I am just trying to display three payment types of the different mortgage interest rates and terms listed in the arrays. the loan amount is constant.
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code].....
I have a function which takes in an integer value. I want to be able to grab the first digit (or the first and second digits in some cases) of this integer and do something with it.What is the best way in VB.NET to get the first digit of an integer (or the first and second)?
View 6 RepliesI'm trying to find the mean (or average) of the test scores input into txtQuizScore Text Box. [code]...
View 1 RepliesI have a problem when debugging a code. On top of class I declare an array, and the length of array is an integer variable which is applied value below declaration of array.
E.g. class declaration
Dim array1 (2, integer) as string
Public Sub
integer = 5
End Sub
So basically, array is created with integer being 0 or whatever, because it is declared before integer was assigned a value. But the problem is, I need it to be declared at class variable so I can use array in different subs.
Why is it giving me an error for this code
intWordNum = Rnd() * (strWords.GetUpperBound(0))
This is the error
Error 8 'GetUpperBound' is not a member of 'Integer'.
I was working on editing a code for a simple text program, but when running the program for multiple lines, the text being read gets too long or too many lines, the computer slows down alot and almost stops functioning. I am using standard integers like document.lines.length or listbox.lines.count. I think these are standard integers and I need to know how to enable them as Long of Float Integers.
I'm assuming I just change
Dim X as integer to
Dim X as long
or Dim X as int16
But I'm not sure as everytime I change something I get cannot convert to double. The code I'm interested in changing is ...
For i As Int16 = 0 To ListBox1.Items.Count - 2
The list box will only get to about 3000 items or so.
and
For iPos = 1 To xy
If Mid(sString, iPos, Len(Text1)) = Text1 Or Mid(sString, iPos, Len(Text2)) = Text2 Then
JJ = TextBox1.GetLineFromCharIndex(iPos)
This read box will read documents above 32,000 lines, which is the reason for not wanting to use Integer.
I ran into a strange issue over the weekend while I was working on an asp.net mvc project in vb.net. I created an extension method to convert an integer to the corresponding month it is associated with. I tested the extension method in a console application so I know it is working. In my asp.net mvc project I have a view and want to call the extension method but I get an error that the extension method is not recognized. I imported the namespace it was contained in and still couldn't shake the error. Any idea what's going on? The code is below.
Extension Method:
Imports System.Runtime.CompilerServices
Module SiteExtensions
<Extension()> _
[code]....
Error:"ConvertToMonth is not a member of Integer"
how do I overcome it? I have created a class and compiled into .dll This code
[Code]...
In Visual Studio 2008, if I do this:
[Code]....
Does anyone here know how to get the above to work WITHOUT warnings being generated?
In the following code i get a warning at line 59:Warning 1: Access of shared member, constant member, enum member or nested type through an instance; qualifying expression will not be evaluated.and.. At line 78 I get this Warning:
Warning 2 Property 'SelectedCustomer' doesn't return a value on all code paths. A null reference exception could occur at run time when the result is used.
The program compiles and runs well, but i cant' undesrtand the reason for these warnings. Any Idea ?
1: Public Class Form1
2:
3: 'Form level members
4: Private objCustomers As New ArrayList
[code]....
Cannot appear to be able to get this function to not have the above error.Private Function GetIncidentActions(ByVal FromAgentID As Integer, ByVal ToAgentID As Integer, ByVal incidentAction As Integer, ByVal ActionDate As Date) As String
[Code]...
I have been working on this program for over 2 weeks when I decided to go ahead and rename the mainform(from 'form1.vb' to 'FormGenerator.vb') and subform(from 'form2.vb to 'GeneratedCode.vb'). Now I getting two errors within the main form [code]...
View 4 Repliesthis is not working?
[Code]...
End WhileI am trying to read from the ": " to the end of the line. I keep getting this error: Index and length must refer to a location within the string. Parameter name: length
am getting the above exception while swaping Items in the list(lstRoutePriority).PFB my code
if (lstRoutePriority.SelectedIndex > 0)
{
//Swap the two items
[Code].....
I'm "cloning" objects in my code. For instance: objClone = objOriginal My question is: Does the assignment operator in VB.NET 1.1 do a member-by-member copy of the objOriginal to objClone or does objClone simply point as a reference to memory referenced by objOriginal?
View 3 RepliesI have a field displaying on a datagrid that the user has asked to be variable length based on the data that is returned. Is there an easy way to determine how many characters are returned for a field and then converting that to a pixel length so that I can change the length of the field in the code.
View 2 Repliesi changed a class variable to shared so i can access it in all instances of the class, but it caused an error. what is causing this, and how can i fix it?
Private
Shared img As Bitmap
Me
.img = bgImage
I have 2 tables Table A & Table B Table A has the table values that I want to be populated in a datagridview control.The challenge is that column 1 in table A contains an ID(foreign key) to a name field that is a located in table B. I need the datagrid to have the first column be a combobox that displays the names(from Table B) that are already in table A via the ID's, but reference the populating values from Table B. So that when you bring down the combobox you would be choosing from Table B data but populating table A with the ID and you would see a name there instead of an ID.[code] How do I populate my DS dataset with Table B? And how can I create a link to these two tables using a bound datagridview control?
View 1 RepliesI get this error if I follow these steps: Change property Y of an object (an associated entity property)
Attempt to submit changes At this point the value of Y and the value of X (the underlying key) are not in agreement -- LINQ to SQL apparently doesn't synchronize these until GetChangeSet is called.An expected error occurs due to some business logic or database level constraint during the update operation.At this point the value of Y is in agreement with X because GetChangeSet was called.Change the value of Y to Nothing (aka null).Call GetChangeSet.
The error occurs on the last step because the value of X and the original value of X (returned by GetOriginalEntityState) are different, and the new value does not agree with Y? Is that why? Is this a bug in LINQ to SQL. Must be because I don't see the same behavior if I change Y to another (non-null) value instead during step 5. What's the right way around this? I can see a few ways:
Discard the DataContext when an error occurs and leave the UI as-is. I don't like this because then optimistic cocurrency change conflicts cannot be detected. The new context doesn't have the original values in it that were populated at the same time the UI was populated, so if the UI has any stale values in it, they will cause data in the database to revert.Refresh the datacontext (OverwriteCurrent) and leave the UI as-is. I don't like this for the same reason as #1.Refresh the datacontext (OverwriteCurrent) and re-populate the UI. I don't like this because then the error message just presented to the user does not show the user the error they made and allow them to correct it. It also discards all the other changes the user may have made.When the error occurs, explicitly retrieve the key for Y that corresponds to the original value of X and reset Y, then call GetChangeSet to re-synchronize X (X is read-only or private so I can't reset it directly). This seems to work, but seems like a hack, and may require lots of code for other similar errors.
I know I have done this before and as I remember it should be really easy. But for some strange reason I can't do it now and I am about to jump off the building.I will make it simple:Two tables, one is just a list of products and their code.The other table: "details" has a field named product. I want to store only the code there.In the second table's entry form, I am putting a combobox. This combo box should display the list of products, their names, but depending on which one is selected, the code is what is passed to the table "details". Currently If I set the display member to product and the value member to code it still pases the product to the binded data source.
View 3 RepliesI have a database that holds information about a particular job. One of those things is a customerID. CustomerID links to another table containing customer details. I have a combo box attached to a custom object that holds customerID as the valuemember and CustomerName as the displaymember.The JobDetails holds the customerID info. How do I set the default selection in the combobox based on the ValueMember of the combo box?
View 2 Replies"Index and length must refer to a location within the string. Parameter name: length" whenever I run this code
[Code]...
If using the following in an if statement I get an error: If trg.Name.Substring(4, 6).ToUpper <> ("ABCDEF") Then I get the error: "Index and length must refer to a location within the string. Parameter name: length"
I assume this is because the string (trg.name) is too small for the 4, 6 substring. What would be the correct method of working around this problem? VB.net Studio 2008.
in VB.NET you implement an interface like this...
Sub SomeInterfaceMember()
Implements ISomeInterface.SomeInterfaceMember
End Sub
while in C# you do it explicitly like this (which can only be called via the interface)...
void ISomeInterface.SomeInterfaceMember(){}
or more simply, implicitly like this...void SomeInterfaceMember(){} // Note the name matches the interface member However, regarding VB, I can also do this...
Sub SomeRandomMemberName()
Implements ISomeInterface.SomeInterfaceMember
End Sub
In other words, the method that handles the implementation can have a completely different name than the interface's member name.I'm just wondering if there's something similar to this in C#. (Yes, I know I can simply do an explicit interface, then access it via another 'wrapper' member with a different name that simply delegates to it, but in VB.NET?
ive got some simple problem i cant understand how to solve.
str(1) is an array and integer(or double, tried both)
a(1) is an array and integer (or double, tried both)
a(1) = a(1) + 1
Label1.Text = str(1) + a
the big part is where i get: operator '+' is not defined for types 'integer' and '1-dimensional array of integer'.why do i get that message and what does it mean? how do i make the code do what i want?
I faced an error when upgrading VB6 code to VB.NET. The error occurs at AddressOf WindowProc
AddressOf expression cannot be converted to 'Integer' because 'Integer' is not a delegate type
My declaration for SetWindowLong is:
Declare Function SetWindowLong Lib "user32" Alias "SetWindowLongA"(
ByVal hWnd As Integer,
ByVal nIndex As Integer,[code]....
What is the reason for the error I get?
I'm trying to create a linked list of an array of integers. Why is the following implicit conversion required?
When I run the code that contains that conversion, I get the following error.
As a real-time data acquisition user control data (a packet of an array of bytes) arrives every second, is converted into an integer array and inserted into a linked list.
The most recently arrived data is painted as coordinates on a grid at the right of a PictureBox using Graphics.DrawLine (pen,X1,Y1,X2,Y2).
The oldest data (arriving 120 seconds ago) will be drawn at the leftmost portion of the Picturebox.
Why a linked list rather than a list? To display 120 views of time sequence data, the draw routine the most recently inserted node to a node that points to Nothing. How do I limit the length of the linked list to 120 nodes and always ensure that the last node points to Nothing?
Do While Not item Is Nothing
item = item.NextItem
Loop
I am a newbie in VB and I got a piece of code which can display the current running program. I need to use that in VB2005 and I got the below error message. Can anyone help how to fix it?[code]
View 18 RepliesI'm trying to convert a VB6 project to .NET, but I get problems with some callback functions, and the following message comes up: "AddressOf' expression cannot be converted to 'integer' because integer is not a delegate type" I've seen several solutions to similar problems like this, but I am not able to understand this issue with delegates.
After the conversion, the code look like this:
Declare Function vsmsgwSetDataPackageCB Lib "vsmsgwW.dll" (ByVal PACKAGE As Integer, ByRef arg As Integer) As Integer
Dim arginitP As Integer
[Code]...
Which gives the error: Method 'Public Function PackageCB(HisNodeID As Integer, ByRef data() As Byte, ByVal length As Integer, ByRef arg As Integer) As Integer' does not have the same signature as delegate 'Delegate Function DelegatePackageCallback(hwnd As Integer, lparam As Integer) As Integer
I have a LINQ2Entity problem, I want to get the value, string, from a database, so I select FProducts.Serial_number, and to end the query, I do .ToDictionary. The problem is, it tells me that it doesn't have sufficient parameters, to convert ToDictionary. So I need something like select FProducts.Serial_number, Nothing). ToDictionary. Also FProducts.Serial_number, 0).ToDictionary doesn't work.
Sub GetStatistics(ByVal ProductNumbers As List(Of String), ByRef Passed As Integer, ByRef FailedProducts As List(Of String))
Passed = 0
FailedProducts = Nothing
[Code]...