I am debugging a VB.NET forms program which calls into properties and methods of a class which is part of the same project. I put a break point in the form code but when I step through, it does not step into the class code.
View 2 RepliesI'm trying to understand how this code work step by step but I'm confusing How the code work when executed from first step to last step?example: when I set obj to age = 39 . is the first step is checked if the variable in m_Age or checked in Property Age
vb
Dim obj As New Minimal obj.Age = 39 MsgBox("after setting the age to 39, age is " & obj.Age.ToString)
vb
Public Class MinimalPrivate m_Age As Integer Property Age() As Integer Get Age = m_Age End Get
[code]....
When I started to work on this new project in vb.net 2010, I put many breakpoints to try to understand the execution order of the project, only to find it in vain. Step into command F11 should work correctly according to Visual Studio 2010: Step Into Property/Function(F11) doesn't work as expected. But I when I pressed F11, I found the code is jumping from one place to another based on breakpoints, not line by line or step by step.To give an example, please see the code below
Me.tcData.Alignment = TabStrip.TabControl.TabAlignment.Bottom 'line 1-breakpoint
Me.tcData.Dock = System.Windows.Forms.DockStyle.Fill 'line 2
...
Me.tcData.TabsDirection = TabStrip.TabControl.FlowDirection.LeftToRight 'line 3
[code]....
When I press F11 at line 1, it goes to the property 1. After it returns, when I press F11,it goes to property 3 directly, without accessing the code in line 2 and line 3.I do not understand why the code is NOT executed step by step by using F11. If I put breakpoingts in line 2, then line 2 is executed.So it seems to me that the showed execution order is based on breakpoints! So if I put breakpoints at different places, the showed execution order would be different! Thus, it is impossible for me to really understand the execution order.
this is my code:
Dim WB As WebBrowser
WB = GetPage("http://speed.travian.ir/a2b.php?z=" + VillageID.ToString + "&c=" + Type.ToString + "&" + AttackParams)
[code].....
I am running Microsoft Visual Studio 2008 Professional on a Windows 7 system. While working on the visual basic exercise in chapter 4 of the Microsoft Visual Basic 2008 Step by Step book on the MyMenu program I added a Toolstrip to my form and then I was trying to perform the add OpenFileDialog and ColorDialog controls to the component tray as described at the bottom of page 111 under Using Dialog Box Controls. I could never get the controls to appear in the component tray as instructed in the book.
[Code]...
I have just re-installed VS 2005 on my machine. Now when I want to step through my source in Debug My F8 key doesn't work. I did manage to get an icon on the toolbar that I can click to do it but How do I associate the F8 Function key back to that process?
View 4 RepliesSuppose a dll file is referenced by a project. To step into the dll code, I added the corresponding project to the solution.But I found the program still can not go to the internal code of that dll project.
View 4 RepliesSuppose a dll file is referenced by a project. To step into the dll code, I added the corresponding project to the solution.But I found the program still can not go to the internal code of that dll project.
View 4 RepliesI have a program that plays a video and uses the step function to move frame by frame backwards and forwards through the video. The forward frame works just fine:
AxWindowsMediaPlayer1.Ctlcontrols.step(1)
However, the backwards step (below) jumps a full second backwards while the forwards step only steps .033 seconds forward (presumably a single frame).
AxWindowsMediaPlayer1.Ctlcontrols.step(-1)
I can't find any documentation about this problem online and in fact I can't find much mention of this function.the documentation does say the -1 command should step back one frame. IWMPControls2::step method Is this a known bug or is there an updated function I should be using?
I really need to learn much about it, but always stock up,.DOTNET covers the vb.net, C#, C++, ASP.NET, .NET framework is it right?.C++? ASP.NET?What should be my step by step procedure?
Will I start on database? Connection of client and server? Webrowser? Application?...etc etc etc.Will it ok if i start on studying every toolbox item one by one?
I dont have any project or every assignment that needs to be done....All i want is to learn about DOTNET
coming to the topic i want to learn dotnet i am not good at programming. but i want learn it i m very passionate about it.you all know soo much about DOTNET even i want to become like you people.i have a bit knowledge about this but not much..What should be my first step towards this?How should i start with and from where should i start with?
View 3 RepliesMy need is to work with what I have (2005 studio), what I know (Visual Basic) but need a primer. I am a visual learner (so I need to see [1] how the form is created, named and set up). From there I need to see [2] how he code works so that I can implement from there.
View 2 Replieswrite SubSonic 3 Step By Step WinForm App VB.Net: Installation,Setup And Generating.
View 2 RepliesIn my project, a reference xxx.dll is added. I am going to step into the code inside xxx.dll, therefore I add the project into the existing solution.So far so good for the vb.net xxx.dll file.Suppose another COM Interop.yyy.dll will be added, is there anyway to step into the yyy.dlll internal code?
View 1 RepliesA problem has started recently - I'm developing an ASP.NET application and when I click 'Start Debugging', it builds and opens a web page, but not where I can set breakpoints or step through the code. From within Visual Studio, it looks as if it's not running after the web page opens.
If I restart the computer, it works the first time or 2, but after a while it starts doing that again. Also, I'm using RDP to access my work computer to do my work. I'm not sure if that has anything to do with it, because I didn't notice this happening the last time I went to the office.
I have a wizard where users need to fill out data. You cannot navigate to the second step until first step is completed.
I enforced this behavior by disabling/enabling "Next" button, but I really do not like this solution, since it seems not really elegant or safe here. What is the good approach on building step-by-step processes with enforcing step completion.
Private Sub CMDreturngame_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CMDreturngame.Click
Dim gameID As Integer
[CODE]...
The above is my code. I'm trying to get it to step into the bolded code when I click on no in the messagebox, but it keeps skipping. No idea why as I've wrote another piece of code with similar coding, which works perfectly fine.
I seem to lost the practice files disk for this book, and I am trying to 're-learn' this book. I am unable to do the lessons without the practice files. If you have the disk and could maybe zip them up and email them to me? I have the other disks still, and am using the Visual Studio Express to do this.
View 2 RepliesIs this the correct forum for questions regarding code in the Visual Basic 2008 Step By Step? If so I would like to know why there is a declaration for one PictureBox and not the other. If there is a better forum for Michael Halvorson's book, can anyone direct me there?
View 11 Repliesi would like to ask for little help in here. I developing application for wake on lan and i have group of checkboxes button and i sub with threads. My problem is in button event i would like to run sub only if checkboxes are checked. All works but problem is when i have this rutines in button action then it start threading all the same time. Its very hard to explain. Bassicaly i wanna read this if checkboxes systematicly 1 by 1 from top to down coz right now in my multitexbox(status) they are all mixed and i can't recognize what belong to what.
[Code]...
I'm trying to understand how this code work step by step but I'm confusing How the code work when excuted from first step to last step? example: when I set obj to age = 39 . is the first step is checked if the variable in m_Age or checked in Property Age
vb Dim obj As New Minimalobj.Age = 39 MsgBox("after setting the age to 39, age is " & obj.Age.ToString)
[Code]...
I just had to do a complete reinstall of my development machine (reinstalling VS 2005 & SQL Server 2005). I finally am able to run my projects in VS. I can set breakpoints, however, when I come upon a breakpoint, the IDE won't let me "step" thru each line of code. What am I missing?
View 14 RepliesI need to create unit testing project for my current website. The currentw ebsite si written in VB. All unit testing examples are using interface to create mock object. My current VB class does not implment any interface. Can I add interface and implement it to my current class and functions without affecting or changing codes to any pages in my website that call the functions? For examples my current class is like:
[Code]...
my proble is the following: I have a class MyClass and another class Modifier, which has a method ModifyMyClass(ByRef mc as MyClass) that receives a MyClass instance as ByRef parameter to modify it. A smell of the code is:
[Code]...
I have a very simple class that is located within my App_Code folder in my VS2008 web application project. I am trying to instantiate an instance of this class from my code-behind file. Intellisense does not seem to be seeing my class and I am not sure why. I am using VB.NET which I am admittedly not that familiar with as compared to C#. Perhaps I am missing something. I would bet it has something to do with something I am missing in VB.NET.Here is my simple class (for testing):
[Code]...
I recently found this code (provided for third party use on another VB site), however,ll of my attempts to insert it into a class library have failed.I open a new class library and past the code in, and immediately get several errors pertaining to how certain objects can't be found. I find it it is crucial to use this code, unless someone can suggest to me another example of existing code that will do the same thing: make a restricted textbox who imputs can be restricted, that can handle pasting, shortcuts, text property setting, and script-entered text.
Option Strict On
Imports System.ComponentModel
Public Class RestrictedTextBox
[code].....
I've been working on a project the last couple of day with the help of a lot of you out there. I've more or less finished the design of the interfase, but there are stange this happening with the form. I can say much about what is wrong because I dont understand it, but I would like to. I have added the form Class code and the Designer Code, is that enough or is more required? Theres a msgbox that popup in the form Load event which I placed there to see what I could learn about the GraphicsBuffer.
Imports System.Drawing
Imports System.Drawing.BufferedGraphics
Imports System.Drawing.BufferedGraphicsContext
[CODE]...
Im working on my project. and i just asking if i can used this Property in vb. NET [URL] when i install adobe photoshop .. i see on the leff installer...something like a menu and the menu move step by step when the user move between Forms
Welcome
Serial Number
Adobe ID
Install
Finish
How i can create like this in VB .NET
I created a VB.NET Class, and created a strong key, and added it to the GAC using the GacUtil. That part has gone smoothly. The Assembly is installed in the GAC and seems to be installed/configured correctly.FYI, the assembly is a Class called Tester, that exposes one public static method called HelloWorld, which returns a string, "Hello World".The next step was to create a test web application (VB.NET and ASP.NET 2.0), using Visual Studio 2005, Windows XP SP3. I created the test web application and added the following to the web.config file's configuration section.
<assemblies>
<add assembly="BenGACTest, Version=1.0.0.0, Culture=neutral, PublicKeyToken=3e5b6cecb56999ca" />
</assemblies>
I then added some inline code to my aspx page as follows:
<div><%=BenGACTest.Tester.HelloWorld()%></div>
When I run the page in the web browser, indeed everything works as expected. The page outputs "Hello World" and all seems goodHowever, I don't know how to use this code in the code-behind page.I try to import the assembly, just like "imports system" and it doesn't appear in the IntelliSense.Also, when I try to add the assembly as a reference to the project, the assembly is not found in the list of installed assemblies. I believe this is because the list is pulled from the registry, not from a dynamic list of installed assemblies.My goal is to add the assembly via the web.config file, not by adding it as a project reference, and to use the assembly in the code-behind page.
I understand that we can set the various style attributes from code behind using :
divControl.Style("height") = "200px"
But how to set it's class instead of declaring each of the styles from code?