While I'm trying to build a solution after I've changed a little in its code it gave me an error and even when I've removed the code the same error appears.
"Unable to find manifest signing certificate in the certificate store." (That is the Error and it either stop building or run last successful build.)
I got "Unrecoverable build error" when building setup project.I try the solution in [URL].. but did not work out.
View 1 RepliesI am getting the following error when I am trying to build my website, It is an error to use a section registered asallowDefinition='MachineToApplication' beyond application level.Thiserror can be caused by a virtual directory not being configured as anapplication in IISI am using IIS express for my website and created a virtual directory and mapped in to a directory. Just found out since I have not mapped the virtual directory to an application it gives this error message. I cannot remove the virtual directory When I try to remove it from my website project.ion is do I have to do anything else to remove the virtual directory from my web site project.
View 2 RepliesI'm trying to build a web service and it should build a new XML out of an existing XML.
the code as follows:
<WebMethod(CacheDuration:=0, Description:="GroveHallFromRss")> _
Public Function GroveHallFromRss() As XmlDocument
Dim webClient As System.Net.WebClient = New System.Net.WebClient()
Dim ourUrl As String = "http://123.example.org/RSSSyndicator.aspx?type=N&range=currentyear&expire=Y&location=2-7-165&rssid=18"
[Code]...
I am trying to build an error handler for my desktop application. The code Is in the class ZipCM.ErrorManager listed below.What I am finding is that the outputted file is not giving me the correct info for the StackTrace.Here is how I am trying to use it:
Try
'... Some stuff here!
Catch ex As Exception
Dim objErr As New ZipCM.ErrorManager
[code]....
What is happenning is the .GetFileLineNumber() is getting the line number from 'objErr.Stack = New System.Diagnostics.StackTrace(True)' inside my Try..Catch block. In fact, it's the exact line number that is on. how I can catch the real line number the error is occuring on?
I am getting an "ArgumentOutOfRangeException" on parameter index whenever I try to instantiate a session factory in nHibernate. The error comes from a procedure deep in the bowels of nHibernate. This is on a fresh project with a pretty simple three tier architecture. The data layer maps the nHibernate classes to simple interfaces which are implemented by the business layer.Currently there is only one interface set and mapping file being used by nHibernate. Hopefully my issue is easy to spot.
Here is the function where I build the sessionFactory.
Private Shared Function SessionFactory() As ISessionFactory
If _sessionFactory Is Nothing Then
Dim config As New NHibernate.Cfg.Configuration
config.Configure()
[code]....
Edit2: When I remove the discriminator I no longer get this error. Am I not doing that right?
Edit 3: When I download the source code for nHibernate, build it on my own, link to it's debug output and run it, I get a completely different error about ProxyFactoryFactory not being configured.
My project from 2003VS is getting an error on build It needs to be build but I don't know whats wrong.
------ Build started: Project: MatchServer, Configuration: BRZ_Release_publish Win32 ------
Linking...
UnitTest++.vsnet2003.lib(Test.obj) : error LNK2005: "public: __thiscall std::_Lockit::_Lockit(int)" (??0_Lockit@std@@QAE@H@Z) already defined in libcpmt.lib(xlock.obj)
[code].....
The below message appears when I build a solution. How to avoid this? Please provide me a detailed answer. I am a beginner of Visual basic.
View 4 RepliesI've setup an ItemTeplate like so in a GridView:
<asp:TemplateField HeaderText="Building">
<ItemTemplate>
<asp:Label
[Code].....
I'm receiving the error:
EntitySet 'Building' that was specified in page markup does not exist on the Container.
There is definitely a Building entity in the pbu_housingEntities?
I designed an application to download a file from the Internet onto a selected location on the local computer. This application too, has a form-building error.Debug Error Message: An error occurred creating the form. See Exception.InnerException for details. The error is: Object reference not set to an instance of an object.
[Code]...
Unable to write to output file 'D:DevelopmentJob_TrackerJob_List_and_TrackerobjDebugJob_List_and_Tracker.exe': The process cannot access the file because it is being used by another process. Job_List_and_Tracker
View 6 RepliesI began setting up a TeamCity server a couple days ago for use in automated testing and CI. We mainly do VB.net web apps and up until now, it had been checking out things and building just fine.
A problem came up when I tried to add actual deployment into the mix. I saw this article: [URL]
referenced all over the place as a good guide, so I followed the steps relating to setting up a Web Deployment project and rigging TeamCity to run it. Basically, it recommends setting up a new build configuration in VS2010 called "Deployment" which builds the Web Deployment project, then creating a build configuration in TC that targets it.
The issue is that the web deployment project won't compile when run under TeamCity. The regular build works just fine, but if I set MSBuild to use the build configuration that includes the Web Deployment project, it crashes halfway through and gives an error about attempting to load the System.Data.OracleClient assembly in an incorrect format. I assume this means a 32-bit/64-bit error, especially since my development machine is a 32-bit box, and the build server is 64, but I don't know why this is happening, especially when the regular build works, and nothing in my project involves using an Oracle database.
I saw in the log that there's a warning about missing reference assemblies for the 4.0 framework, so I headed off to the MS website and downloaded the SDK, but that didn't change anything. At this point, I'm stuck, and I didn't see anything already here on Stack Overflow that looked quite like this. I'll attach the log below. Have I missed something simple?
[10:46:05]: Project "MyTools.sln.teamcity.patch.tcprojx" (TeamCity_Generated_Build target(s)):
[10:46:05]: [Project "MyTools.sln.teamcity.patch.tcprojx" (TeamCity_Generated_Build target(s)):] Project "MyTools.sln" (Rebuild target(s)):
[CODE]...
I have a search engine that will use a webservice to search through my database to find 3 specific things. I don't even know if it will work like this, but I have a dropdown list on my main page to select Product, Feature, Description. From what the user selects, the webservice should then go to an if statement to use the correct SELECT statement and find results for the search.
Will someone help me figure out how to fix what I've written to make it work? Please don't be too critical, I don't have a lot of experience. I have also been researching SQL Injection because I have a lot of code that is vulnerable so keep that in mind when you look at my code.
I can't get the blue squiggly lines to go away that are underneath the DropdownList1.Value instances on the WebService page.
WebService:
<WebMethod()> _
Public Function GetCompletionList(ByVal prefixText As String, ByVal count As Integer) As String()
Dim Feature As String = DropDownList1.Value
Dim Description As String = DropDownList1.Value
Dim Product As String = DropDownList1.Value
[CODE]..........................
Default.aspx page - Here I need the dropdownlist to tie to the database somehow.
<asp:ScriptManager ID="ScriptManager1" runat="server">
<Services>
[CODE]........................
I was looking at making a program which can then build other seperate .exes, is this possible? For example the user types their mail username/password into my program then this builds a seperate one which just connects to their mail with their username/password.
View 2 RepliesI am doing a project on the CRM application which sending and receiving sms using the vb.net language. I am no where to conclusions of my project because I could not build the application. I have found many examples but the problem some of the examples some uses the sms gateway or the AT commands. I could not differentiate which one to use? I have a dateline to finish this project of mine.Most of the example does not look like a CRM application.
View 2 RepliesI have a little bit of trouble figuring out why I am getting these error messages. Here is the error messages and then the code will follow behind it.The code is taken directly out of the book "ASP.NET 2.0 Everyday Applications for DUMMIES". [code]
View 6 RepliesWanting to know the best method to use if building a small app that will intereact with the web using usernames and passwords, captcha's etc.....
I'm thinking Window's Form but can you use captcha's in a windows form?
relatively new at using Visual Basic, and I'm trying to make a decathlon calculator. My question is how do I make a blank array, and after each person is done calculating their decathlon score it adds the persons name, school,(which are both in text boxes) and score(which is calculated into a textbox) to the blank array
View 4 RepliesI am trying to write simple database application and try to understand ADO.net as well.say I have 2 table
1. table emp with the following field (empId, empName, empPhone, salary, deptId)
2. table dept with the following field (deptId, deptName, deptLocation, deptManager)
emp table is link to dept table via deptId.so I try to build a form with 2 data grids the top will be dept data grid and below it is emp data grid.I try to do this with out using the wizard so I know the flow and understand how to link together step by step.
in the form load section:
dim conn as new system.data.sqlclient.sqlconnection(connectionString)
dim daEmp as system.data.sqlclient.sqldataadapter
dim daDept as system.data.sqlclient.sqldataadapter
[code]....
I am kind of stuck on what to do next, I think the next step is to creat dataview from my understanding before mapping it to the datagrid, but on data grid documentation it say it can only filter datarow, it can't filter data column on the dataview.
I would like to be able to display deptName, deptLocation, no the whole column on the table to data grid, and when user select a record from dept datagrid then the employee info (empname, empphone, empsalary) is display on the second grid (again not the whole emp column table).
the user can update, add or delete emp record from employee data grid by clicing on update button, on update button callback routine I need to put something like.
daEmp.update()
from what my understanding then I need to create update, insert and delete routine and attach it to daEmp so the data grid know how to sync with sql server, so when the user say add new record since the data grid doesn't have all the field display, i.e deptId column is not on data grid, how the table know what the dept id would be? I'd like to learn without the wizard 1st since once I know how everything is link then it is easier to debug since the wizard create lots of file and it's everywhere which make it very hard to understand what is happening for someone new to vb & ado.
Okay Is there a way In vb.net to create an exe from a predefined script, for example rather than writting the methods and subs into the codedom code could I just have a textbox that I could put a script into and then have that built? (obviously omitting button presses and things.)
Im not worrying about ui's at the moment just and exe (hello world style )
Are there any tutorials for this?
Code: None
Possible Duplicate:Building F# library to be used in C#
Let's say I have the following function.
let rec fib n =
match n with
[code].....
building webpages is it possible with vb
View 2 RepliesI'm interested in building a GUI CAD software in VB.NET, but I don't know from where to begin. I've looked in Audesks online help but there are no instructions, neither tutorials on the net for building something like this. When I'm saying GUI, I mean a work area, where you can use blocks from autocad and build a plan/circuit/PCB or other stuff like this.I'll be glad to see is this possible, and what kind of components can be used.
View 3 RepliesI have a problem with building a project. When I build a project and when I create .exe file, I cannot run it on other computers.There is an error: "The application failed to initialize properly (0x0000135). Click OK to terminate the application.".ca i have any chance to solve this error without installing framework 3.5
View 2 RepliesI am building a module using linq to SQL and I am running into some problems. I have been following Michal Washington's tutorial on [URL]. The problem is that VB does not recognize my Complaint Class when I try to create new Complaint object. why I am unable to Dim a Complaint object? Here is my code:
[Code]...
I have a problem with building a project. When I build a project and when I create .exe file, I cannot run it on other computers. There is an error: "The application failed to initialize properly (0x0000135). Click OK to terminate the application.". When I install .NET framework on the computer, than there is no this error. Is there any chance to create a file that will run on the other computers without installing the .NET framework?
View 8 RepliesI am working on a program. I created a database and used it to create a dataGridView in my program. I clicked the table adapter for the program and tried to create a new query. When I did this, I got the following error messages...Error message-the new command text returns data with schema different from schema of the main query check your query's command text if this is not desired Schema returned by the new query differs from the base query I cannot create a query for the database. What is a base query and what can I do to fix this?
View 7 RepliesI am successfully building an array list as shown below:
Dim obj1 As paperCutObj = New paperCutObj
obj1.Model = readLine(0)
obj1.IPaddress = readLine(1)
[code]....
I am building a autocomplete on my textbox. Really simple and it works really fine. But I like to do the next thing. When there is a match in the list and I will click on it. then i like to have a function.
For example
Private Sub ListItems_click(ByVal sender As Object, ByVal e As System.EventArgs)
MsgBox("test")
End Sub
How can i make this sub??
I am trying to learn building an Extender Provider.I use VB 2008 express.I found an example in a book which adds an "ExtraTag" property to Labels and TextBoxes:
Imports System.ComponentModel
Imports System.Drawing
Imports System.Windows.Forms
[code]....