStream.Length
I'm developing a database in VB.NET-Code First. I would like to add Latitude and Longitude to both Locations and Postal Codes. Right now i'm adding a GeographicCoordinate to each class.
I'm looking to create a csv file of image_names, latitude, and longitude extracted from EXIF headers of several jpegs. I'm having trouble parsing the lat and long byte array items to decimal or ascii. Here is what I have so far.[code]...
Dim Latitude As Double = row("fltLatitude") Dim Longitude As Double = row("fltLongitude")
Most of the lat/longs that are being fetched from the db using SP are retrieved in properly, except for a couple of records which do not include a period to indicate a lat/long value.I have tried using these:
I want to convert British OSGB 36 co-ordinates to WGS 84 (i.e. "standard" latitude and longitude), in order to plot them into a KML file for Google Earth.I should probably add that my question is not "How do I write a KML file?". My question is "How do I convert between these 2 co-ordinate systems?"!!I was hoping there would be a library that I could use, rather than rolling my own function - it seems like the sort of thing some-one else would have implemented.
In need vb6 program Works with GPS. I want this program to works with GSM Modem, which is receiving a SMS Inside the message the longitude and latitude. I want the program view the coordinates on the map in [URL].
I have a table with long/lat values and another table with a project-id and long/lat/radius (circle).Now I need to find out which project matches the long/lat values from the first table.Is there an easy way to do that?
If there is a formula to change a latitude and longitude into a single number? I plan to use this for a database table in software that provides routing for deliveries. The table row would have that number as well as the postal address. The database table would be sorted in ascending numeric order so the software can figure out which address the truck would need to go to first, second etc.
For example I would use the following numbers for the latitude and longitude: Lat = 40.71412890 Long = -73.96140740
Additional Information: I'm developing an Android app using Basic4Android. Basic4Android uses a VB or VB.Net syntax with SQLite as the database. Part of this app will have route planning. I want to use this number as the first column in an SQLite table and the other columns will be for the address. If I do a query within the app that sorts the rows in numerical ascending order, I will be able to figure out which postal address are closest to each other so it will take less time for me to go from house to house.
For example, if the numbers were: 194580, 199300, 178221
I can go to postal address 178221 then to 194580 and finally to 199300 and I won't need to take the long way around town to do my deliveries after they were sorted. As an alternative, I would be happy if there was an easy way to call a web service that returns maybe a json response that has the single number if I send a postal address to the web site. Basic4Android does have http services that can send requests to a web site.
calculate the gps coordinates of points of a specific distance, namely 22 feet apart, on the circumference of a circle. I know the beginning gps coordinates and the radius. I am pretty sure the haversine, or the speherical law of cosines has the answer, but its been a long time since I have used any trig formulas and I cant figure it out. I am using decimal degrees and am programing in this vb.net.
I have scanned a map which was in UTM WGS 84 projection system. The scanned map is now in jpg format and loaded into picturebox. If I select a point, how could I know that point's latitude and longitude? How could I integrate a projection system over the image displayed in picturebox?
Create a function named DecimalDegrees to refactor the code that converts a latitude or longitude into a value in decimal degrees. (This function will be used inside the functions ValueOf and Distance.) Task 2a: Write the code for the function DecimalDegrees with an input parameter for DegreeString as type string, and returns the value as type Double.
Here is my code for the function part Private Function DecimalDegrees(ByVal DegreeString As String, ByVal degrees As Double, ByVal minutes As Double, ByVal seconds As Double, ByVal ID As Integer) As Double
I am having difficulties with the 2nd part which is I believe to take the code for the calc1 and calc2 buttons and somehow get it to convert to decimal degrees by the function I have created. The buttons would then be removed as the code would automatically take the latitude and longitude and convert the degrees, minutes and seconds into a decimal.
Here is the code for the current buttons: Dim StartPtr, StopPtr As Integer 'To Replace Calculator 1 Button 'Convert degrees before passing argument - Latitude StartPtr = 0 [Code] .....
I am writing a small aspx web application that takes in forum information after validation and then opens a database connection and populates the proper columns with data.note: The database is a .sdf file created in web matrix My issue is that even with: Import Namespace="System.Data.OleDb" on the page I am getting: Type 'OledbConnetion' is not defined. I am extremly new to VB, I am coming from java and honestly I do not have all year to read vb code and take classes and read books. I need to finish this app for a client so I am kind of rushed.
I am trying to read the matrix (see this link [URL]
This matrix will be in text based file. How can I read this file and create a matrix and fill it in my code. The other question I have is that the matrix has first row and column with value as char and rest values are in integer, how can I take care of this?
Has anyone managed to get administration rights through the UAC without restarting the application or embedding a manifest file?
I'd like to write to some files that only administrators can modify, without relying to another elevated application. Is it possible to impersonate an administrator previously calling with some native API the UAC prompt?
I guess this is not possible and I'll have to use an external tool with elevated rights, but I'm asking just in case.
EDIT: I know there are some other similar questions around, but since they do not cover the topic of impersonation (as fas as I've seen), nor some possible native call to the UAC prompt I decided to give a new thread a go...
I designed an application in vb.net 2005 while using Administrator account on vista.After compiling the application it start requesting for elevation during startup.I will like to prevent this, because the customer is complaning
I have an application that creates files at certain directories, deploys them and then removes them when neccessary. Under Windows Vista and 7, access for my program to carry out such commands are denied because UAC is blocking it.Now i am NOT using Visual Studio, i am using SharpDevelop and my project is a Windows Form. How can i prompt the user with the UAC dialogue so my application can acquire UAC elevation and carry out its tasks?I would also like to point out that everything works perfectly when UAC is either turned off or the user runs my program with Administrator Rights.
I have an ActiveX EXE that is compiled with VB6, unfortunately because it exposes an ActiveX interface it refuses to run unless i embedd a manifest file into it requesting elevation priviliges of administrator.This in turn has the side effect of VISTA prompting the user to logon as administrator each time they run the application.The admin on site has already refused to disable UAC.Is there any way for either our application or the administrator to auto-elevate the program on the domain?
I have created a 2008 Visual Basic.NET application I'm using on Windows 7 that requires elevation. In myapplication I used the UAC manifest in VS 2008 to makere elevation. that works fine with a regular 2008 VB.NET form and will remember the form postion.On my application (really just a form) that requires elevation it will not save the position and always starts in the upper left of the screenDoes anyone know a way around this on an application created that requires elevation
