IDE :: "Edit Dataset With Designer" Window Hangs In VS 2008?
Sep 29, 2010
Editing a Visual Studio 2008 solution (1 Windows project and 1 installer project) that has been working flawlessly.Recently, attempts to edit the Dataset (add/modify queries) by right-clicking the dataset and selecting "Edit Dataset With Designer" brings up the MyProject_Dataset.xsd window TAB, and initially displays "Please wait while loading..." in the middle of the window -- and then does nothing else.Alt-Tabbing to other apps then leaves "ghost window" stuff displayed where "Please wait while loading" once was... and editing queries, etc., is impossible.Shutting down Visual Studio will enable me to successfully get into the editor once ot twice, but then it locks up again.
View 6 Replies
ADVERTISEMENT
Nov 10, 2010
When using the Dataset Designer in VS 2010 I add a new query.It adds with no issue.Add another,starts to hang. Add another and now it can hang for hours.I use task manager to kill VS 2010 after 30 minutes.Go back into the same table adapter query, modify it, save it.Works in seconds.Add another query, hangs, hangs, hangs.I have seen posts about this going back to VS 2008.I have No Add-Ons loaded, what is causing this issue??
View 2 Replies
Jan 27, 2011
I am attempting to update an existing winforms application, that was created with a dataset control on all the winforms pages. I have ported it from VS 2008 to VS 2010 and I need to update the database section and connect it to the SQL backend using traditional code method.In the Solution explorer, when I click on the Dataset files, and click "Exclude From project" I am unable to build the project.Is it advisable to comment out the code lines that refer to the dataset in the .designer.vb files?
View 1 Replies
Jul 8, 2011
I would like to know where the dataset designer is obtained for a vb.net 2008 appliocation I need to work on. Is this part of the initial install for visual studio.net 2008. If so, what part of the initial install will I find the dataset designer? Is this a plugin that needs to be downloaded? if so, what URL do I need to use to obtain the plugin?
[Code]...
View 2 Replies
Apr 16, 2009
Ok i have an issue that i have reported before but never had a satisfactory result to so time to try again. and im just about ready to throw this whole visual studio nonsense in the trash, ive wasted god knows how many hours on this now. I have a medium sized VB.net (2008) project, which has around 50 Datatable adapters that i have setup in the dataset designer, and are all workign perfectly well.
[Code]...
View 1 Replies
May 27, 2009
In VB6 IDE if you doubleclick on the titlebar of the form designer, it maximizes/restores. But in VB.net it opens up code window.How do you quickly maximize/restore the form designer window ?
View 4 Replies
Mar 21, 2010
How to perform add, edit, delete in a dataset that will update the database as well?
View 1 Replies
Mar 15, 2010
When the user clicks an "Edit" button on my form, I want a box to come up which allows the user to edit a DataTable in a strongly-typed DataSet. What's the best way to do this?
View 2 Replies
Feb 10, 2011
Following is the code I used to call the child window:
Dim c As New New_Contact()
c.Title = "New Contact Details"
AddHandler c.Closed, AddressOf NewContactClosed
[code].....
View 2 Replies
Jul 1, 2011
In VS2010, targeting Framework 4.0, I have a UserControl which contains a TableLayoutPanel with an empty second row.Is it possible to add items to this second row using the Windows Forms Designer, or do I have to do it all via code?
EDIT: In reply to Hans Passant's comment, the linked question references a UserControl being used inside another control.I am asking a question about inherited controls.I have created the following test code, where TestControl is a UserControl containing a TableLayoutPanel named "TableLayoutPanel1":
Imports System.ComponentModel
Imports System.Windows.Forms.Design
<Designer(GetType(testDesigner))>[code]....
creates a control which, when viewed in the designer, contained a TableLayoutPanel named "TableLayoutPanel1" which is not designer-editable.Creating a new UserControl, not inheriting from either of the previous UserControls, and then placing a TestControl into it creates an instance of TestControl with a Designer-editable TableLayoutPanel named "TestControl1.TableLayoutPanelX".Is there any way to make the TestInheritedControl class, shown above, Designer-editable?
View 1 Replies
Oct 21, 2009
It seems that there is no way to preserve changes to a DataSet made with the Designer when there is a change to the database. The only way to get the Designer to rescan the database to incorporate a change is to delete the DataSet and then recreate it. This of course blows away all the mods you've made in the designer. There should be a way to have the Designer rescan the database while preserve all the mods that have been made in the Designer. Otherwise the Designer is essentially useless after the initial generation of code. What am I missing?
As a workaround, I tried incorporating the changes to the database by making the same change in the Designer rather than recreating. However, clearly no one tested this is it only partially regenerates the code based on the change. Try changing a field from nulls not allowed to allowed. This works when you add data to the DataTable, but bombs as soon as you update the database, because the DataSet code does and the database code doesn't get regenerated.
View 8 Replies
Jan 10, 2012
I have a windows form application made in Visual Studio 2010 SP1 Rel. I'm using SQL Server 2008 R2 for my database. I've been working on this project for a while now and I am almost completed with it. I recently had to add a field to one of my tables in my database, which hasn't given me much troubles in the past as I've had to do this before. To make sure I did it properly, I'll tell you how I added the field. I went to my database on my server and went to my table, tblOrderParts. I right clicked, and went to design. I added a field, Order_Delete, which I made a bit field so I could use a checkbox. When I went to my dataset designer, I used the wizard to add the field to the table in my program.
After I added it, I remembered that one of my forms was using a view I had created with that table that would need the checkbox as well, so I went back into SQL Sever to add that. Added in SQL with no problem, but when I went back to Visual Studio's dataset designer to add the field to my view, it won't allow me. I open the wizard, go to my view i created, vwAllOrders, and checked the box next to it. When I press Finish, though, I get, "An exception has occurred while attempting to set the data source generator property." I had to cancel out of the dataset wizard cause it wouldn't let me continue... even if nothing was changed.
Now it is also showing me an error in the Error section saying,
"Custom tool error: Failed to generate code. Exception of type 'System.OutOfMemory' was thrown."
Now that I've said the error, here's what I'm thinking is going on... Something must be wrong with the custom tool on my dataset. The tool name is MSDataSetGenerator. I went on more forums, and a couple mentioned trying to restart the custom tool by right clicking the dataset and going to "Run custom tool.' When I run it, it gives me another error. Not much different, but still different in wording.
The error it pops up say
"The custom tool 'MSDataGenerator' failed. Exception of type 'System.OutOfMemory' was thrown."
View 2 Replies
Jul 4, 2010
However, now when I open it in design view and add a new tableadapter I now cannot reference the new objects from the code. Likewise if I delete one of the existing tables in the dataset, it still appears to be there from the code (ie in intellisense)Similarly, when I examine the .xsd file, the changes I've made i the designer appear, but the changes are NOT happening in the dataset.designer.vb file. It's as if the two files are somehow out of sync
View 3 Replies
May 22, 2010
VB.Net 2010 Express - AMD Phenom II X4 - 8g ram There are times when I debug the app that I get the 'End Sub' must preceded by a matching 'Sub' error. This usually happens after I make a change to the table adapter query in the dataset using the designer.
If I dblclick on the error it opens the dataset.Designer.vb and shows the error in question.
First, I have made NO changes to this file manually Second, when looking at the code in question, it actually appears there is nothing wrong with it - yet the compiler thinks there is.
This appears to be a VB.Net 2010 IDE/compiler bug Now, I can resolve this error by re-opening the dataset, configure the Fill query, click Finish (not making any changes - just clicking Finish), and then save and close the dataset.The error goes away then, but I shouldent have to go through all that; especially since my query was fine to begin with.
View 2 Replies
Sep 22, 2009
in my VB.Net application I've created a Dataset that call an existing MS SQL Server stored procedure but after the wizard close no columns where added... how can I add all the columns returned by the stored procedure without adding them manually (off course the stored procedure might change in the future) in which case manually will not work.
View 1 Replies
Apr 17, 2009
I have a dataset with around 15 table adapters. Everytime I make a change, such as add a column, change a type, or just anything, it takes around 3-4 minutes before studio responds again. The processor and ram are in good shape, but there is a spike in network usage by devenv during this time. In fact, devenv has the higheset network usage all together, even with with IE open and browsing. Why would this be and is there any remedy?[code]...
View 3 Replies
Feb 24, 2011
The DataSet designer will stop refreshing itself every now and then in VS2008. This means I cannot work with my DataSets until I restart VS. There is a more detailed explanations in
this thread, but it was incorrectly marked as answered. This issue is taking more and more of my time though, so I'd like to get another answer now.
View 1 Replies
Jul 22, 2010
I've got several pretty massive dataset's with a lot of tables/relations in each.I've came in this morning and one of the datasets has sorted itself into a very readable Vertical form with all relations and tables displaying perfectly readable.Is there a command to "Arrange" the layout of the tables?
View 4 Replies
Sep 16, 2009
I open the Playtime Solution file and clear the start window, I only get a gray background and no designer tab. I've tried every way i know how to open the designer window from the solution explorer window:
Right click>>View designer
No designer tab available
View Menu>>View Designer
Shft+F7 while highlighted
I've done 3 fresh re-installs of Microsoft's VB Express Edition 2008 and the same issue is appears every time. Also, I'm running Vista, but it works fine on my other Vista computers. How do i fix this?
View 5 Replies
Mar 13, 2010
When i try to open a designer window of a project in vb dotnet an error occurs, Could not find editor for this vb.Why this error shows. But i can open code window.
View 12 Replies
Nov 2, 2010
I've made a HTML editor application which includes some features found in Microsoft FrontPage(and Microsoft Expression Web).The only thing is that I now want to add a Designer Window like that in FrontPage(or Expression Web) where users can produce HTML pages dynamically.I do have a Code Window but need a Designer Window.My Code Window includes all features syntax highlighting capability, IntelliSense(like), etc
View 1 Replies
Jun 1, 2010
I'm using VS2008 and SQL CE 3.5, building a smart client app. When I add a table adapter with this code:
UPDATE feeders
ET planningAreaID = @areaID
WHERE feeders.transformerID IN
[code].....
View 5 Replies
Nov 19, 2008
I have a typed dataset with table adapters. I use this method because it makes it easier to design the layout of my DataGridView.The problem is I have added a new table to my dataset. When I go to the "Data Sources" list view, I can see the new table.However, if I add a new DataGridView to my form then attempt to bind it to my new data table, the table will not show up in the list of tables for that dataset.
View 1 Replies
Nov 8, 2009
I have written this code implemeting MVC design pattern.... for simplcity... i have create Model with BLL having a two classes Employee and Designation and i have created the DAL using the Dataset designer tool....thus i've implemted all relationship bewteen the two tables Empoyee and Designation connected to each toher using field EmpIndex.
In MVC design pattern i should return objects to the controller (in this case i used only the view- win form) becuase of my Designer created DAL i cannot return objects of Employee and Designation to the View... this is becuase in BLL: the following method
Code: public TestMVCWithDataset.TestDataSet.tblEmployeesDataTable SearchByIndex(int iEmpIndex) { try { empAdapter.Fill(dtEmployees, iEmpIndex); return dtEmployees; } catch { throw new Exception("Employee not found!"); } }
[code]....
View 1 Replies
Mar 22, 2009
I've included an MS Access database in my WPF VB app, and I'm trying to link the data to an XCEED Datagrid. I have the following code in my testerDataSet.Designer.vb file which I assume is the funcion I should be referencing
Public ReadOnly Property Contact() As ContactDataTable
Get
Return Me.tableContact
End Get
End Property
I'm trying to get it to fill my datagirid using this
<Grid.Resources>
<xcdg:DataGridCollectionViewSource x:Key="cvs_contacts" Source="{Binding Path=Contact, *Source={x:Static testerDataSet}*}"/>
</Grid.Resources>
[Code] .....
What I'm trying to achieve is for the datagrid to display the data in the Contact datatable.
View 1 Replies
Nov 24, 2011
Please can someone point me in the right direction? I would like to build my own code designer window similar to that of the one within the VB2010 IDE.I am not sure how to tackle this, at first I was thinking of using RichTextBox as this can accommodate the fonts and colors.
An example of what I am trying to achieve.Should be able to outline, expand and colapse based on my own tags. e.g. in the VB.Net IDE a function and end function are tags that would produce an outline
Should be able to change color of text based on characters. e.g. ' would turn green in the VB.Net ide as it is a comment Should be able to indent based on specific tags. e.g. With - End with would auto indent within the VB.Net ide
I should be able to cover the text color and indents using RichTextBox, but I am struggling with the outline expand and colapse.The purpose of the project is to build a simple interface for creating config files that use only specific tags
View 1 Replies
Dec 15, 2010
When I try to open up a form designer, all I see is code and no form! How can I open up the designer, since the code says to modify using the designer and not the code editor?[code]....
View 4 Replies
Jan 25, 2011
I have opened a VB project which was created using a previous version of VB. So, it popped up the conversion wizard and it completed the conversion to 2010.
But when I tried to view the forms (using "View Designer"), it shows the following message[code]...
View 6 Replies
Oct 17, 2011
I am devloping a custom designer (like the form designer), which can be used to design custom controls at designtime (see spoiler for screenshot).The problem is that i want to show the propertyes of the currently selected object in the propertygrid window in VS, and i can not figure out how to do that.
View 4 Replies
Sep 22, 2010
I used the query designer to create a qry from a datagrid view in vb2010 express, the idea was to work out which diver logged the most minutes in the water. here is a copy of the sql syntax:
SELECT MemberID, Name, SUM(DiveTime1) AS D1, SUM(DiveTime2) AS D2, SUM(DiveTime1 + DiveTime2) AS s1
FROM Triplog
GROUP BY MemberID, Name
ORDER BY s1 DESC
View 2 Replies
