Code:
p = -1
Try
ListBox3.SelectedIndex = p
Catch ex As Exception
ListBox3.SelectedIndex = -1
p = ListBox3.SelectedIndex
End Try
Just cycles through my listbox without exiting the try. It keeps having an error causing the catch again.
1) Diff b/w nothing & string in terms of variable declaration.
2)Erase keyword.I have never heard of such keyword in mine whole 1 + yrs of exp.
3) Diff b/w functions & properties? I say,Functions return a value,But propertiesare used to set or get the values. He say properties also return a value.
4)How can we use a class as a datasource?
5)Partial Class? hey frnds above question is for C++ na.Or there is also such class in VB.Net.
6)When the error stack overflow comes?
7) How we can we make indefinite loop , without uusing any variable declaration.
I made a game in VB .Net that uses tcp and sends messages back and forth.What is happening is, every so often, the message cannot be sent quickly enough, so then the TCPObj.connect() method goes into a loop, until it reaches the timeout and then spits out an error. Most of the time though, it never gets to the error, my application just freezes, and then comes back after TCPObj.connect() succeeds. How can I make the connect() method do application.doevents while it's trying to connect? Basically, I dont want it to freeze up my whole application. Since tcp.connect() is a .NET method, I can't go in and add application.doevents.
View 3 RepliesIs it possible to write an infinite for loop in VB.NET?
View 3 RepliesI am a student attempting to learn VB.NET on my own. Today I wanted to tackle the BackgroundWorker component. I found an excellent article online: How To Use a Background Worker. I successfully completed the walkthrough and even performed the "adventorous" part that dealt with working with controls updating across threads using delegates.Now I came to a part that I didn't understand how it was working. To summarize the following code, I have a delegate that has a Label and a String in its signature. I then have a subroutine that is called on the worker thread. Inside this subroutine the delegate is created and (I guess) ran again so that it is on the same (Main) thread. Please correct me if I'm wrong here.
Here is the method is performed on the worker thread:
Private Sub My_BgWorker_DoWork(ByVal sender As Object, ByVal e As System.ComponentModel.DoWorkEventArgs) Handles My_BGWorker.DoWork
[code].....
I am making a program thats going to be an msn style popup for reminders. I made an infinite loop to activate the popup when the date = current date. However its stuck in the loop and I cant run other functions while the loop is running. How can I get the alert to go off while also running the program?
Public Class Form1
Structure List
Dim Name As String
Dim Day As Date
Dim Hour As String
Dim Min As String
[Code] .....
While building out an interface for patient/client lookup, we have a pull from out FoxPro EMR creating the patient table and populating the lookup on the EU interface.
[Code]...
I am trying to use a Web Service to return Json for a Collection of Users from a Database Table. I'm only new to .NET (< 1 week experience), and I don't want to use the UpdatePanel for AJAX. I have tried using the JavaScriptSerializer as well as Json.NET to serialize. Both cases seem to spawn an Infinite Loop.[code]
View 1 RepliesI'm bubble sorting an array called number which starts at (1) and ends with (6), the code I'm currently using is this:[code]
View 2 RepliesI wanted to draw a chart on a picture box. So I create a form, put a picture box on it, and then in the code of Form_load, I put a handler to the paint event of the picture box. This seems to create an infinite loop, judging from the behavior of the form.
View 19 RepliesWhenever I try to create a new CD object I get a stack overflow. I want a parameter to be passed into mediaFactory so that it could be determined what type of media is created. Why I might be having problems with this when I do this
"Dim media As CD = New CD()"
Public MustInherit Class MediaFactory
Inherits MediaContext
Implements IMedia
Public Sub New(ByVal typeId As Integer)
[Code] .....
Following code is used in a .NET 2.0 windows service to continuously monitor a the table in the Database.[code]Seelctjob method will connect to SQL server 2005 database and executes the following Select query to see if there is a record with a particular status code.[code]This Select Query is executed continuously. If there is a record Start method will process further.I want to avoid executing the query continuoulsy. I tried using Sleep method and timer control. Thread.Sleep method stops the execution for sometime.[code]What is the best way of connecting to DB and monitoring a table at regular intervals of time without having much performance impact? When to use thread.sleep and a timer control and what is the difference between them?
View 4 RepliesThis code hangs in infinite loop. Any ideas why is that? Is that a bug in .NET? Can I do something about it?
Dim urlRegex As New
Regex("((?:[a-z][w-]+:(?:/{1,3}|[a-z0-9%])|wwwd{0,3}[.]|ftp[.]|[a-z0-9.-]+[.][a-z]{2,4}/)(?:[^s()<>]+|(([^s()<>]+|(([^s()<>]+)))*))+(?:(([^s()<>]+|(([^s()<>]+)))*)|[^s`!()
[code].....
Im working with and trying to run an infinite loop on a new thread which at some point takes action (e.g. make changes to Viewport3D). But no matter what I use:
- BeginInvoke
- Background Worker
- Timer
I run into problems. My porblems are:
[Code]....
I am doing all this in WPF.
How can I run the loop in the background and get it to affect the Viewport3D controls content without throwing an error or freezing up the application? A Viewpoirt3D is a control in WPF.
I am descending all the directories of my C drive to get a complete list of all extensions.When I get to: C:Windows.oldDocuments and SettingsAll UsersApplication Data
the program goes into a loop: C:Windows.oldDocuments and SettingsAll UsersApplication Data Application Data Application Data until the path exceeds maximum length (248 characters for the directory).
[Code]...
As you all know, If the dataBase requires a numerical value then an error will occur when the user tries to insert the incorrect data type. With the code below after the user types in a value beside an int value type then it will go into an Loop through more than what is needed. How can I apply the same logic but allow the program not to check the 60 rows (I set the row size to 60). I want to break out of it if there are blanks ONLY if a row is blank and not for a black cell, because if the user leaves one cell blank then it would loop through the 'for each' for how many rows that they is. Initially there are 60 rows.
MIS
For Each item As DataGridViewRow In dgvLaser.Rows
If IsNumeric(item.Cells(3)) Then
Exit For
Else
MessageBox.Show("Check Record Count. Numerical values only..!")
End If
Next
I am trying to create a program that the user enters the number of enrollments for 5 different campuses during two semesters. I just got started and here is what I have so far but when I run the program it is stuck in an infinite loop and will not go to the next function. I am not sure how to end the loop. Here is what I have so far:
Module Module1
Dim SIZE As Integer = 5
Dim campus() As String = {"Decatur Day", "Decatur Evening", "Huntsville Day", "Huntsville Evening", "Distance Learning"}
Dim semester() As String = {"Fall 2010 semester", "Spring 2011 semester"}
[Code] .....
So I'm getting annoyed with this ffriend of min that keeps on asking for code off me for a VB assignemnt. Now I'd like to give him some code, but not the right code, (play a joke on him...he...he..). So thats the reason I'd like to write a infinite loop program for Internet Explorer. Would such Visual Basic program be possible?
I'm not going to write anything epic, but probably just the event handler to a button that keeps uploading internet explorer on a infinite loop after clicking. I know morally, this is wrong. I would rather be an ass than a lazy bastard.
I'm not even sure what I need to know. None the less lets say I got a timer with an if event to check if said event is triggered then it fires off some code. The problem is if said event is triggered it keeps firing off the code and I only need to do it one time. Whilst letting the timer keep checking if event happened. I hope I worded that right and here is a rough translation in code. [Code] Is there a way to keep checking if an event happened and only fire off the code one time?
View 1 RepliesI am trying to create a program that the user enters the number of enrollments for 5 different campuses during two semesters. I just got started and here is what I have so far but when I run the program it is stuck in an infinite loop and will not go to the next function. I am not sure how to end the loop.
Here is what I have so far:
Module Module1
Dim SIZE As Integer = 5
Dim campus() As String = {"Decatur Day", "Decatur Evening", "Huntsville Day", "Huntsville
[CODE]....
I have two forms. A main form and then another form that you can change settings in. Now when I click on the menu item to get to the settings form I get this error. "An error occurred creating the form. See Exception.InnerException for details. The error is: The form referred to itself during construction from a default instance, which led to infinite recursion. Within the Form's constructor refer to the form using 'Me.'"I've tried these codes.
frmSettings.Show()
Application.Run(frmSettings)
those didn't work so i tried these
dim settings as new form = frmSettings
settings.show()
dim settings as form
[code]....
and those didn't work. I'm using visual studio 2010 Pro.
i'm trying to make a loop with listbox1 that put the listbox1 item1 in textbox1 + listbox2 item1 in textbox2 and exexute the code then repeat for listbox1 item2 in texbox1 ecc...
[Code]...
Private Function ColumnEqual(ByVal A As Object, ByVal B As Object) As Boolean
[Code]...
Just a little frustrated with a simple error in a listbox result on a mobile application.Here is a sample of the results I should be getting:
The inputs are 50mph & 4.5 hours
Hour distance
1 50
[code].....
i have a listbox with 30 items. i trying to loop through all items in the listbox 1 by 1 and display each item in a text box using the code below.the problem i am having is when it gets to the last item in the listbox i get an error message.Public Class Form1 Private curNum As Integer
Private Sub Button1_Click(sender As System.Object, e As System.EventArgs) Handles Button1.Click
Timer1.Interval = 10000
Timer1.Start()
[Code]...
Well, i had a problem that SEEMED to be resolved, this was until today when it suddenly stopped working and started repeating the same item (See below)[code]...
View 8 RepliesI have a program which I'm designing to help organize and move some of my music around. I can create a play list and then add music to it, when I do this it copies the mp3 files to a specified folder and also updates a listbox with the content of that folder.
The code works, however when I run it the program locks up until everything has been copied, the listbox goes from blank at the start to suddenly showing the whole list.[code]...
I have a listbox with two columns. Each listbox item contains a horizontal stacked panel which in turn contains textblocks.
The listbox is empty, with each listbox item being added by the end-user through a couple of textboxes placed elsewhere. The first column accepts strings, and the second column accepts only percentages.
(I have attached a relevant portion of the event sub where a user is adding new rows.)
Private Sub btnAddItem_Click(sender As System.Object, e As System.Windows.RoutedEventArgs) Handles btnAddSplit.Click
'...
Dim ListBoxItemName As New TextBlock
[Code]....
I would like to be able to check every time the above event is fired that the column of percentages does not exceed 100%. I have a couple of labels below the listbox itself where I would like to show the running total and the remainder.
My questions are:
1) How can I loop through the second column of percentages to show the running total and remainder?
2) Is there something more suitable than a ListBox that could make this easier?
I want to retrieve all the items in a listbox with a For loop. there are only two itemsin the listbox. I'm able to retrieve the first item in the listbox when the counter of the for loop is 0. when it gets to 1 an IndexOutOfRange Exception is generated.
Here is my code.
Dim i As Integer
Dim count As Integer=Me.ListBox1.Items.count
Dim sel As String
For i=0 To count-1
sel=Me.ListBox1.Items.item(i).ToString
MsgBox(sel)
Next i
How to access the text of a List box control in a for or for each loop
[Code]...