Suppose a dll file is referenced by a project. To step into the dll code, I added the corresponding project to the solution.But I found the program still can not go to the internal code of that dll project.
I'm trying to understand how this code work step by step but I'm confusing How the code work when executed from first step to last step?example: when I set obj to age = 39 . is the first step is checked if the variable in m_Age or checked in Property Age
vb Dim obj As New Minimal obj.Age = 39 MsgBox("after setting the age to 39, age is " & obj.Age.ToString) vb Public Class MinimalPrivate m_Age As Integer Property Age() As Integer Get Age = m_Age End Get
When I started to work on this new project in vb.net 2010, I put many breakpoints to try to understand the execution order of the project, only to find it in vain. Step into command F11 should work correctly according to Visual Studio 2010: Step Into Property/Function(F11) doesn't work as expected. But I when I pressed F11, I found the code is jumping from one place to another based on breakpoints, not line by line or step by step.To give an example, please see the code below
When I press F11 at line 1, it goes to the property 1. After it returns, when I press F11,it goes to property 3 directly, without accessing the code in line 2 and line 3.I do not understand why the code is NOT executed step by step by using F11. If I put breakpoingts in line 2, then line 2 is executed.So it seems to me that the showed execution order is based on breakpoints! So if I put breakpoints at different places, the showed execution order would be different! Thus, it is impossible for me to really understand the execution order.
I am running Microsoft Visual Studio 2008 Professional on a Windows 7 system. While working on the visual basic exercise in chapter 4 of the Microsoft Visual Basic 2008 Step by Step book on the MyMenu program I added a Toolstrip to my form and then I was trying to perform the add OpenFileDialog and ColorDialog controls to the component tray as described at the bottom of page 111 under Using Dialog Box Controls. I could never get the controls to appear in the component tray as instructed in the book.
I am debugging a VB.NET forms program which calls into properties and methods of a class which is part of the same project. I put a break point in the form code but when I step through, it does not step into the class code.
I have just re-installed VS 2005 on my machine. Now when I want to step through my source in Debug My F8 key doesn't work. I did manage to get an icon on the toolbar that I can click to do it but How do I associate the F8 Function key back to that process?
Suppose a dll file is referenced by a project. To step into the dll code, I added the corresponding project to the solution.But I found the program still can not go to the internal code of that dll project.
I have a program that plays a video and uses the step function to move frame by frame backwards and forwards through the video. The forward frame works just fine:
AxWindowsMediaPlayer1.Ctlcontrols.step(1)
However, the backwards step (below) jumps a full second backwards while the forwards step only steps .033 seconds forward (presumably a single frame).
AxWindowsMediaPlayer1.Ctlcontrols.step(-1)
I can't find any documentation about this problem online and in fact I can't find much mention of this function.the documentation does say the -1 command should step back one frame. IWMPControls2::step method Is this a known bug or is there an updated function I should be using?
I really need to learn much about it, but always stock up,.DOTNET covers the vb.net, C#, C++, ASP.NET, .NET framework is it right?.C++? ASP.NET?What should be my step by step procedure?
Will I start on database? Connection of client and server? Webrowser? Application?...etc etc etc.Will it ok if i start on studying every toolbox item one by one?
I dont have any project or every assignment that needs to be done....All i want is to learn about DOTNET
coming to the topic i want to learn dotnet i am not good at programming. but i want learn it i m very passionate about it.you all know soo much about DOTNET even i want to become like you people.i have a bit knowledge about this but not much..What should be my first step towards this?How should i start with and from where should i start with?
My need is to work with what I have (2005 studio), what I know (Visual Basic) but need a primer. I am a visual learner (so I need to see [1] how the form is created, named and set up). From there I need to see [2] how he code works so that I can implement from there.
In my project, a reference xxx.dll is added. I am going to step into the code inside xxx.dll, therefore I add the project into the existing solution.So far so good for the vb.net xxx.dll file.Suppose another COM Interop.yyy.dll will be added, is there anyway to step into the yyy.dlll internal code?
A problem has started recently - I'm developing an ASP.NET application and when I click 'Start Debugging', it builds and opens a web page, but not where I can set breakpoints or step through the code. From within Visual Studio, it looks as if it's not running after the web page opens.
If I restart the computer, it works the first time or 2, but after a while it starts doing that again. Also, I'm using RDP to access my work computer to do my work. I'm not sure if that has anything to do with it, because I didn't notice this happening the last time I went to the office.
I have a wizard where users need to fill out data. You cannot navigate to the second step until first step is completed.
I enforced this behavior by disabling/enabling "Next" button, but I really do not like this solution, since it seems not really elegant or safe here. What is the good approach on building step-by-step processes with enforcing step completion.
Private Sub CMDreturngame_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles CMDreturngame.Click Dim gameID As Integer
[CODE]...
The above is my code. I'm trying to get it to step into the bolded code when I click on no in the messagebox, but it keeps skipping. No idea why as I've wrote another piece of code with similar coding, which works perfectly fine.
I seem to lost the practice files disk for this book, and I am trying to 're-learn' this book. I am unable to do the lessons without the practice files. If you have the disk and could maybe zip them up and email them to me? I have the other disks still, and am using the Visual Studio Express to do this.
Is this the correct forum for questions regarding code in the Visual Basic 2008 Step By Step? If so I would like to know why there is a declaration for one PictureBox and not the other. If there is a better forum for Michael Halvorson's book, can anyone direct me there?
i would like to ask for little help in here. I developing application for wake on lan and i have group of checkboxes button and i sub with threads. My problem is in button event i would like to run sub only if checkboxes are checked. All works but problem is when i have this rutines in button action then it start threading all the same time. Its very hard to explain. Bassicaly i wanna read this if checkboxes systematicly 1 by 1 from top to down coz right now in my multitexbox(status) they are all mixed and i can't recognize what belong to what.
I'm trying to understand how this code work step by step but I'm confusing How the code work when excuted from first step to last step? example: when I set obj to age = 39 . is the first step is checked if the variable in m_Age or checked in Property Age
vb Dim obj As New Minimalobj.Age = 39 MsgBox("after setting the age to 39, age is " & obj.Age.ToString)
I just had to do a complete reinstall of my development machine (reinstalling VS 2005 & SQL Server 2005). I finally am able to run my projects in VS. I can set breakpoints, however, when I come upon a breakpoint, the IDE won't let me "step" thru each line of code. What am I missing?
While I reading a sample I found this code which I could not Find its functionPrivate Sub LoadList(ByVal lst As ListBox, ByVal typ As Type)lst.DataSource = System.Enum.GetNames(typ)End Sub Actually I understood that This code create a method to do some thing as I think to list some thing but what is DataSource and what isSystem.Enum.GetNames(typ) and I never created a method before with (ByVal 1st As ListBox, ByVal typ As Type)
I want a textbox to be checked for specific characters. I can use: with textbox1.text If .contains("a") or .contains("b") or .contains("c")...etc... then...
I have a project with requirements to generate a single executable file with no dependencies that will automate the submission of data to a WCF service based on command line parameters passed to it. As a result, I cannot configure the WCF binding and quotas in an App.config file, so I am generating a BasicHttpBinding in code to use when dimensioning the WCF client object.
However, the WCF service accepts the binary data for a relatively small Excel spreadsheet that ends up being around 30kb, so the default configuration settings for the binding's ReaderQuotas are inadequate. My attempts to increase them in code to 1MB, however, have met with failure each time I make a call to the service.[code]...
i am in a middle of a crucial job and i needed to add a printing code that will be able to print records in a database. what do i do, someone should please help. your assistance is highly welcomed
I am having an issue getting my code to work. It is not showing my Look-Up Button for me to calculate the rate based on the weight and zone and it continues to constantly show that I have an error that I cannot seem to correct.
Im working on my project. and i just asking if i can used this Property in vb. NET [URL] when i install adobe photoshop .. i see on the leff installer...something like a menu and the menu move step by step when the user move between Forms
I've tried to incorporate this code in my app and can't figure out what the missing link is? Lotsa experimenting and head scratching later, I'm coming here to the forum for help. The dialog opens and allows me to select the file saved earlier,except the file doesn't open. I can't figure out the missing code which goes at the comment "insert code to read stream here." The code:
[code]...
does it have something to do with StreamReader.IO ?