Apostrophe Error - Unclosed Quotation Mark After Character String
Aug 12, 2010
I have the following update code which works fine. However, it prompts an error when apostrophe (') is used in txtdesc.text. For example if you type name's , the error message will be..
Incorrect syntax near 's'
Unclosed quotation mark after the character string ".
query = "UPDATE dbo.TblProjects SET ProjectDesc ='" & _
txtProdesc.Text & "' where ProjectID='" & _
txtProjectID.Text & "'"
cmd = New SqlCommand(query, conn)
cmd.ExecuteNonQuery()
I am facing an error in vb.net and sql server while inserting string value "Name D'Souza" into SQL. The error is "Line 1: Incorrect syntax near Souza. Unclosed quotation mark before the character string ' " In VB.net Variable is declare as string, in Stored Procedure and in SQL Table variables are declared as Varchar.
When I run this code, it gives me an error when vision_patid shows a value - 11BC. Incorrect Syntax '11' - Unclosed quotation mark after the character string ''. Code: query = "UPDATE tblProjectPatients SET " & _ "Yes ='" & CBool(DgvReturns.Rows(irow).Cells(2).Value) & "', " & _ "No ='" & CBool(DgvReturns.Rows(irow).Cells(3).Value) & "', " & _ "InV ='" & CBool(DgvReturns.Rows(irow).Cells(4).Value) & "', " & _ [Code] .....
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim SQLData As New System.Data.SqlClient.SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True") Dim cmdSelect As New System.Data.SqlClient.SqlCommand("SELECT * FROM Table1 WHERE Date ="
I received the following error when the function shown below: Unclosed quotation mark after the character string ')'. The name "test" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
Private Sub addnewprojtype() Dim query As String Dim cmd As New SqlCommand Dim conn As SqlConnection = GetDbConnection() [Code] .....
Line 1: Incorrect syntax near ','. Unclosed quotation mark before the character string ' )'. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException
when saving am getting this error"undiscclosed quotation mark after the character string')'.incorrect syntax near ')'.I used the command in other codes which working perfectly. [code]...
I am using a WPF richtextbox to create a syntax highlighter for code provided in a textbox. I want to have it automatically adjust the rich textbox as I am typing, using a thread timer I reset the contents of the rich textbox. I am trying to keep the cursor where it is suppose to be. I don't loose any text characters during the parse (except line breaks).
I don't know how to keep the caret position where the user has left it in the text. It defaults to the end of the document. I attempt to store the current caret position in the text and then set it to the document after I make my changes, however the error I receive is "Cannot set CaretPosition to be outside of RichTextBox." So I set the caret position to the bottom of the document. WPF, VB.net, .net Framework 4.0
Here is the code. Public Sub FormatText() If IsNothing(rtfContent.Document) Then Exit Sub End If Me.rtfContent.IsEnabled = False [Code] .....
I am having a problem trying to resolve an apostrophe related issue. I have searched SO,
My clientside javascript code is: var strUserText = uSettings.replace(/'/g, "'")
after the above line is executed, the form does a submit
document.form1.submit(); in code behind, a class retreives those values:
sUserSettings = request.form("strUserSettings ") the result is a semi-truncated string.Given the above code process flow, how can I save "John O'Brady's ASP Blog" in to a database?
I thought I was saving "John O'Brady's ASP Blog" but that isn't working.
Am just wondering if I'm doing something the long way round, so I thought I'd bounce it off the forum for opinion. I'm using the following code to write the contents of three text boxes into a table in an access database. [Code]
During testing I noticed that when an ' (apostrophe in words like can't) was used in the text boxes it would cause the app to halt. Figured that it was due to the ' being interpreted as a command so I could replace all of the ' in the text with a "unique" character before writing it to the database, so then when it is read back I could re-replace the "unique" character with the ' so the user sees what they have entered.
My question: is there a more efficient way of handling this ?
I just ran into what I consider a very strange issue in the execution of some code that I thought I had completely well-understood.
Basically, I was using this kind of notation:
If strOne.equals(strTwo) Then
rather than
If strOne = strTwo Then
I came from a c and java background, and using the '=' operator for comparison has always made me cringe, so I've used the .equals() comparison function thinking that it was equivalent. But just now some of my code broke. It encountered a string containing "Eagle's Nest: Dawn Patrol", used the .equals() to compare it to "Eagle's Nest: Dawn Patrol" and declared them not equal. I changed the code to use '=' rather than '.equals()' and it declared them equal. I also did this:
If strOne.Replace("'", "").Equals(strTwo.Replace("'", "")) Then
And again, it declared them equal.
This has me a little rattled because my code is filled with the use of .equals(), and I've used it assuming that it was no different than writing strOne = strTwo. I've scanned the interweb looking for information about this. I have not found any information about odd interactions between the apostrophe (or other) character(s) and .equals(). Microsoft's documentation does not hint at any subtle differences. how .equals() differs from '='
Getting this error when updating a row via a gridview with a sqldatasource in Vb.net/SQL Server 2000. No matter what input (1/1/2010, blank, etc) I give it I can't seem to get it right.
Code before the input is passed to the sp:
Dim sqldatenull As DateTime Dim DateVerify As DateTime sqldatenull = DateTime.MaxValue
Im in the process of building a call loggin system and its finally been put on the server, but i keep getting the above error "Title" the first stage it goes to be authorised and when the authoriser auths it...it updates the table with the date they authorised it. which is fine, the next stage is the Business Analyst where they check all the content of the task and then approve it but for some reason unknown to me it keeps falling over on the .dateAuthorised
My Sql Column to hold the date authorised is a Datetime datatype and im converting a string to a data time within the procedure this is my Code behind page
Dim StatusNew As Integer = 53 Dim CurrentStage As Integer = 51 ITUpdateTaskTable.Add("@spWorkID", Replace(TskNumLab.Text, "LC", ""))
Trying to split a line wherever "," appears (with the quotation marks), The problem is VB.NET uses " to start/end strings, so I tried using .Split(""",""") but that then splits it by " not ","
why the rowfilter property does not work if there is an apostrophe in present in the string. For e.g. , tempdat.DefaultView.RowFilter = "Mystring = '" & st & "'" the above does not work if st="mystrings's" under the column header Mystring.
The error is: Conversion failed when converting date and/or time from character string.Basically I'm trying to make it so that when someone clicks a location in a list box it increments the correct field in a Stats table by 1 to say that they clicked the location. I've been trying to solve this for a while now and can't get anywhere. My date is in date format, and so is the Date field in my Stats table. My code can be seen below.
Dim Current As String Dim Check As String Dim objCmd2 As Object
[code]....
The issue comes in with the second SQL statement I think. I don't understand why adding a date into a date field would be an issue, I've tried adding it as a string which didn't work.
Dim i as integer For i = 0 to 365 sqlinsert.InsertCommand="insert into cashdate (date) values (getdate()+'" & i & "')"[code]....
getdate is a function in the database that returns the datetime of now i have an error that says conversion failed when converting date or time from character string .what to do now ??
Is there an Excel text file format (XlFileFormat) to export that will not put quotation marks around strings? I've tried xlTextWindows. Maybe there is an additional setting I'm missing? Most of the time, the datasets I'm exporting are in CSV, but I have a situation where I still want to export with an Excel type (long story) but really it is just a small blob of text. Otherwise, I'd just export to a text file; trying to avoid that for this one case.
[Edit]In this case, I have an Excel workbook with a single worksheet, with one cell (No header) with the text: [Reports]
For each character of this string I want a new character out of the string and then remove the character from the list of characters that still maybe used for other characters. It may not get the same character, you could basically just call this encryption, but it's not what I am making. I don't want to waste my time doing this one hour while VB can do this for me in <1 second.
I am writing a hangman type game and I am displaying the word to the user in a label as all *'s, but I cannot figure out how to have just one of the *'s changed in the label to the correct letter when the user inputs the correct letter into the text box and clicks the check letter button.Everything else in the program works perfectly, except for this part.[code]When I use the .Replace it changes all of the *'s to the correct selected letter.
the coding is to 'Get input string and put its character into List, and replace the character with other.'but having problem putting each character into List and also replacing it,[code]
