[code]the main piece deals with the binding source filter. I've tried or/and. i tried to include that both codes in the string. i don't know what to do again i know you would recommend SQL but i don't know how to use that yet, so could you please recommend some bindingsourcefilter code to assist please. Its for a School project the search window looks like the attached picture
I am doing a simple database project.I need to give the input in the database which is an access db from my input form and i have managed to do this part right.then i need to retrieve the details from the db using multiple search fields and show them in the datagrid view.I have 8 search fields(5 textboxes and 3 combo boxes). I also have included 4 other buttons which respectively clears the search boxes;clear the results of the gridview; show all results from the database;go to the input form and offcourse 1 search button.now all the buttons working fine except the search button. actually when i click on the search button if i include sql query for all the search fields only the first one works and also if i have clicked any other buttons before clicking the search button nothing happens, no result is shown and it happens the same if i search once and clicked any other buttons and come back to search, no result. I need to show the results in the gridview depending on the user input on those search criterias. user should be able to search in any combinations.I am using the below codings in my search form. the combo boxes are not bound.datagrid is bound to database though.
Public Class Paxsearchfrm Private Sub Paxsearchfrm_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load 'TODO: This line of code loads data into the 'LAFDataSet.Table1' table. You can move, or remove it, as needed. End Sub
Currently I am searching through my list to find Customers that match on Address. I need to match on both address and city. How do I rewrite my lambda Expression to match both criteria?
I need some guidance on the best way to proceed with searching a file content. I have a large file (see attachment) that is in text form, some of these files could be upto 50 times as big, therefore creating a huge file. These files contain information that is produced from another application and therefore I am unable to change the format of the file.
Ok so basically heres what i need to do: Extract text from the webpage that meets a certain criteria. There will be a ton of these on 1 page and i would like to add them to a rich textbox on sperate lines.
I know that it needs to be in a loop and its needs to Parse the wepage(Dim web1 As String = Me.WebBrowser1.Document.Body.InnerText)
The criteria is: Starts with 1 to 4(random) integers, Followed by "my" then 13(random) numbers and letters. Or if it starts with "167my" + 6(random) number and letters.
Edit: Also im going to try to make it loop through a list of webpages to do this.
I'm in a bit of a quandry. I am trying to build a simple search form where the user selects the column title and in puts the criteria then clicks the search button. This is the code I am using
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click details = ComboBox2.Text 'column name selected by user specifics = TextBox1.Text 'criteria input by user
I have three controls on my form; Textbox1, cboCity, lstCity When something (lets say "a") is entered in the TextBox1; I want to get each and every item in combobox cboCity that starts with "a" and add them to listbox lstCity.
I've got a form that populates a DataGridView from an excel file. How would I filter that DataGridView so only the search criteria are visible. I need to search through 2 columns by all rows. I'm not very good with datasources I guess and can't figure out what all I need to accomplish this. DataSets, DataViews, DataTables.
I am building a real estate website. I have a table for properties (i.e. "houses"), a table for pictures, a table for features, etc. So each property's data comes from three, not only one table. I need to provide a function that retrieves requested property data depending on a search criteria, for example:
I have a code to search through a listbox with mutiple search criteria. Here is the code:[code]When I search for something, how do I make sure I do not obtain 2 of the same results, If both criteria are found, or if all three are found?
On my view there is a datatable holding a collection of ServerRow and 4 textboxes (Hostname, OS, Location, Zone). When the user types into any of the 4 boxes I want to immediately filter this list. I have this code setup and ready to go that on the set method of each textbox property I call the filter method.
Now onto the problem: if I have 4 criteria that means I have 2 to the power of 4 different scenarios. What I would like to do is write a linq statement with all of these scenarios dealt with such that if any of the properties are NullOrEmpty they will not be used in the Where clause and on the flip side if there is a value the corresponding field will be searched with a Contains.
for example dim Strto_check as string = "1+2-2" dim Listof_Illegalstrings = "~!@#$%^&*()_-+=-?/.,><|" ""
now i want a function to find out which is the invalid character available in the strto_check variable and then replace it with a standard place holder
I have finished my database using Dreamweaver ASP VBScript and Access, the only thing left is to create the searching system. My search form works fine when posting just one filed. The results page Recordset goes as follows.
Code:
I need 7 different fields on my search form, this what I did but it doesn't work.
Parameters:
Name: MMColParam Type: Text Value: Request.Form("Ref") Default value: 1
Name: MMColParam Type: Text Value: Request.Form("New_resale") Default value: 1
"Price" is a special one because this is a list menu with different amounts, like 50.000, 70.000, 90.000, and so one. The idea is to make this list menu post to the result page, only to display records under or equal to the given value. less or equal > than 50.000 or 70.000, etc.
I am working on a utility to reformat a text file. Working on language to remove duplicate record entries. However there are desirable ("keeper") duplicates and then those I want to remove. I handled the problem by temporarily assigning a unique number to each @D line, then stripping them off after I've removed duplicates. So far so good, except in removing unwanted duplicates I have an extra of the "keeper" duplicates left that doesn't get removed. See below. I am wondering if there is a way to search for a line in a textbox starting with a certain character, but is also proceeded by 2 blank lines and followed by 1 blank line. CODE IM USING TO REMOVE DUPS yet keep formatting with blank line separators, etc.:
I would like to query an Employee by matching First and Last name. Ideally, I'd like to be able to specify that in one EmployeeQueryRq QBFC object.
I think I have a start:
Dim EmployeeQueryRq As IEmployeeQuery EmployeeQueryRq = requestMsgSet.AppendEmployeeQueryRq() EmployeeQueryRq.ORListQuery.ListFilter.ORNameFilter.NameFilter.MatchCriterion.SetValue(ENMatchCriterion.mcContains) EmployeeQueryRq.ORListQuery.ListFilter.ORNameFilter.NameFilter.Name.SetValue(LastName)
Is there any way I can add an additional NameFilter to the same request? Or am I stuck walking a response list for the other criteria (albeit a smaller one limited to containing at least one value)?
I'm working on my first Visual basic program and I've hit a snag. I want to make a working search form that pulls data from an access database that i already have linked into my visual basic program.
Basically when they click search, i wan't it to check the textbox (lets say firstName.text box for now) for there name, then find all the entries in my database that have those names and display them in a grid.
I have a datatable as shown in the figure. Let me explain my required based on this image. I have 7 rows of data. The rows 1 and 2 contains columns till UnitSqcNo same. I want only row 3 among the two. In general I want select all the rows with distinct model, unittype, unit and rest with greater CompId. ie the table should look like
I have a DataGridView on a form that is being populated from a SQL table dataset by giving criteria from a previous form. I have 6 columns in the dataset, of which the last column should be combo box column containing items "Done" and "Pending". How do I make this bound column to a combo box column and display the value as well as the alternate item too in the combo box?
changing the way the site search is done from just search a phrase as one string to searching a phrase "as multiple words" search. For example, if I search "cute puppy" right now, it will search it for "cute puppy" as phrase and won't match just "cute" and "puppy". The way the search is implemented is by passing a search phrase to a Stored Procedure in SQL Server.So now, I need to change to site search so when "cute puppy" is searched, it will search two words.... "cute" and "puppy" instead of just "cute puppy". Below is how the store procedure is implemented
Im making a search function for an application and they need to be able to search by any value in the DB in any of the three tables. Im wondering the best wayto about this. 2 of the 3 tables have the same columns while the last one is totally different. Below is what I kinda "thought" itd look like but no.
"SELECT * FROM cases, opencases, staff WHERE Crime ='" & txtsearch.Text.ToString & "'"
I need to query the results the user can search for anyterm and if it matches something in the columns it return it to the user. Im wondering if the best way to go about this is to maybe query all the tables and then put all the matching records in a seperate table and the dgv look at that table or how to exactly go about it.
This is the code Imports System.Data, System.Data.OleDb Public Class Form1 Public CON As New OleDbConnection("Provider=Microsoft.Jet.OLEDB.4.0; Data Source =" & Application.StartupPath & "\bible.mdb") [Code] .....
I got that Error for data2.Fill(ds1, "Bible") Data type mismatch in criteria expression the combobox1 value is numbers
I tried this code Dim sql1 As String = "select distinct ChapterNum from Bible where BookNum ='" & Trim(ComboBox1.Text) & "'" And this code Dim sql1 As String = "select distinct ChapterNum from Bible where BookNum ='" & Val(ComboBox1.Text) & "'" And it still got the same error.
I have looked at this for hours and can't seem to figure out what is causing the datatype mismatch. I am trying to insert from asp.net to a access database
insert statement:(ignore the poor practice with the concat parameters)
Dim BSSQL As String = "insert into bodyshop (startdate, enddate, frontbump, rearbump, touchup, other, vehicleid)" & _ "values('" & StartDateBodyShopTXT.Text & "','" & FinishDateBodyShopTXT.Text & "','" &
[code]....
here is a snapshot of the table:the format of the yes/no fields is "true/false"
I want to retrieve query from MS.Access database criteria is between some date range,but I get the following error when execute my reader:Syntax error in date in query expression 'D_ate BETWEEN # @DateFrom # AND # @DateTo #'.
Dim StrSQL As String StrSQL = "Select * from Pla_Comp Where D_ate BETWEEN # @DateFrom # AND # @DateTo #" myCommand = New OleDbCommand(strSQL, conn)
I am trying to find a way to use a month calendar control as an object data source, such that when end user selects a given date, or a date range (1 week max), it will supply the date range criteria for an access query, and the results will wind up displaying in a data grid view below the month calendar. I am having a really hard time..
how to write the date criteria into the access query for something like this
I have an error "ERROR [22018] [Microsoft][ODBC Microsoft Access Driver] Data type mismatch in criteria expression". I am using VBdotNet2005 and MS Access as its database, and I can't really get the hang of this error.
How can I search, for example ID Number, and want to highlight the listview item found in search from my first form? I'm using combobox from my second form to search.