IDE :: Sort The Event Handlers Within A Module/Form By Name?
Feb 25, 2011
Is thier a way to sort the event handlers within a module/class/form Etc? The IDE add the next event handler and the end while I would like it to put it in place. For example I have already write some event handlers for a textbox named txtEmpname and I have another text box named txtphone. they are ordered in the module in the order created.(i.e. the txtempname_Gotfocus then the lostfocus, then txtphone_gotfocus) Now when I want to add a clcik event for the txtempname the IDE put it at the end while I would like it to put it just before the txtempname_gotfocus.
Using VB 2008 Express I have a form in which a number of controls which have event handlers to monitor choices the user is making. The event handlers do work as expected, but the problem I'm having shows up when I load the form.For example, I have:
Code: Private Sub RadioButton6_CheckedChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RadioButton6.CheckedChanged MsgBox("I got checked!", MsgBoxStyle.Critical) End Sub
When I load the form in question from the main form of the program, I get the message box, even though the user hasn't actually clicked the radio box. The problem arises when I try to use a call to a function that works fine, as long as the entire form has loaded. Called prematurely, the function fails.How do I solve this so these event handlers don't trigger when the form is being loaded?
The following zipped up Visual Studio Solution on Skydrive is immediately buildable and runnable; a usercontrol on a Form. Problem? If you click on any of the Edit Buttons and move the Horizontal Scroll, the values as they change in the Label_Values are off by one when you release the slider button. I think this is a timing problem between the Paint handler and the Horizontal Scroll event handler at the very bottom of the User Control code. Sorry I didn't eliminate
Is there a way to run a module in a form using a click event? I am trying to setup a easy user interface where when a button is clicked a module will run and generate information in a table.
When I utilize AddHandler in VB to add my own method to the Click event :
AddHandler Button.Click, AddressOf myButton_Click
I see that my code executes last - after other event handlers for the Button_Click event. Is there a way to insert my event handler in front of other events so that it executes first?
I have a simple, but important question: How can I raise events of my form1 on another module/form?My form tempalte is crowded with events (50 of them contextmenustrip events)How can I place those events on another form/module to clean it up a little?
Public Class Form1 Public Event Evt1(ByVal c As c1) Public Event Evt2(ByVal c As c2)
[code]...
However, it seems to be invalid syntax, as the signature of OnEvt1OrEvt2 doesn't match that of Evt2.
Edit: The above code seems to work fine for everyone but me, but it doesn't compile for me in VS2005 SP1.The error message is something like:Error BC31029: The method 'Private Sub OnEvt1OrEvt2(c As WindowsApplication1.c1)' can not handle the event 'Public Event Evt2(c As WindowsApplication1.c2)' because the signatures do not match.
is it allowed to use more than one Sub to handle the same event ? For example , may I have 2 separate subs to handle the Load event of a form ? Will they fight each other ?I have tested it and it seems to work fine , nevertheless I thought I'd ask you . In case you wonder , there is no great deal , I just want to copy the same lines of code in more forms so I am doing it just in favor of the looking aspect .
I have a panel control on a win form, to which I dynamically add a custom control.The custom control inherits UserControls and in the New() sub, I assign the control a GUID.When a control is added to the form, a variable of type List(Of T) holds the details of where i put the control and the size of it.
Within the custom control class there is a delete method. When the method, which deletes the custom control, is run I want the details of that custom control removed.I think I need to use event handlers but I do not know how to handle these when the controls are added dynamically.
I have a problem, in Winform or mobile developing, When I newed some buttons in my code(never drew on the form), how can I add the click events to them and use it?
How do I create an event with many handlers. I use the followingo code but it failed. Am I missing something?
Protected Sub myhandler_CheckedChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles CrdCb1.CheckedChanged, CrdCb2.CheckedChanged End Sub
I was editing my code and after deleting a button from a toolstrip vs locked up and trashed the designer.vb code. Now I have all my form code but many of the control objects (e.g. buttons, listviews ..etc) have been deleted. I've re-added the control but none of the events associated with the control (e.g. _click) work. If I delete the event handler code and add a new one the paste in the code it works fine
Problem: I have a document class which contains a list of objects. These objects raise events such as SolutionExpired, DisplayExpired etc. The document needs to respond to this.
Documents can sometimes exchange objects, but a single object should never be 'part' of more than one document.
My document class contains a bunch of methods which serve as event handlers. Whenever an object enters the document, I use AddHandler to set up the events, and whenever an object is removed from the document I use RemoveHandler to undo the damage. However, there are cases where it's difficult to make sure all the steps are properly taken and I might thus end up with rogue event handlers.
I am trying to do sum custom events in a Class. My class listens for a UDP Broadcast, I want to Raise and Event when a message is received to display the message from a windows form.
Here is my code. Public Class UDP_Broadcast Public Event NewMessage(ByVal Message As String) Public Port As Integer = 2456 Public Sub Receiver_Load() Dim t As New Threading.Thread(AddressOf listen) [Code] .....
I have a form that is derived from a base class. When the form is created a behavior class is also generated that handles event management, bindings, etc...
I create a form instance(FormFoo). When the associated behavior class is created it has a method in it with a signature of: grid_EventA(....) Handles grid.eventA
I want to handle EventA in FormFoo instead of the behavior class so I remove the handler that was generated in the behavior class and add a handler that points to a method in FormFoo. This all works just peachy. The event is properly handled in FormFoo only.
Next I instantiate a modal form(FormBar) via a button click in FormFoo. I then close FormBar. Now we have a problem.
When eventA fires it is now handled from the Event handler in FormFoo AND in the behavior class associated with form foo(bad).
Is the event handler in the behavior class(grid_EventA(....) Handles grid.eventA) getting resubscribed when the form gets focus again? I don't understand how that event is getting resubscribed.
Alright my goal is to test to see if the user has dragged a label over a button. I have add event handlers for MouseMove and ButtonEnter, the trick is that i dont want the buttonEnter sub to fire unless the user is actually dragging a label.Dim dragging As Boolean = False
[Code]...
I thought would work but because the user is dragging the label the mouse never actually enters the button field. I also tried doing lbl.location = button.location... but unless the label and the buttons are the exactly the same size in exactly the same location then the event wont trigger.
I am making an interface that has a number of events defined in it. When I implement the interface in a class the events will show up. I want to force a class that implements my interface to also have to make the event handlers too. I don't care where the class raises the event, but I want them to have to define what happens once the event is raised. Is this possible and if so, how do I do it?
I've started working with the backgroundworker class to try and keep the UI responsive while I make some expensive API calls. One of the API classes (details here[msdn.microsoft.com]) has its own event handler which I am using to update a progress bar in a small form that pops up. So I'm looking to use the PublishPackage command in a bgw thread and update a progress bar on the UI thread by using the ProgressHandler method.
Visual Studio 2010 I am trying to learn Caliburn Micro. The sample project is presented in C# only (and runs OK) I have tried several on-line C# to VB converters, without success. Well the conveersion runs without error - - - but the Visual Studio editor chokes on the results. The principal problem seems to be with (what looks to me like) a Lambda. Advanced code conversions are really tough in any case, - but when you do not know C# nearly impossible.
I need to be able to trigger events when a user clicks on a radio button that is generated within an control on my page.I've added an OnSelectedIndexChanged handler to the RadioButtonList and created a function in my code behind that should handle the selection of the RadioButtonList's ListItems, but I don't know how to pass a value to that function.Here's my code:
In VB .NET, when you call RaiseEvent X(), is the function that handles the event X processed asynchronously or synchronously. I was under the impression that RaiseEvent and the processing of the event were Synchronous unless created explictly on another thread. I've been told otherwise though.
I have a problem with running code in the right order. What I am trying to do is updating a session state variable when I press a button. When I run my code it always runs the event handler for the button after my page_load function.The reason why I need to run it after page_load is that, thatI add a line to the textList. Which the loadGui() should add to a table. The table has a remove button for all lines so the loadGui() function can not be added later becuase then the event handler of the remove buttons wont work.
User press the add button which add a row in the TempResponse Session(TempResponse) gets updated loadGui() runs and includes the newly added row Sub Page_Load()
I have two forms, A and B. A shows B modally. B can exit normally, or can exit because of an exception. Therefore, I have this code in a method in A:
Dim nf as New B Try nf.ShowDialog Catch ex as Exception 'Whatever End Try
Now, B has some event handlers that handle an event that is raised when a certain value changes. I just found out that if B exits because of an exception, rather than a normal exit, the event handlers are still hooked up. To figure this out, I added a private string variable, and in the constructor of B I added a line to put a GUID.NewGuid.ToString into the variable. When I run this, I can pause in the event handlers I mentioned earlier, and look at the private variable to tell which instance of B is actually handling the event.
Under normal operations, there is only one instance of B. However, if B exits due to an exception, I find that the instance of B which died due to the exception, handles the event before the new instance of B is even created. At a slightly later date, the user presses a button that will cause the event, and, due to something hard to explain, the event gets raised six times, three each from the old, undead, instance of B, and three times from the new, visible, instance of B.
I think that the entire problem I am having is that the event handler is triggering things that cause the two instances to pinball events back and forth between the two of them in a complex recursion. My problem is how to get rid of that undead instance of B so that it stops handling the events that are raised. I tried putting nf.Dispose in the Catch handler of the above snippet, but that did nothing.
