Installing Visual Studios 2010 - Windows
Dec 23, 2011
when I try to install it, after it extracts all of the needed temp files, it throws this error, and stops there..."windows cannot find 'C:users*my username*appdatalocal empSIT19120.tmpsetup.exe' make sure you typed the name correctly and then try again."anyone know what the heck I need to do to get this fixed...nothing has changed, not even the file location of the installation files...nothing..also, I just found out, the temp file's name is changed each time I try to run the setup application...
View 2 Replies
ADVERTISEMENT
Dec 21, 2011
To send serial data from Arduino Mega 2560 to a VB.Net PGM, then the VB.NET pgm will read data then send to via FSUIPC (an Addin DLL) to ms flight simm 2004.OK that said here is the question: how can I write or phrase or construct the proper syntex needed to 1-limit the data sent,or in reading the data-limit the data read?I have enclosed the VB.NET code and the Arduino code. Please take a look. I am very new to both,but I try hard. all the code works but I get strange all most random data in VB. The FSUIPC end works OK, I can send to and receive from Ok.It's the VB pgm that gets the data wrong some of the time. say 8 out of 10 it is OK then button x will also turn on or off another check box then do what was aked. It seems that I am not clearing the receive buffer so I get a last chr sent before.I have tryed readline, readexisting,readbyte but I don't know how to phrase or construct any but the readline. I have tryed to flush the buffer in both codes but, well I am stuck. [code]
View 4 Replies
Mar 31, 2012
still working on my game, but a college classmate said that I need to use databases instead of text files...so I'm wanting to know, what databases does visual studios 2010 provide for you to use...what code line should I use to create/write to/read from a databasew, and how do/should I create a database table/refer to it??
I would love to provide code, but I'm both using my cell, and don't have access to my computer right now due to it not being accessale due to not having the ability to have it hooked up right now...got new floors and don't have it plugged in yet/set up again...
View 4 Replies
Apr 11, 2012
I'm trying to make a rs232 serial data logging program, that accepts a 12 bit hex RFID tagID from an RFID module. My end objective is to save this RFID tagID into a database and assigned to a person for a personnel management system.I had to use button3 to add the value of the variable 'msg' into textbox1 because I was getting the following error "Cross-thread operation not valid: Control 'TextBox1' accessed from a thread other than the thread it was created on". It is a temporary workaround.When I do press button3, I get the incomplete hex number, instead of "4C00A2C82A0C", I get "A2C82A0C", and sometimes I get random digits like 1,A,C etc etc.
Public Sub OpenPort()
Try
If SerialPort1.IsOpen Then
SerialPort1.Close()
[code]....
View 4 Replies
Oct 4, 2011
We are installing our application on windows 7. The application utlizes a Acces database. The application locates the database by looking in the registry under at HKEY_LOCAL_MACHINE / SOFTWARE / WOW6432NODE / COMPANY NAME / SOFTWARE NAME /STARTUP. When i install the application on windows 7 it places the a database where installshield directs it to and writes the path to the registry. However, somehow local copies of the database are showing up under the user profiles. (Example: c:/users/profilename/AppData/Local/VirtualStore/Program FIles (X86)/Company/SoftwareName/Data). We recently changed it to store the information in c:/ProgramData/Company/software however the same issue occurs and its creating local copies of the database and when the application runs it points to the local copy of the database. What we need is for all users to be pointed to and use the same database in ProgramData, is there something we are missing to accomplish this?
View 10 Replies
Jan 25, 2010
when the user clicks on the add button another form launches, which enables the user to add student info such as name, address, course, start date and end date, this information is then written to class when the ok button on that form is clicked, and then displays the data on the initial form in data grid. the user can add multiple entries and they are all displayed on the intial form and a the data grid is populatedwhen any of the rows in the displayed grid is selected, and the update button is clicked then the same form launches as the previous one and but this time its in the update mode and pre populates the form with the inital values.
View 3 Replies
Feb 6, 2010
I've been having a problem since installing the first beta of Visual Studio 2010 which has limited what i have been able to do. The problem centres around one reference: System.Design When I attempt to add the reference i get the following error: However, the System.Design.dll file actually does exist and is valid:
[Code]...
View 1 Replies
Dec 15, 2009
I have seen alot of references to WPF on the web while surfing Vs tutorials. I am using Visual Studios 2005 and was wondering if there is a way to use the WPF with 2005 version.
View 7 Replies
Apr 3, 2012
I have a pretty simple question, I have a form with a text box and was hoping if it would be possible to get my program to run a command and to use value in the textbox in the command? and if possible then to pipe the output to a text file
ie if my text box has ip address 192.168.1.1 and I click on the run button I want to run the following command
ping 192.168.1.1 >d: est.txt
View 8 Replies
Oct 12, 2010
I've been browsing and I noticed that there are addons you can install for your visual studios environment. What would some of these be? What are some addons you guys use that would be beneficial to a student? I have heard that certain addons block out default components, which I would like to avoid.
View 1 Replies
Feb 4, 2012
I been reading about the windows services in the msdn but I get lost quick because I'm not sure what it is that I actually need. I'm only using the standard version. Any pointers on how I can give a user the option to install my executable as a service so that it can run when no one is logged in.
View 1 Replies
Jul 1, 2009
hi allim trying to develope a website in vb.net using visual studios web develpoer 2008.i was wondering do any of ye know of any good tutorials on how to connect to a database. where i can update text boxes etc.
View 2 Replies
Oct 25, 2009
I can't seem to find the shape tool in the toolbox? When I used VB6 there was one, so why isn't there one now? I just want to set up rows of circles so I can change the color from inside instead of using images and saying
Code:
YellowCircle.Visible = False
BlueCircle.Visible = True
Instead of doing that I want to do
Code:
Circle.BackColor = Blue
How do I draw a shape in VB.NET? Not during the program, before.
View 3 Replies
Aug 4, 2009
Does anyone know if Windows sells this control that is used in Visual Studios:
I'm not really sure of it's name, I just call it a Panel Docking Control. I'm looking for any 3rd party versions of it also.
View 7 Replies
Jan 5, 2011
At present I have wrote an application (in-house CRM, vb .net 2010) which allows me to send emails under the selected customer & I categorised these emails.As these are categorised I can return data to display email history in my program by using search criteria:
Dim oMail As Outlook.MAPIFolder = oNS.GetDefaultFolder(Outlook.OlDefaultFolders.olFolderSentMail)
Dim sSearch As String
sSearch = "[Categories] = '" + "[" + tAccount.Text.Trim + "]" + "(" + tShipTo.Text.Trim + ")'"
Dim oItems As Outlook.Items = oMail.Items.Restrict(sSearch)
However the limitation to the above is it only looks at sent items & no other folder.My ideal solution would be to display all email correspondence for a certain contact.
View 1 Replies
Aug 27, 2009
I have created a Windows Service in VB.net for building xML from a database. I need to install it in my machine. I have followed all the steps as shown in [URL] When I right click on setup project and click install it opens the installation wizard and after hitting the next buttons it promptly says that the Service is installed successfully.When I go to Services I don't see the service. I refreshed the list and rebooted my machine n times.
View 2 Replies
Jun 9, 2011
I'm trying to make a form in VB.Net that takes speech input (not text-to-speech) on my Windows XP Pro computer.I've tried to install Microsoft Speech SDK 5.1 according to url..The problem is my Office 2007 does not have an Alternative User Input feature, as it says in the instuctions. So is there any way to get this on my computer? If not can you suggest any alternative other that buying a new computer for making my Visual Basic .Net form speech-enterable?
View 3 Replies
Jul 16, 2009
I am creating a windows service. I want to know that , is there any other way to install windows service than using installutil.exe ? I don't want to install my windows service on client's machine using command prompt. Better way if I can install it using setup.
View 2 Replies
May 1, 2012
I have been working on creating a windows service. I am using XP SP3, VB.net, VS 2010 Express, compiling for .Net 4.0 client profile. I have am using very rudimentary code templates that I've cobbled together.I have a class the inherits 'ServiceBase' and overrides the constructor, 'OnStart', and 'OnStop'. I also have another class in another .vb file in the same project that inherits from 'System. Configuration. Install. Installer' and overrides the constructor to add a 'ServiceInstaller' and a 'ServiceProcessInstaller' with the appropriate properties set for the service. The 'ServiceInstaller.ServiceName' is set to the same name as the service class and the installer class has the 'RunInstallerAttribuite (True)'attribute. Everything compiles and if I try to run the exe I get a message telling me it's a service and needs to be installed as such. but when I use installutil(.net 4) to install the service, it appears as though it was successful, but the service does not show up in the services list and I can't find registry entries for it either. I've checked the exe with the object browser and it presents the installer class with the 'RunInstaller Attribute' as it should. I included some code to create a file in the installer constructor and no file is created so I'm assuming that the installer class is never instantiated by installutil.
View 4 Replies
Jun 18, 2011
how to make Autorun installing for win Applicatin Visual studio that installing .net framework and sql server or all needed?
View 1 Replies
Sep 1, 2011
We are using a Windows 7 virtual machine as a testing platform for our VB 6 application. Th application utilizes an Access database.The application locates the database by looking at a configuration (ini) file.When I install the application on the virtual machine, it places a database where InstallShield directs it to and writes that path to the ini file. All well and good.However,somehow a second copy of the database is created in a user local folder.
If the user uses the "run as administrator" option, the application uses the database that is in the location designated in the ini file and that works fine. But if the user does not select the "run as administrator" option, the application apparently somehow attempts to use the local database and is unable to locate it.
Is this behavior is peculiar to the virtual machine, or is it something we need to be concerned about on "real" Windows 7 systems?If it is peculiar to the virtual machine, is there some way to get the virtual machine to behave more normally?
View 6 Replies
Dec 29, 2011
i running into an error when installing a windows service that i have created in vb .net. i followed the tutorial but i am getting an error. bellow is the log for the whole process until we get to the error. can someone please assist.
[Code]...
View 1 Replies
Aug 3, 2010
I created a simple windows service on my local PC and added the following code to it [code]...
Next I added a Setup project to this solution and added a custom action (By double clicking application folder then clicking add output folder then selecting primary output from the dialog). The solution builds fine but I have 2 problems.
1) Everytime I install the service, it asks me for the username, password and confirm password; I was wondering if there was anyway to get rid of it atleast while running locally. I tried setting the account type to user, local service, local system etc but it keeps popping up.
2) Once I enter the credentials (random ones), I get an error "No mapping between account names and security ids was done".
View 1 Replies
Apr 2, 2010
I have had some success making a windows service but I can�t seem to fix a simple issue
I can get the service to run through my code once, but I can�t get it to loop, well I can but then the service will not start correctly and just times out while the code is running.
How can I get the service to start and then loop, at the moment it just says starting service and the code is looping but the service wont start! Windows times it out after a few mins.
Public Class WwService
Dim sDate As Date
Dim con As New OleDb.OleDbConnection
[Code].....
View 4 Replies
Oct 19, 2010
How can I find the OS using Visual Basic 2010? It does not seems to recognize any of the old commands like GetVersionEx etc.
I am looking to find out the Windows Version, Build, 32 or 64 bit, RAM, Processor and Manufacturer.
View 2 Replies
Dec 3, 2011
Am very new to programing and have never done it before.I am working on very small things at the moment like showing the time and date very basic stuff. i have some books and video's so am going over but i just need abit of code for now -
How can i display what version of windows i am running? for example.i have a button if i click it the label on my form will display the version of windows.
View 7 Replies
Oct 20, 2009
Account Type for installing a windows service
View 1 Replies
Sep 24, 2011
Error in installing Windows service using instllutil.exe in vb.net
View 10 Replies
Feb 12, 2007
I new to .net My project involves developing a windows service application using VB .NET. I have installed the service successfuly on the first attempt using the installutil provided by the frame work.When i uninstalled the application the it gave me the following result.
System.ComponentModel.Win32Exception: The specified service does not exist as an installed serviceAn exception occurred while uninstalling. This exception will be ignored and the uninstall will continue. However, the application might not be fully uninstalled after the uninstall is complete.
The uninstall has completed.
When i tried to install the app again it gave me the following error
An exception occurred during the Install phase.System.ComponentModel.Win32Exception: The specified service already exists
I removed the application from the list of application event log entries in the registry(HKEYLOCAL_MACHINESYSTEMCurrentControlSetServicesEventLogApplication) ant tried installing the app agin it installed successfully. Why is uninstalling the service not removing the entry from the registry.
View 12 Replies
Mar 18, 2010
I have a windows service that I've written in vb.net using vs 2008 targeting ASP.NET 3.5. It appears that it's installing in a running state, but with the start mode set to manual. Is there a way I can have the service be initially stopped? I assume that it would be something in my service installer, but haven't been able to find it.
View 4 Replies