Any Formula To Change Latitude And Longitude Into Single Number?

Nov 27, 2011

If there is a formula to change a latitude and longitude into a single number? I plan to use this for a database table in software that provides routing for deliveries. The table row would have that number as well as the postal address. The database table would be sorted in ascending numeric order so the software can figure out which address the truck would need to go to first, second etc.

For example I would use the following numbers for the latitude and longitude:
Lat = 40.71412890
Long = -73.96140740

Additional Information: I'm developing an Android app using Basic4Android. Basic4Android uses a VB or VB.Net syntax with SQLite as the database. Part of this app will have route planning. I want to use this number as the first column in an SQLite table and the other columns will be for the address. If I do a query within the app that sorts the rows in numerical ascending order, I will be able to figure out which postal address are closest to each other so it will take less time for me to go from house to house.

For example, if the numbers were:
194580, 199300, 178221

I can go to postal address 178221 then to 194580 and finally to 199300 and I won't need to take the long way around town to do my deliveries after they were sorted. As an alternative, I would be happy if there was an easy way to call a web service that returns maybe a json response that has the single number if I send a postal address to the web site. Basic4Android does have http services that can send requests to a web site.

View 4 Replies


ADVERTISEMENT

Longitude And Latitude Converter

Nov 25, 2011

I'm trying to make a longitude and latitude converter. I use Google maps to get longitude and latitude for my handheld GPS but there longitude and latitude is a different type then my GPS uses. I have to convert it before putting it in my GPS.

I made a very simple program using VB 2008 that open up right to Google maps and at the top of the program i want to put the converter.

I have done a lot of research and still i am not able to wright a code that will do the conversion. For the conversion Need to multiply the decimal part of the longitude and latitude by 60

For example if i had 40.313043,-97.573244 I would multiply .313043 by 60 witch = 18.78258 and then i would multiply .573244 by 60 witch = 34.39464 The finale longitude and latitude would be 40 18.782, 97 34.394

View 5 Replies

Retrieving Longitude And Latitude?

Dec 18, 2009

how to retrive longitude and latitude, perhaps even diaplay several address on a map, be it google yahoo mapquest??

I want to add a feature that takes 6 propertys(houses) and measures the distance from each to the users location

View 1 Replies

.NET Code First Latitude Longitude Interface?

May 16, 2012

I'm developing a database in VB.NET-Code First. I would like to add Latitude and Longitude to both Locations and Postal Codes. Right now i'm adding a GeographicCoordinate to each class.

[Code]...

View 1 Replies

Convert From (x, Y) To (latitude, Longitude) And Reverse?

Jul 18, 2012

I would like to know about convertion from (x, y) to (latitude, longitude)?

For Example:

In my project(windows form - VB.NET) i have a Panel (control) and have a MouseMove Event then when i moving the mouse it have a location such as:

Label1.text = e.X
Label2.text = e.Y

So how to convert it to?:

Label1.text = Latitude(e.X)
Label2.text = Longitude(e.Y)

View 2 Replies

Get Latitude And Longitude Coordinates From An Address?

Nov 21, 2011

Is it possible to get latitude and longitude coordinates from an address in a vb.net application?

View 8 Replies

Read EXIF Latitude And Longitude?

Mar 19, 2010

I'm looking to create a csv file of image_names, latitude, and longitude extracted from EXIF headers of several jpegs. I'm having trouble parsing the lat and long byte array items to decimal or ascii. Here is what I have so far.[code]...

View 6 Replies

Set Of Latitude / Longitude - Find Which County?

Nov 29, 2010

I am new to vb.net, but i have good knowledge in Vb. I have a set of latitude and longitude, I need to find which county this set belongs to.

View 2 Replies

Convert Double To Decimal (latitude / Longitude) In .net?

May 24, 2012

I have a piece of code:

Dim Latitude As Double = row("fltLatitude")
Dim Longitude As Double = row("fltLongitude")

Most of the lat/longs that are being fetched from the db using SP are retrieved in properly, except for a couple of records which do not include a period to indicate a lat/long value.I have tried using these:

Convert.ToDecimal(Latitude)
CDec(Latitude)
decimal.Parse(Latitude)

but none of them are working.

View 1 Replies

Convert Latitude And Longitude From Decimal To Degree?

Mar 22, 2012

i have a decimal number like 35,23456834 the rapresent a latitude or longitude (in degree but with decimal form for the decimal )

My need is to transform that number in xx° - xx' - xx'' in a variabli of string

View 4 Replies

Convert OSGB 36 Co-ordinates To Latitude/Longitude?

Mar 18, 2009

I want to convert British OSGB 36 co-ordinates to WGS 84 (i.e. "standard" latitude and longitude), in order to plot them into a KML file for Google Earth.I should probably add that my question is not "How do I write a KML file?". My question is "How do I convert between these 2 co-ordinate systems?"!!I was hoping there would be a library that I could use, rather than rolling my own function - it seems like the sort of thing some-one else would have implemented.

View 5 Replies

Generate The Latitude And Longitude Values From The HDR File?

Mar 26, 2009

I have a HDR file and DEM file,I want to generate the Latitude and Longitude values from the header file.Where that values are is used to list the elevation values from the DEM file.The file contains the data's like:

BYTEORDER M
LAYOUT BIL
NROWS 6000
NCOLS 4800

[code]....

View 1 Replies

GPS - Receiving SMS Inside Message (Longitude And Latitude)

Jun 10, 2010

In need vb6 program Works with GPS. I want this program to works with GSM Modem, which is receiving a SMS Inside the message the longitude and latitude. I want the program view the coordinates on the map in [URL].

View 1 Replies

How To Generate The Latitude And Longitude Values From The HDR File

Apr 19, 2012

I have a HDR file and DEM file,I want to generate the Latitude and Longitude values from the header file.Where that values are is used to list the elevation values from the DEM file.The file contains the data's like:

View 8 Replies

Sql Server - Point On Circle (Longitude/Latitude) In .NET/SQL?

Feb 15, 2010

I have a table with long/lat values and another table with a project-id and long/lat/radius (circle).Now I need to find out which project matches the long/lat values from the first table.Is there an easy way to do that?

View 2 Replies

Calculate Latitude And Longitude Along A Circumference Of A Known Circle With Known Distance

Jan 24, 2011

calculate the gps coordinates of points of a specific distance, namely 22 feet apart, on the circumference of a circle. I know the beginning gps coordinates and the radius. I am pretty sure the haversine, or the speherical law of cosines has the answer, but its been a long time since I have used any trig formulas and I cant figure it out. I am using decimal degrees and am programing in this vb.net.

View 3 Replies

Find Latitude And Longitude Of A Point On Image (scanned Map)?

Apr 28, 2011

I have scanned a map which was in UTM WGS 84 projection system. The scanned map is now in jpg format and loaded into picturebox. If I select a point, how could I know that point's latitude and longitude? How could I integrate a projection system over the image displayed in picturebox?

View 1 Replies

Get Elevation Value Of Given Latitude And Longitude From A DEM File In 11x11 Matrix?

Apr 2, 2009

I need to display or get the elevation value of a given latitude and longitude from the DEM file in 11x11 matrix array.Actually I have a DEM file and corresponding HDR file of it.And, the DEM file is 6000x4800 Matrix with 57600000 data's.Now, I worked with some codes where I can able to get the elevation of a Given latitude and longitude.But, When I Zoom IN or OUT,the Latitude and Longitude values changes so,when I pass the changed latitude and Longitude value,I could not able to get the elevation value.The reason is,

In the 6000x4800 matrix the Resolution of the X and Y is large,so when we Zoom IN or OUT the resolution changes and could not display the elevation value.But, where as if we get the elevation values in 11x11 matrix array,since it has 121 data's only, the resolution value will be small and even when we Zoom IN or OUT and pass the changed Latitude and Longitude, we could able to get the elevation.[code]....

View 1 Replies

Read Longitude And Latitude From Photo Taken On Windows Phone 7 Samsung?

Apr 22, 2011

How can I read Longitude and Lagitude from photo taken on Windows phone 7 Samsung?

View 1 Replies

VS 2010 - Convert Latitude / Longitude Into Values In Decimal Degrees

May 30, 2011

Create a function named DecimalDegrees to refactor the code that converts a latitude or longitude into a value in decimal degrees. (This function will be used inside the functions ValueOf and Distance.)
Task 2a: Write the code for the function DecimalDegrees with an input parameter for DegreeString as type string, and returns the value as type Double.

Here is my code for the function part
Private Function DecimalDegrees(ByVal DegreeString As String, ByVal degrees As Double, ByVal minutes As Double,
ByVal seconds As Double, ByVal ID As Integer) As Double

I am having difficulties with the 2nd part which is I believe to take the code for the calc1 and calc2 buttons and somehow get it to convert to decimal degrees by the function I have created. The buttons would then be removed as the code would automatically take the latitude and longitude and convert the degrees, minutes and seconds into a decimal.

Here is the code for the current buttons:
Dim StartPtr, StopPtr As Integer
'To Replace Calculator 1 Button
'Convert degrees before passing argument - Latitude
StartPtr = 0
[Code] .....

View 9 Replies

Read The Latitude And Longitude Byte Values From The DEM File (retrieving Binary Values)?

Mar 23, 2009

I have a DEM file(Digital Elevattion Model File) and I am trying to open the file,where we have Latitude and Longitude values inside the DEM file.And, Now I have opened the file using Filestream and Read the file using BinaryReader.But, I am having a trobule in getting the values of Latitude and Longitude.I am getting Byte values randomly as 1,202,31,271 etc.But, we dont have latitude and longitude values more than 180,and also I am not getting 16 bit UInt values.For example, the values should be like Latitude 20.00416666666667 and Longitude 39.99583333333333.So,read the correct Byte values of the DEM file.The code I have used till now is:

Dim fs As FileStream = New FileStream("C:UsersadminDesktopHeader and DEM fileE020N40.DEM", FileMode.Open, FileAccess.Read)
Dim rd As New BinaryReader(fs)
Dim convertDB As UInt16
For i = 0 To rd.BaseStream.Length

[code]....

View 14 Replies

Efficient Way To Get Number Than Using Distance Formula?

Dec 4, 2010

While learning to Orientate of the Last layers of a rubik's cube, I thought that it would be fun to make a vb.net application for it(I know that it's super hard to do)I'm starting around the center cube, but was wondering if I did a part right..I'm working with squares, and was wondering the length from one corner to another. [code] Trying to figure out the distance from the top left to bottom right,I used the distance formula to test it out and got 70.71067811865475 sqrt((-50-0)^2+(-50-0)^2)Is there an easier or more efficient way to get this number than using the distance formula?

View 2 Replies

Implementing Radio Buttons - Select One Of Them To Use One Formula, And Then Select The Other To Use Another Formula

Feb 20, 2009

I want to place two radio buttons in so I can select one of them to use one formula, and then select the other to use another formula. I want to use the I=P(1+r)^n formula and I=P(1-r)^n formula with the radio button text showing Appreciation and Depreciation.

Heres my copy of the original code.

Public Class Form1

Private Sub cmdExit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdExit.Click
End
End Sub

[CODE].......................

View 5 Replies

Byte Conversion To Single Number

Aug 4, 2010

I am totally new with VB.NET. I have started coding for Modbus protocol. The response that I receive from the slave is as below -

01 = byte slave id
03 = byte function code
04 = byte -no. of bytes sent by slave
00 = byte(8 bits) (Lower Register MSB)
00 = byte(8 bits) (Lower Register LSB)
64 = byte(8 bits) (Upper Register MSB)
00 = byte(8 bits) (Upper Register LSB)
2bytes for crc

Now I want the value of 64 00 00 00 into floating point number in Vb.net . I think in vb.net its single as its 32bit floating precision number. Now the bytes that I need are 00 64 00 00 but if i process in this way the output is different, so I tried manually putting the data into the byte array and found out that I need 64 00 00 00 to be processed so that i can get desired output.

View 1 Replies

Assign A Number To A Single Variable It Does Not Equal The Same Value?

Nov 2, 2010

I have been searching the internet trying to understand in its simplist form why this behavior happens.

Dim mysingle As Single = 456.11 Dim mybool As Boolean = mysingle = 456.11

In the lines above mybool becomes false. I found this behavior when putting the single into a double I found extra digits showing. The .net documentations states a single is an approimate value I gatehr a single is a 32bit floating point number? But why are extra digits appearing when I have explicitly said what the number is.. surely the memory should store that numbers either side of my number are 0 to fill up the memory location?

View 3 Replies

Turning The Number From An Array Into A Single String?

Nov 3, 2009

ow would I go about turning the number from an array into a single stringsay for example I had:

Dim MyArray(4) as Integer
MyArray(0) = 1
MyArray(1) = 2

[code].....

View 2 Replies

Change A Single Rtb Word Color?

Jul 5, 2010

I am trying to change the color of a word in a rich text box.e.g. if u type if, and, end, sub into the vb code editor it will change blue.

View 1 Replies

Parse Single Line In Textbox But Make Each Word / Number A String On Its Own?

Nov 9, 2011

I am populating a textbox with a single line of numbers that I would like to seperate out into strings.[code]...

View 3 Replies

Change Single Cell Color Of Tablelayoutpanel?

Jul 8, 2011

I need to dynamicly write some VB.net code to change the colors of different cells in a TableLayoutPanel based on specific criteria. I have search for VB code to perform this but am unable to find any. I have found some C code that does it but I am unfamiliar with C. Is there anyone on this forum that can translate this into VB.net code, please? I am using VS 2010.[code]...

View 6 Replies

Change The Variable StrLettersGuessed Into A Single-element Array?

Jul 12, 2009

How do I Change the variable strLettersGuessed into a single-element array

View 4 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved