I get the following error:
Line 1: Incorrect syntax near ','. Unclosed quotation mark before the character string ' )'. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException
[code]....
This function gives me the folowing error; Unclosed quotation mark after the character ')', Incorrect syntax near ')'
Private Sub Exportdatapateid()
Dim cmd As New SqlCommand
Dim conn As SqlConnection = GetDbConnection()
Dim query As String
[code].....
I have the following INSERT statement which at run time gives the error; Incorrect syntax near 's' Unclosed quotation after the character string ')'
[Code]....
when saving am getting this error"undiscclosed quotation mark after the character string')'.incorrect syntax near ')'.I used the command in other codes which working perfectly. [code]...
View 10 RepliesWhen I run this code, it gives me an error when vision_patid shows a value - 11BC.
Incorrect Syntax '11' - Unclosed quotation mark after the character string ''.
Code:
query = "UPDATE tblProjectPatients SET " & _
"Yes ='" & CBool(DgvReturns.Rows(irow).Cells(2).Value) & "', " & _
"No ='" & CBool(DgvReturns.Rows(irow).Cells(3).Value) & "', " & _
"InV ='" & CBool(DgvReturns.Rows(irow).Cells(4).Value) & "', " & _
[Code] .....
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim SQLData As New System.Data.SqlClient.SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True")
Dim cmdSelect As New System.Data.SqlClient.SqlCommand("SELECT * FROM Table1 WHERE Date ="
[code].....
I received the following error when the function shown below:
Unclosed quotation mark after the character string ')'.
The name "test" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
Private Sub addnewprojtype()
Dim query As String
Dim cmd As New SqlCommand
Dim conn As SqlConnection = GetDbConnection()
[Code] .....
I have the following update code which works fine. However, it prompts an error when apostrophe (') is used in txtdesc.text. For example if you type name's , the error message will be..
Incorrect syntax near 's'
Unclosed quotation mark after the character string ".
query = "UPDATE dbo.TblProjects SET ProjectDesc ='" & _
txtProdesc.Text & "' where ProjectID='" & _
txtProjectID.Text & "'"
cmd = New SqlCommand(query, conn)
cmd.ExecuteNonQuery()
I am facing an error in vb.net and sql server while inserting string value "Name D'Souza" into SQL. The error is "Line 1: Incorrect syntax near Souza. Unclosed quotation mark before the character string ' " In VB.net Variable is declare as string, in Stored Procedure and in SQL Table variables are declared as Varchar.
View 3 RepliesI am encountering a problem. I want to write a string into a text file, and string is:
[Code]....
How can i write string in sequential file without quotation-mark?
View 3 RepliesTrying to find out the cause of 'Incorrect syntax near ,. in the insert statements below :reason didnt use the GetDate() for the sInputDate and sSuccessDate is to manually get the precise datetime.now in the upper code and calculate the difference with the sSuccessDate.
strSuccessDate2 =
DateTime.Now.ToString("MM/dd/yyyy HH:mm:ss")
If (IsDBNull(ds.Tables(0).Rows(0)("fExpireDate")) = True) Then
strSQL2 = "INSERT INTO tSMSSendLog (fBatchNo, fOrderNo, fRefNo, fDataRefCode, fPriority, fFromID, fMobileNumber," & _
[Code]...
cmd = New SqlClient.SqlCommand("select(pname,MRP,rate,dis) from stock_table where pid = '" & Val(ComboBox1.Text) & "'", con)
adapter.SelectCommand = cmd
adapter.Fill(ds1)
I am getting the error in the last line ..
I want to match a string embedded in double quotation marks. For ex.
He is "Best Friend" of my family. I am going to get
Best Friend Could you look at my pattern?
(?<q>["']).*?k<q> Right or not?
I have the following code:
Imports System.Data.SqlClient
Public Class Main
Protected WithEvents DataGridView1 As DataGridView
[code]....
When I debug this, I put the line break on that line and look at the Table Value, which shows 0, but I know that there is data for that time frame.
Getting this error when updating a row via a gridview with a sqldatasource in Vb.net/SQL Server 2000. No matter what input (1/1/2010, blank, etc) I give it I can't seem to get it right.
Code before the input is passed to the sp:
Dim sqldatenull As DateTime
Dim DateVerify As DateTime
sqldatenull = DateTime.MaxValue
[Code]....
Im in the process of building a call loggin system and its finally been put on the server, but i keep getting the above error "Title" the first stage it goes to be authorised and when the authoriser auths it...it updates the table with the date they authorised it. which is fine, the next stage is the Business Analyst where they check all the content of the task and then approve it but for some reason unknown to me it keeps falling over on the .dateAuthorised
My Sql Column to hold the date authorised is a Datetime datatype and im converting a string to a data time within the procedure this is my Code behind page
Dim StatusNew As Integer = 53
Dim CurrentStage As Integer = 51
ITUpdateTaskTable.Add("@spWorkID", Replace(TskNumLab.Text, "LC", ""))
[Code].....
I have the following code:
Imports System.Data.SqlClient
Public Class Main
Protected WithEvents DataGridView1 As DataGridView
[Code]....
When I debug this, I put the line break on that line and look at the Table Value, which shows 0, but I know that there is data for that time frame.
I am using a WPF richtextbox to create a syntax highlighter for code provided in a textbox. I want to have it automatically adjust the rich textbox as I am typing, using a thread timer I reset the contents of the rich textbox. I am trying to keep the cursor where it is suppose to be. I don't loose any text characters during the parse (except line breaks).
I don't know how to keep the caret position where the user has left it in the text. It defaults to the end of the document. I attempt to store the current caret position in the text and then set it to the document after I make my changes, however the error I receive is "Cannot set CaretPosition to be outside of RichTextBox." So I set the caret position to the bottom of the document.
WPF, VB.net, .net Framework 4.0
Here is the code.
Public Sub FormatText()
If IsNothing(rtfContent.Document) Then
Exit Sub
End If
Me.rtfContent.IsEnabled = False
[Code] .....
I used to have this one
Dt = MyMod.GetDataTable("SELECT TOP " & QuestionsPerCats(i) & " * From Questions WHERE CategoriesID ='" & Cats(i) & "' ORDER BY NEWID()")
but now i decided to use sqlparameters like
Dim cmd As New SqlCommand("SELECT TOP @QuestionsPerCats * From Questions WHERE CategoriesID = @CategoriesID ORDER BY NEWID()", conn)
Dim sqlParam As SqlParameter = Nothing
sqlParam = cmd.Parameters.Add("@QuestionsPerCats", SqlDbType.SmallInt)
[code]....
and returns the following error
Incorrect syntax near '@QuestionsPerCats'.
It was suggested that I use xmldocument.load to do a sql insert statement instead of BULK INSERT.However when I run the Sub I am getting this error: "Incorrect syntax near '<'. "Here is my code, I have no clue what is causing this error, or how to fix it.
Sub AO()
Dim Z As String = Microsoft.VisualBasic.Format(Today.AddDays(-1), "MMddyyyy")
Dim AO_Name As New String("\NetImportAO-M_" & (Z) & ".xml")
Console.WriteLine(AO_Name)
[code].....
I have a problem with this visual basic statement every time it runs it gives me an error saying: incorrect syntax near? ive checked i a lot of times and i still cant find the problem.. heres the statement:
Sub InsertNewRecord()
Me.Text = "Inserting New Record"
Dim cmdInsert As New SqlCommand
[Code]....
in vb 10 i want update my filed my syntax is true but when i click change button this error is appear
Incorrect syntax near 'l_name'.this is my code
i wrote in public sub Public Sub Sabt()
[Code]...
this is the simple select statement I have for target bid date:
ProjectOverview.[Target Event Date - Date] AS [Target Bid Date]
now, I want to ask how can I select the latest target event date and if value is null, put "no date" caption i tried doing this:
isnull MAX(ProjectOverview.[Target Event Date - Date],'INACTIVE') AS [Target Bid Date]
but it says:
Incorrect syntax near 'ProjectOverview'.
String cannot be converted to date?
Dim ProjectID As Integer
Dim CostCentre As String = Nothing
ProjectID = 3 ''datProject.Tables("Project").Rows(intRecordNum)!ProjectID[code].....
I am new to VB.NET. I'm trying to add a table to an ASPX page. But I get the above error with the following code. Can you tell what I am doing wrong? I want many table rows returned; one for each product, where first cell = product name, cell 2 = NumOpen, and cell 3 = 95%.[code]
View 2 RepliesCurrently using Microsoft SQL server 2008 in Visual Studio 2010
spot the mistake near the keyword 'INNER'
Dim selectSQL As String _
= "SELECT M.MID, M.MT, MS.SD, MS.TS" _
& "FROM M " _
[Code]....
I've got a GridView. My SelectCommand in the code works if I copy and paste it into SQL Server Management Studio. It executes fine.If I run the page and click Edit for any row I get the error:
"Incorrect syntax near the keyword 'IS'."
I've tried to see what's going on using SQL Server Profiler. Here's what the SelectCommand looks like and what SQL is receiving...
SelectCommand from supplies.ascx
SELECT some stuff FROM here WHERE (this IS NULL) and (that=1) ORDER BY this DESC
SQL Server Profiler reports
SELECT some stuff FROM here (this IS NULL) and (that=1) ORDER BY this DESC
I didn't put any code here because I'm not really sure what would be relevant and didn't want to load up the post with unnecessary lines of code.
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="fldSupReqID"
DataSourceID="SqlDataSource1"
EmptyDataText="There are no data records to display." AllowSorting="True"
[code]....
I am trying to create INSERT SQL using WHERE syntaxing in order to ensure no duplication with the SQLCMD.PARAMETER but the WHERE clause generate this error message:Incorrect syntax near the keyword 'Where'.
Here are the coding:
Dim strSql As String
strSql = "Insert into tblCustomers "
strSql &= "(CustomerID, ContactName,Address,City,PostalCode,Country)"
[code]....
i am having an sql query in catch block. the code is:
Dim str_exception
As
String = ex.Message
Dim sql5
As
[Code]...